This report has been prepared to make available and archive the background scientific data and related information collected on groundwater during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The U.S. Department of Energy (DOE) published a notice in the Federal Register on May 17,1994 (Fed Regis. 5925638), withdrawing its notice of intent (Fed. Regis. 575433) of February 14,1992, to prepare the HGP-EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. The background scientific data and related information presented in this report were collected for the geothermal resource subzones in the Puna District on the island of Hawaii. The scientific background data and related information is being made available for use by others in conducting future scientific research in these areas. This report describes the environmental resources present in the areas studied (i.e., the affected environment) and does not represent an assessment of environmental impacts. This paper summarizes the current state of knowledge with respect to groundwater in the Puna District …

This report has been prepared to make available and archive the background scientific data and related information collected on geologic hazards during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The U.S. Department of Energy (DOE) published a notice in the Federal Register on May 17, 1994 (Fed Regis. 5925638) withdrawing its Notice of Intent (Fed Regis. 575433) of February 14, 1992, to prepare the HGP-EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated This report presents a review of current information on geologic hazards in the Hawaiian Islands. Interrelationships among these hazards are discussed. Probabilities of occurrence of given geologic hazards are provided in various regions where sufficient geologic or historical data are available. Most of the information contained herein is compiled from recent U.S. Geological Survey (USGS) publications and open-file reports. This report describes the natural geologic hazards present in the area and does not represent an assessment of environmental impacts. Geologic hazards originate both onshore and offshore. Onshore …

This report has been prepared to make available and archive the background scientific data and related information collected on ecological resources during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The U.S. Department of Energy (COE) published a notice in the Federal Register on May 17, 1994 (Fed. Regist. 5925638) withdrawing its Notice of Intent (Fed. Regst. 575433) of February 14, 1992, to prepare the HGP-EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. The background scientific data and related information presented in this report focus on several areas of Hawaii County, including the southeastern coast, a potential development corridor along the Saddle Road between Hilo and the North Kohala District on the northwestern coast, and on the southeastern coast of Maui. In this report, reference is made to these areas as study areas rather than as areas where proposed or alternative facilities of the HGP would be located. The resource areas addressed herein include terrestrial ecology, aquatic ecology, and marine …

SUPERCODE is a systems code used in designing tokamak devices and reactors. This report is divided into 4 chapters. Chapter one covers installing the code and directory organization. The execution of the code, command line editing and history, the shell language, classes, and shell input and output are discussed in chapter two. Chapter three covers the writing modules. In chapter four, the Consts module, Sys module, and Plot module are covered. At the end of the report, the need and use of SUPERCODE are summarized.

Mechanical design features of the reactor chamber for the HYLIFE-II inertial confinement fusion power plant are presented. A combination of oscillating and steady, molten salt streams (Li{sub 2}BeF{sub 4}) are used for shielding and blast protection of the chamber walls. The system is designed for a 6 Hz repetition rate. Beam path clearing, between shots, is accomplished with the oscillating flow. The mechanism for generating the oscillating streams is described. A design configuration of the vessel wall allows adequate cooling and provides extra shielding to reduce thermal stresses to tolerable levels. The bottom portion of the reactor chamber is designed to minimize splash back of the high velocity (>12 m/s) salt streams and also recover up to half of the dynamic head. Cost estimates for a 1 GWe and 2 GWe reactor chamber are presented.

This study investigates control strategies for coordinating the variable solar-optical properties of a dynamic building envelope system with a daylight controlled electric lighting system to reduce electricity consumption and increase comfort in the perimeter zone of commercial buildings. Control strategy design can be based on either simple, instantaneous measured data, or on complex, predictive algorithms that estimate the energy consumption for a selected operating state of the dynamic envelope and lighting system. The potential benefits of optimizing the operation of a dynamic envelope and lighting system are (1) significant reductions in electrical energy end-uses - lighting, and cooling due to solar and lighting heat gains - over that achieved by conventional static envelope and lighting systems, (2) significant reductions in peak demand, and (3) increased occupant visual and thermal comfort. The DOE-2 building energy simulation program was used to model two dynamic envelope and lighting systems, an automated venetian blind and an electrochromic glazing system, and their control strategies under a range of building conditions. The energy performance of simple control strategies are compared to the optimum performance of a theoretical envelope and lighting system to determine the maximum potential benefit of using more complex, predictive control algorithms. Results indicate …

The Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0843, for the Idaho National Engineering Laboratory (INEL) low-level and mixed waste processing. The original proposed action, as reviewed in this EA, was (1) to incinerate INEL`s mixed low-level waste (MLLW) at the Waste Experimental Reduction Facility (WERF); (2) reduce the volume of INEL generated low-level waste (LLW) through sizing, compaction, and stabilization at the WERF; and (3) to ship INEL LLW to a commercial incinerator for supplemental LLW volume reduction.

