Report presenting an experimental investigation concerned primarily with the extension of test data on the drag of revolving disks, cylinders, and streamline rods to high Mach numbers and Reynolds numbers. The tests generally confirm earlier theories and add in some new results. One of the primary findings of interest is that skin friction does not depend on Mach number.

Investigations were undertaken to improve the ailerons of a P-51 fighter so as to obtain greater effectiveness without increasing the stick forces. Modifications consisted of increasing the deflection range of the aileron to 70 percent and changing the original concave section to a thick section with beveled trailing edge. Results of the modified ailerons showed an increase in effectiveness over the original aileron of 70 percent at low speed and 55 percent at high speeds.

Report presenting flight measurements made on a modern pursuit airplane to determine the approximate magnitude of the horizontal tail loads in accelerated flight. Pressures at a few points were used as an index of the tail loads by correlating these pressures with complete pressure-distribution data obtained in the NACA full-scale tunnel.

From Summary: "A general representation of fan and turbine arrangements on a single classification chart is presented which is made possible by a particular definition of the stage of an axial-flow fan or turbine. Several unconventional fan and turbine arrangements are indicated and the applications of these arrangements are discussed."

Report details the development of design equations for double-panel, air-heated windshields with ice prevention properties. The application of the equations and suggestions for experimental flight testing are described.

The methods of NACA TN No. 995 have been slightly modified and extended in include flows with circulation by considering the alteration of the singularities of the incompressible solution due to the presence of the hypergeometric functions in the analytic continuation of the solution. It was found that for finite Mach numbers the only case in which the nature of the singularity can remain unchanged is for a ratio of specific heats equal to -1. From a study of two particular flows it seems that the effect of geometry cannot be neglected, and the conventional "pressure-correction" formulas are not valid, even in the subsonic region if the body is thick, especially if there is a supersonic region in the flow.

Report presenting a series of wind-tunnel tests made in the 7- by 10-foot tunnel of the Curtiss XBTC-2 model with power. The object of the tests was to determine and to improve, as necessary, the complete aerodynamic characteristics of the model. The report includes the results of the longitudinal stability investigation of the original model along with results from tests of various modifications.

Note presenting computations made to determine the effects of some airplane design trends on the fin area and the dihedral angle required for lateral stability. The specific factors studied were wing loading, moments of inertia in roll and yaw, wing chord, and tail length. The results of the computations are presented in the form of diagrams of variations of fin area with dihedral angle for neutral stability.

Note presenting a theoretical investigation made of the hydrodynamic pitching moments experienced by V-bottom seaplanes during step-landing impacts. The entire immersion process is analyzed from the instant of initial contact until the seaplane rebounds from the water surface.

Report presenting an investigation of a 10.7-percent-thick symmetrical tail section equipped with a flat-side airfoil-chord flap with a flap-chord overhang and a plain flap-chord tab. Airfoil lift, drag, pitching-moment, and flap and tab hinge-moment characteristics were determined at various flap and tab deflections.

Note presenting a comparison between the measured take-off ground run of an airplane equipped with seven different propeller-engine gear-ratio combinations and the computed distances by two different methods. Results indicated that the values of ground run calculated by Diehl's approximate method checked experimental values with 7 percent but were in error as much as 10 to 15 percent under certain conditions. Improved methods of thrust computation may be required in order to avoid large errors and before any more rigorous methods can be substituted for Diehl's method.

"The results obtained from a series of flight measurements of atmospheric turbulence within convective-type clouds and from meteorological soundings are presented together with descriptions of the flights and concurrent weather conditions. These results are presented to provide a background of experience for the forecaster and pilot by illustrating the turbulence conditions as indicated by effective gust velocities in convective-type clouds under spring and summer weather conditions along the eastern coast of the United States" (p. 1).

Note presenting a description of the synthesis of isobutylbenzene, sec-butylbenzene, and tert-butylbenzene in 11-gallon quantities. The physical properties are tabulated and freezing curves are plotted for the five hydrocarbons.

