This program investigated development of a multiple beam inductive output tube (IOT) to produce 30 MW pulses at 200 MHz. The program was successful in demonstrating feasibility of developing the source to achieve the desired power in microsecond pulses with 70% efficiency. The predicted gain of the device is 24 dB. Consequently, a 200 kW driver would be required for the RF input. Estimated cost of this driver is approximately $1.25 M. Given the estimated development cost of the IOT of approximately $750K and the requirements for a test set that would significantly increase the cost, it was determined that development could not be achieved within the funding constraints of a Phase II program.

Due to the materials that are processed through 2H Evaporator, scale is constantly being deposited on the surfaces of the evaporator pot. In order to meet the requirements of the Nuclear Criticality Safety Analysis/Evaluation (NCSA/NCSE) for 2H Evaporator, inspections of the pot are performed to determine the extent of scaling. Once the volume of scale reaches a certain threshold, the pot must be chemically cleaned to remove the scale. Prior to cleaning the pot, samples of the scale are obtained to determine the concentration of uranium and plutonium and also to provide information to assist with pot cleaning. Savannah River National Laboratory (SRNL) was requested by Liquid Waste Organization (LWO) Engineering to obtain these samples from two locations within the evaporator. Past experience has proven the difficulty of successfully obtaining solids samples from the 2H Evaporator pot. To mitigate this risk, a total of four samplers were designed and fabricated to ensure that two samples could be obtained. Samples had previously been obtained from the cone surface directly below the vertical access riser using a custom scraping tool. This tool was fabricated and deployed successfully. A second scraper was designed to obtain sample from the nearby vertical thermowell and a …

This report focuses on the controversy surrounding 527 groups in terms of their increased campaign-related activity and their regulation by the federal government. The report describes the origins of the contention and how groups that may not be necessarily "political committees" under FECA (Federal Election Campaign Act) guidelines are still eligible for beneficial tax deductions. This report also examines the extent to which FECA regulates such organizations.

The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of illness and injury surveillance activities that provide an early warning system to detect health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence, occupational injuries and illnesses, and disabilities and deaths among current workers.

The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of illness and injury surveillance activities that provide an early warning system to detect health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence, occupational injuries and illnesses, and disabilities and deaths among current workers.

The report discusses the 2008 farm bill (H.R. 2419), covering a wide range of programs including The Food, Conservation, and Energy Act of 2008, farm credit, agricultural conservation, research, rural development, and foreign and domestic food programs, among others.

A letter report issued by the Government Accountability Office with an abstract that begins "The 2010 Census will be the most expensive census in our nation's history, even after adjusting for inflation. The Census Bureau (Bureau) estimates that the life cycle cost of the 2010 Census will be from $13.7 billion to $14.5 billion. GAO was asked to (1) assess the extent to which the Bureau's 2010 Census life cycle cost estimate adheres to characteristics defined for high-quality cost estimation, (2) report on the relationship between the estimate and the Bureau's budget, and (3) assess whether the Bureau's existing policies and resources are sufficient to conduct cost estimation. To assess the reliability of the Bureau's cost estimate, GAO analyzed the Bureau's methods and approaches to determine if the estimate is well-documented, comprehensive, accurate, and credible."

The purpose of this report is to provide status of the ingest software used to process instrument data for the Atmospheric Radiation Measurement (ARM) Program Climate Research Facility (ACRF). The report is divided into 4 sections: (1) for news about ingests currently under development, (2) for current production ingests, (3) for future ingest development plans, and (4) for information on retired ingests. Please note that datastreams beginning in “xxx” indicate cases where ingests run at multiple ACRF sites, which results in a datastream(s) for each location.

Although turbulent flows are common in the world around us, a solution to the fundamental equations that govern turbulence still eludes the scientific community. Turbulence has often been called one of the last unsolved problem in classical physics, yet it is clear that the need to accurately predict the effect of turbulent flows impacts virtually every field of science and engineering. As an example, a critical step in making modern computational tools useful in designing aircraft is to be able to accurately predict the lift, drag, and other aerodynamic characteristics in numerical simulations in a reasonable amount of time. Simulations that take months to years to complete are much less useful to the design cycle. Much work has been done toward this goal (Lee-Rausch et al. 2003, Jameson 2003) and as cost effective accurate tools for simulating turbulent flows evolve, we will all benefit from new scientific and engineering breakthroughs. The problem of simulating high Reynolds number (Re) turbulent flows of engineering and scientific interest would have been solved with the advent of Direct Numerical Simulation (DNS) techniques if unlimited computing power, memory, and time could be applied to each particular problem. Yet, given the current and near future computational …