Miles of underground insulated piping will be installed at the Hanford site to transfer liquid waste. Significant cost savings may be realized by using pre-fabricated polyurethane foam insulated piping. Measurements were made on sections of insulated pipe to determine the insulation`s resistance to axial expansion of the pipe, the force required to compress the foam in the leg of an expansion loop and the time required for heat up and cool down of a buried piping loop. These measurements demonstrated that the peak axial force increases with the amount of adhesion between the encasement pipe and the insulation. The compressive strength of the foam is too great to accommodate the thermal growth of long straight pipe sections into the expansion loops. Mathematical models of the piping system`s thermal behavior can be refined by data from the heated piping loop.

This report describes the activities of the Nuclear Science Division for the 1993 calendar year. This was another significant year in the history of the Division with many interesting and important accomplishments. Activities for the following programs are covered here: (1) nuclear structure and reactions program; (2) the Institute for Nuclear and Particle Astrophysics; (3) relativistic nuclear collisions program; (4) nuclear theory program; (5) nuclear data evaluation program, isotope project; and (6) 88-inch cyclotron operations.

The Treated Effluent Disposal Facility Operator Training Station (TEDF OTS) is a computer based training tool designed to aid plant operations and engineering staff in familiarizing themselves with the TEDF Central Control System (CCS). It consists of PC compatible computers and a Programmable Logic Controller (PLC) designed to emulate the responses of various plant components connected to or under the control of the CCS. The system trains operators by simulating the normal operation but also has the ability to force failures of different equipment allowing the operator to react and observe the events. The paper describes organization, responsibilities, system configuration management activities, software, and action plans for fully utilizing the simulation program.

Mechanisms through which static magnetic fields interact with living systems are described and illustrated by selected experimental observations. These mechanisms include electrodynamic interactions with moving, ionic charges (blood flow and nerve impulse conduction), magnetomechanical interactions (orientation and translation of molecules structures and magnetic particles), and interactions with electronic spin states in charge transfer reactions (photo-induced electron transfer in photosynthesis). A general summary is also presented of the biological effects of static magnetic fields. There is convincing experimental evidence for magnetoreception mechanisms in several classes of lower organisms, including bacteria and marine organisms. However, in more highly evolved species of animals, there is no evidence that the interactions of static magnetic fields with flux densities up to 2 Tesla (1 Tesla [T] = 10{sup 4} Gauss) produce either behavioral or physiolocical alterations. These results, based on controlled studies with laboratory animals, are consistent with the outcome of recent epidemiological surveys on human populations exposed occupationally to static magnetic fields.

The author reviews phenomenologically interesting aspects of supersymmetry. First he points out that the discovery of the positron can be regarded as a historic analogue to the would-be discovery of supersymmetry. Second he reviews the recent topics on the unification of the gauge coupling constants, m{sub b}-M{sub {tau}} relation, proton decay, and baryogenesis. The author also briefly discusses the recent proposals to solve the problem of flavor changing neutral currents. Finally he argues that the measurements of supersymmetry parameters may probe the physics at the Planck scale.

Electromagnetic fields can be separated into near and far components. Near fields are extensions of static fields. They do not radiate, and they fall off more rapidly from a source than far fields. Near fields can accelerate particles, but the ratio of acceleration to source fields at a distance R, is always less than R/{lambda} or 1, whichever is smaller. Far fields can be represented as sums of plane parallel, transversely polarized waves that travel at the velocity of light. A single such wave in a vacuum cannot give continuous acceleration, and it is shown that no sums of such waves can give net first order acceleration. This theorem is proven in three different ways; each method showing a different aspect of the situation.