Report presenting an approximate method of applying the available data on various types of flaps in the design of fighter brakes together with several examples of its use. The computed effects of flap type, size, location, and deflection as well as the effects of altitude and initial velocities on braking characteristics are also shown in some examples using the method to determine various flap arrangements.

Report presenting force-test measurements in two-dimensional flow in the 4- by 6-foot vertical tunnel of the characteristics of an NACA 0015 airfoil equipped with a plain flap with a chord 30 percent of the airfoil chord and a plain tab with a chord 20 percent of the flap chord. Results regarding lift, hinge moment of flap, pitching moment, drag, and tab characteristics are provided.

From Summary: "Tests have been made to determine the effect of a gap at the flap nose upon the aerodynamic section characteristics of an NACA 0009 airfoil with a plain flap and tab. The results are presented in the form of airfoil and flap section characteristics for several flap deflections, tab deflections, and for four sizes of gap."

Report presenting an investigation in the 7- by 10-foot wind tunnel of an NACA 23012 airfoil with a 30 percent-chord Maxwell leading-edge slat and a slotted and a split flap. The main purpose was to determine the optimum slot cap of the Maxwell slat for, and the aerodynamic section characteristics of, the airfoil with several deflections for both types of flaps. Curves of lift, drag, and pitching-moment characteristics for optimum arrangements are provided.

Report summarizes the available hinge-moment data for unshielded horn-balanced control surfaces. The purpose is to correlate the available data to assist with estimating the balance characteristics for use in the design and alteration of control surfaces with horn balances. Plan forms and variation of incremental hinge-moment-coefficient slopes with balance coefficients are presented.

Report presenting drag measurements in the two-dimensional low-turbulence tunnel of an available 100-inch-chord model of the NACA 23016 wing section. Results regarding the curves of section drag coefficient plotted against Reynolds number for various surface conditions and lift coefficients, variation of drag coefficient with lift coefficient, and effects of skin friction are provided.

Report presenting an investigation of a slot-lip aileron and a plain aileron, singly and in combination, on an NACA 23012 wing with a full-span flap. The characteristics of these lateral-control devices were essentially the same as those of similar devices on the wing with full-span NACA slotted flaps as tested in a previous investigation.

"Formulas for the calculation of hinge-moment characteristics of an elevator with a spring tab have been developed in terms of basic aerodynamic parameters, spring stiffness, and airspeed. The formulas have been used in a study of the stick-force gradients on a pursuit airplane equipped with an elevator with a spring tab. Charts are presented showing the variation of stick-force gradient in accelerated flight over a large range of speed and the complete range of spring stiffness for various center-of-gravity locations, altitudes, and airplane sizes" (p. 1).

Report presenting hinge-moment, lift, pressure difference across the balance, and pressure-distribution measurements in the two-dimensional test section of the stability tunnel on a 0.60 aileron-chord sealed internal-balance aileron on a specified NACA airfoil. The primary test objective was to determine the effect of speed on the action of the aileron.

"Hinge-moment, lift, and pressure-distribution measurements were made in the two-dimensional test section of the NACA stability tunnel on a blunt-nose balance-type aileron on an NACA 66,2-216 airfoil at speeds up to 360 miles per hour corresponding to a Mach number of 0.475. The tests were made primarily to determine the effect of speed on the action of this type of aileron. The balance-nose radii of the aileron were varied from 0 to 0.02 of the airfoil chord and the gap width was varied from 0.0005 to 0.0107 of the airfoil chord. Tests were also made with the gap sealed" (p. 1).

Analysis was made to determine characteristics required of a balancing-tab system for ailerons in order to reduce aileron stick forces to any desired magnitude. Series of calculations based on section data were made to determine balancing-tab systems of various chord tabs and ailerons that will give, for a particular airplane, zero rate of aileron hinge moment with aileron deflection and yet will produce same maximum rate of roll as a plain unbalanced 15-percent chord aileron of same span. Effects of rolling velocity and of forces in tab link on aileron hinge moments have been included.