The potential to save trillions of BTU’s in energy usage and billions of dollars in cost on an annual basis based on use of higher strength steel in major oil and gas transmission pipeline construction is a compelling opportunity recognized by both the US Department of Energy (DOE). The use of high-strength steels (X100) is expected to result in energy savings across the spectrum, from manufacturing the pipe to transportation and fabrication, including welding of line pipe. Elementary examples of energy savings include more the 25 trillion BTUs saved annually based on lower energy costs to produce the thinner-walled high-strength steel pipe, with the potential for the US part of the Alaskan pipeline alone saving more than 7 trillion BTU in production and much more in transportation and assembling. Annual production, maintenance and installation of just US domestic transmission pipeline is likely to save 5 to 10 times this amount based on current planned and anticipated expansions of oil and gas lines in North America. Among the most important conclusions from these studies were: • While computational weld models to predict residual stress and distortions are well-established and accurate, related microstructure models need improvement. • Fracture Initiation Transition Temperature (FITT) …

This report provides an overview of Advanced Research Projects Agency - Energy (ARPA-E) design. The report discusses the legislative origins and policy debates prior to ARPA-E authorization and Bush administration response to ARPA-E authorization.

A breakthrough has been discovered for controlling seismic sources to generate selectable low frequencies. Conventional seismic sources, including sparkers, rotary mechanical, hydraulic, air guns, and explosives, by their very nature produce high-frequencies. This is counter to the need for long signal transmission through rock. The patent pending SeismicPULSER{trademark} methodology has been developed for controlling otherwise high-frequency seismic sources to generate selectable low-frequency peak spectra applicable to many seismic applications. Specifically, we have demonstrated the application of a low-frequency sparker source which can be incorporated into a drill bit for Drill Bit Seismic While Drilling (SWD). To create the methodology of a controllable low-frequency sparker seismic source, it was necessary to learn how to maximize sparker efficiencies to couple to, and transmit through, rock with the study of sparker designs and mechanisms for (a) coupling the sparker-generated gas bubble expansion and contraction to the rock, (b) the effects of fluid properties and dynamics, (c) linear and non-linear acoustics, and (d) imparted force directionality. After extensive seismic modeling, the design of high-efficiency sparkers, laboratory high frequency sparker testing, and field tests were performed at the University of Texas Devine seismic test site. The conclusion of the field test was that extremely high …

The "criticality" or k-eigenvalue of a nuclear system determines whether the system is critical (k=1), or the extent to which it is subcritical (k<1) or supercritical (k>1). Calculations of k are frequently performed at nuclear facilities to determine the criticality of nuclear reactor cores, spent nuclear fuel storage casks, and other fissile systems. These calculations can be expensive, and current Monte Carlo methods have certain well-known deficiencies. In this project, we have developed and tested a new "functional Monte Carlo" (FMC) method that overcomes several of these deficiencies. The current state-of-the-art Monte Carlo k-eigenvalue method estimates the fission source for a sequence of fission generations (cycles), during each of which M particles per cycle are processed. After a series of "inactive" cycles during which the fission source "converges," a series of "active" cycles are performed. For each active cycle, the eigenvalue and eigenfunction are estimated; after N >> 1 active cycles are performed, the results are averaged to obtain estimates of the eigenvalue and eigenfunction and their standard deviations. This method has several disadvantages: (i) the estimate of k depends on the number M of particles per cycle, (iii) for optically thick systems, the eigenfunction estimate may not converge due …

Earthquake source parameters underpin several aspects of nuclear explosion monitoring. Such aspects are: calibration of moment magnitudes (including coda magnitudes) and magnitude and distance amplitude corrections (MDAC); source depths; discrimination by isotropic moment tensor components; and waveform modeling for structure (including waveform tomography). This project seeks to improve methods for and broaden the applicability of estimating source parameters from broadband waveforms using the Cut-and-Paste (CAP) methodology. The CAP method uses a library of Green’s functions for a one-dimensional (1D, depth-varying) seismic velocity model. The method separates the main arrivals of the regional waveform into 5 windows: Pnl (vertical and radial components), Rayleigh (vertical and radial components) and Love (transverse component). Source parameters are estimated by grid search over strike, dip, rake and depth and seismic moment or equivalently moment magnitude, MW, are adjusted to fit the amplitudes. Key to the CAP method is allowing the synthetic seismograms to shift in time relative to the data in order to account for path-propagation errors (delays) in the 1D seismic velocity model used to compute the Green’s functions. The CAP method has been shown to improve estimates of source parameters, especially when delay and amplitude biases are calibrated using high signal-to-noise data from …