Human-health impacts, especially to the surrounding public, are extremely difficult to assess at installations that contain multiple waste sites and a variety of mixed-waste constituents (e.g., organic, inorganic, and radioactive). These assessments must address different constituents, multiple waste sites, multiple release patterns, different transport pathways (i.e., groundwater, surface water, air, and overland soil), different receptor types and locations, various times of interest, population distributions, land-use patterns, baseline assessments, a variety of exposure scenarios, etc. Although the process is complex, two of the most important difficulties to overcome are associated with (1) establishing an approach that allows for modifying the source term, transport, or exposure component as an individual module without having to re-evaluate the entire installation-wide assessment (i.e., all modules simultaneously), and (2) displaying and communicating the results in an understandable and useable maimer to interested parties. An integrated, physics-based, compartmentalized approach, which is coupled to a Geographical Information System (GIS), captures the regional health impacts associated with multiple waste sites (e.g., hundreds to thousands of waste sites) at locations within and surrounding the installation. Utilizing a modular/GIS-based approach overcomes difficulties in (1) analyzing a wide variety of scenarios for multiple waste sites, and (2) communicating results from a complex …

This report presents summaries and interpretations of the environmental monitoring data collected during 1993 at Pantex Plant. Additionally, it outlines site environmental management performance, summarizes compliance with applicable environmental regulations, and describes significant programs and achievements. Environmental monitoring is composed of two principal collection and analysis activities for radiological and nonradiological constituents: (1) effluent monitoring involving liquid and airborne effluents to characterize and quantify releases and (2) environmental surveillance involving water, soil, vegetation, and biota and measurement of external radiation to characterize environmental impacts of Pantex Plant. Data are used to assess impacts of operations to the public and the environment and to demonstrate compliance with applicable standards for both radiological and nonradiological contaminants. In 1993 more than 270 onsite and offsite locations were monitored regularly with 4000 samples collected and analyzed. Data from a location at the US Department of Agriculture Bushland Agricultural Research Service and historical data are also presented for reference.

The AMTEX Partnership{trademark} is a collaborative research and development program among the US Integrated Textile Industry, the Department of Energy (DOE), the DOE laboratories, other federal agencies and laboratories, and universities. The goal of AMTEX is to strengthen the competitiveness of this vital industry, thereby preserving and creating US jobs. The operational and program management of the AMTEX Partnership is provided by the Program Office. This report is produced by the Program Office on a quarterly basis and provides information on the progress, operations, and project management of the partnership.

TAISIR, Temperature and Imaging System InfraRed, is a nominally satellite based platform for remote sensing of the earth. One of its design features is to acquire atmospheric data simultaneous with ground data, resulting in minimal dependence on external atmospheric models for data correction. Extensive modeling of the rms error of determining a ground temperature and emissivity for a gray body has been performed as a function of integration time, spectroscopic resolution of the system, ground emissivity, atmospheric variables, and atmospheric data accuracy. We find that increased resolution improves measurement accuracy by emphasizing those regions where the atmospheric transmission is highest and atmospheric emission/absorption lowest. We find rms temperature errors {le}1K and rms emissivity errors <0.01 are obtainable for reasonable seeing and with sufficient information about the atmosphere. A new method is developed for modeling the dependence of the band-averaged transmission and emission. Monte Carlo simulations of satellite data taken using a multi-angle technique are used to derive signal-to-noise requirements. The applicability of those results to the TAISIR system requirements are discussed.

A novel technique has been developed to synthesize in large quantities an O{sub 2} molecule that is unsymmetrically labeled with the oxygen isotopes oxygen-16 and oxygen-18. This unusual molecule, {sup 16}O{sup 18}O, has been utilized as a unique spectroscopic probe of the mechanism of metabolism in living organisms. Preparation of this molecule requires prior synthesis of the exotic precursor hypofluorous acid, HOF, and an improved method for synthesizing this precursor has recently been developed that permits the preparation of essentially unlimited quantities of the labeled oxygen. This, in turn, has made it practical to use this oxygen in Raman-spectroscopic studies of the mechanism by which O{sub 2} is reduced by the enzyme cytochrome oxidase, a key step in the metabolic utilization of oxygen by living organisms. The results indicate that the interaction of O{sub 2} with the iron of the enzyme may be represented: Fe{sup 2+} + O{sub 2} {yields} Fe{sup 2+}-O{sub 2} {yields} Fe{sup 3+}-OOH{sup {minus}} {yields} Fe{sup 4+} = O {yields} Fe{sup 3+}-OH{sup {minus}}.

Using calculational methods based on R-matrix theory, we have obtained cross sections and spectra for a number of charged-particle reactions, including those initiated by d+t, t+t, and t+{sup 6}Li. The three-body resonance model used to calculate the spectra resembles the sequential-decay model, but it sometimes gives different results. Contributions from resonances involving the detected particle can produce the broad structure underlying the narrow peaks in the spectra that is often attributed to ``three-body phase space.`` We will show examples of calculated cross sections and spectra, compared to the measured data.

A dual-arm manipulation module is under development for application in decontamination and decommissioning (D&D) tasks. The development is led by Oak Ridge National Laboratory with support from Sandia National Laboratories, and with university and industry participation. The project is part of the Robotics Technology Development Program funded by the US Department of Energy, Environmental Restoration and Waste Management, Office of Technology Development. The dual-arm module is designed to provide dexterous manipulation capability for remote characterization, decontamination, and dismantlement operations, and the module is reconfigurable to meet various deployment requirements. Remote manipulation capability can benefit D&D activities through reduced worker exposure to both contaminant and industrial hazards. When tasks conditions permit, increased use of robotic features reduce costs by increased efficiency of operation.

Statistical Process Control testing of manufacturing processes began back in the 1940`s with the development of Process Control Charts by Dr. Walter A. Shewart. Sandia National Laboratories has developed an application of the SPC method for performance testing of electronic security equipment. This paper documents the evaluation of this testing methodology applied to electronic security equipment and an associated laptop computer-based system for obtaining and analyzing the test data. Sandia developed this SPC sensor performance testing method primarily for use on portal metal detectors, but, has evaluated it for testing of an exterior intrusion detection sensor and other electronic security devices. This method is an alternative to the traditional binomial (alarm or no-alarm) performance testing. The limited amount of information in binomial data drives the number of tests necessary to meet regulatory requirements to unnecessarily high levels. For example, a requirement of a 0.85 probability of detection with a 90% confidence requires a minimum of 19 alarms out of 19 trials. By extracting and analyzing measurement (variables) data whenever possible instead of the more typical binomial data, the user becomes more informed about equipment health with fewer tests (as low as five per periodic evaluation).

Due to recent developments in elastomer technology, seismic isolation using elastomer bearings is rapidly becoming an acceptable design tool to enhance structural seismic margins and to protect people and equipment from earthquake damage. With proper design of isolators, high-energy seismic input motions are transformed into low-frequency, low energy harmonic motions and the accelerations acting on the isolated building are significantly reduced. Several alternatives exist for the modeling of the isolators. This study is concerned with the use of a viscoelastic model to predict the seismic response of base-isolated buildings. The in-house finite element computer code has been modified to incorporate a viscoelastic spring element, and several simulations are performed. Then, the computed results have been compared with the corresponding observed data recorded at the test facility.

This is a continuing research effort into the new field of measuring resistivity of geological formations from within cased wells. Additional data confirming the feasibility of the technology is to be taken in a test well with the existing stop-hold-and-lock apparatus which is called the Thru Casing Resistivity Apparatus (TCRA). After that data is obtained, the already existing mechanical apparatus developed in an earlier phase of the project will then be modified and new electronic components will be fabricated to test the concept of a moving apparatus called the Moving Thru Casing Resistivity Apparatus (Moving TCRA). These steps are considered sufficient for subsequent commercial development by industry. The study by ParaMagnetic Logging, Inc. of measuring resistivity through casing with the Thru Casing Resistivity Apparatus is of great importance to the oil and gas industries. It is important to measure resistivity through casing for at least the following reasons: locating bypassed oil and gas; measuring water breakthrough during water flooding operations; reservoir evaluation; measurements through a drill string when the drilling bit is stopped; and environmental monitoring of disposal wells, water wells, etc.

We have proposed measuring the acceleration of antiprotons in the Earth`s gravitational field by launching antiprotons from a thermal distribution at 4 K upwards against the force of gravity and measuring their time-of-flight (TOF). The TOF distribution thus obtained will exhibit a cut-off representing the minimum kinetic energy necessary to reach the detector at the top of the experiment. The cut-off time is independent of the inertial mass of the particles and is a direct measure of g for the particles studied. We propose to compare the cut-off time, and thereby g, of negative hydrogen ions and antiprotons. The single most difficult problem to be solved for this method consists of shielding all stray-electric fields to a level where the force of gravity is dominating force acting on the particle. Alternative methods for reducing the effect of stray-electric fields are discussed and a brief analysis of experimental possibilities using neutral antihydrogen atoms is presented.