As part of the proficiency training for the Radiological Mapping mission of the Aerial Measuring System (AMS), a survey team from the Remote Sensing Laboratory-Nellis (RSL-Nellis) conducted an aerial radiological survey of selected areas of the city of North Las Vegas for the purpose of mapping natural radiation background and locating any man-made radioactive sources. Survey areas were selected in collaboration with the City Manager's office and included four separate areas: (1) Las Vegas Motor Speedway (10.6 square miles); (2) North Las Vegas Downtown Area (9.2 square miles); (3) I-15 Industrial Corridor (7.4 square miles); and (4) Future site of University of Nevada Las Vegas campus (17.4 square miles). The survey was conducted in three phases: Phase 1 on December 11-12, 2007 (Areas 1 and 2), Phase 2 on February 28, 2008 (Area 3), and Phase 3 on March 19, 2008 (Area 4). The total completed survey covered a total of 44.6 square miles. The flight lines (without the turns) over the surveyed areas are presented in Figures 1, 2, 3, and 4. A total of eight 2.5-hour-long flights were performed at an altitude of 150 ft above ground level (AGL) with 300 feet of flight-line spacing. Water line and …

This report discusses the Afghanistan's political transition, which was completed with the convening of a parliament in December 2005, but since then insurgent threats to Afghanistan's government have escalated to the point that some experts are questioning the future of U.S. stabilization efforts.

A letter report issued by the Government Accountability Office with an abstract that begins "Since 2002, the United States has worked to develop the Afghan National Security Forces (ANSF). The Department of Defense (Defense), through its Combined Security Transition Command-Afghanistan (CSTC-A), directs U.S. efforts to develop the Afghan National Army (ANA) and, in conjunction with the Department of State (State), the Afghan National Police (ANP). To follow up on recommendations from GAO's 2005 report on the ANSF, GAO analyzed the extent to which U.S. plans for the ANSF contain criteria we recommended. GAO also examined progress made and challenges faced in developing the ANA and ANP. To address these objectives, GAO reviewed Defense, State, and contractor documents and met with cognizant officials. GAO has prepared this report under the Comptroller General's authority to conduct evaluations on his own initiative."

This report details the process by which the president must confirm their budget through Congress. Moreover, this report focuses specifically on the justifications for spending requests.

This report discusses the agricultural export provisions in the 2008 Farm Bill. It discusses programs that deal with U.S. agricultural exports that are a major focus of Title III, the Food, Conservation, and Energy Act of 2008 (P.L. 110-246, H.R. 6124).

This report discusses the farm bill (P.L. 110-234) that will authorize and direct the implementation of the U.S. Department of Agriculture's (USDA's) major programs across the spectrum of its mission areas through FY2012. The enacted bill reorganizes the Department's research, extension, and economics mission area, which currently comprises four agencies that separately administer intramural and extramural programs supporting agricultural research and development (R&D).

This report summarizes some of the domestic agriculture and forestry provisions in the Lieberman-Warner Climate Security Act of 2008 (S. 3036, formerly S. 2191), as ordered reported out of the Senate Committee on Environment and Public Works in December 2007.

The report discusses the KC-X program which is expected to acquire 179 new, commercial, off-the-shelf airliners modified to accomplish air refueling.

A letter report issued by the Government Accountability Office with an abstract that begins "In 2006, a Los Alamos National Laboratory (LANL) contract employee unlawfully removed classified information from the laboratory. This was the latest in a series of high-profile security incidents at LANL spanning almost a decade. LANL conducts research on nuclear weapons and other national security areas for the National Nuclear Security Administration (NNSA). GAO was asked to (1) identify LANL's major programs and activities and how much they rely on classified resources; (2) identify initiatives LANL is taking to reduce and consolidate its classified resources and physical footprint and the extent to which these initiatives address earlier security concerns; and (3) determine whether its new management approaches will sustain security improvements over the long-term. To carry out its work, GAO analyzed LANL data; reviewed policies, plans, and budgets; and interviewed officials."

The report discusses the annual budget resolution sets forth total spending and revenue levels for at least five fiscal years.