The International Coal Statistics Data Base (ICSD) is a microcomputer-based system which contains information related to international coal trade. This includes coal production, consumption, imports and exports information. The ICSD is a secondary data base, meaning that information contained therein is derived entirely from other primary sources. It uses dBase III+ and Lotus 1-2-3 to locate, report and display data. The system is used for analysis in preparing the Annual Prospects for World Coal Trade (DOE/EIA-0363) publication. The ICSD system is menu driven and also permits the user who is familiar with dBase and Lotus operations to leave the menu structure to perform independent queries. Documentation for the ICSD consists of three manuals -- the User's Guide, the Operations Manual, and the Program Maintenance Manual. This Program Maintenance Manual provides the information necessary to maintain and update the ICSD system. Two major types of program maintenance documentation are presented in this manual. The first is the source code for the dBase III+ routines and related non-dBase programs used in operating the ICSD. The second is listings of the major component database field structures. A third important consideration for dBase programming, the structure of index files, is presented in the listing …

Primary design considerations for the Compact Ignition Tokamak toroidal field-coil cases are yield strength and toughness in the temperature range from 77 to 300 K. Type 21-6-9 stainless steel, also still known by its original Armco Steel Company trade name Nitronic 40, is the proposed alloy for this application. It has high yield strength and usually adequate base metal toughness, but weldments in thick sections have not been adequately characterized in terms of mechanical properties or hot-cracking propensity. In this study, weldability of the alloy in heavy sections and the mechanical properties of the resultant welds were investigated including tensile yield strength and Charpy V-notch toughness at 77 K and room temperature. Weldments were made in four different base metals using seven different filler metals. None of the weldments showed any indication of hot-cracking problems. All base metals, including weldment heat-affected zones, were found to have adequate strength and impact toughness at both test temperatures. Weld metals, on the other hand, except ERNiCr-3 and ENiCrFe-3 had impact toughnesses of less than 67 J at 77 K. Inconel 82 had an average weld metal impact toughness of over 135 J at 77 K, and although its strength at 77 K is …

This report describes progress on research during the eleventh quarter of this contract dealing with applications of coal pretreatment techniques in coal/oil co-processing and direct hydroliquefaction. The objectives of the project are to investigate various coal pretreatment techniques and to determine the effect of these pretreatment procedures on the reactivity of the coal. Reactivity enhancement will be evaluated under both direct hydroliquefaction and co-processing conditions. Coal conversion utilizing low rank coals and low and severity conditions (reaction temperatures generally less than 350{degrees}C) is the primary focus of the liquefaction experiments, as it is expected that the effect of pretreatment conditions and the attendant reactivity enhancement will be greatest for these coals and at these conditions. This document presents a summary of results for the first set of a series of runs intended to simulate operation of a two-stage integrated liquefaction reactor train. These studies were designed to investigate the effect of the severity of the first stage liquefaction process on the required severity and resulting yields from the second stage. Process conditions were varied between thermal and catalytic for both stages, and from temperatures of 350 to 400{degrees}C at a nominal residence time of 30 minutes. These data will provide …

Eleven 17 m long, 40 mm aperture SSC R D superconducting collider dipole magnets, built at BNL, have been extensively tested at BNL and Fermilab during 1990--91. Quench performance of these magnets and details of their mechanical behavior are presented. 7 refs., 5 figs.

This report documents the technical progress in investigations. The first investigation is concerned with the measurement of magnetic fields in support of epidemiogical and in vitro studies of biological field effects. NIST cohosted a workshop on exposure and biological parameters that should be considered during the vitro studies with extremely low frequency (ELF) magnetic and electric fields. Also, equations were developed to predict the magnetic field in a parallel plate magnetic field exposure system. The second investigation is concerned with two different activities: the detection of trace levels of S{sub 2}F{sub 10} in SF{sub 6} and the development of an improved stochastic analyzer for pulsating phenomena (SAPP). The detection of S{sub 2}F{sub 10} in the presence of SF{sub 6} using mass-spectrometric detection coupled to a gas chromatograph is difficult because of the similar mass spectra. A technique is described that enables the detection of S{sub 2}F{sub 10} in gaseous SF{sub 6} down to the ppb level using a modified gas chromatograph-mass spectrometer. The new system was applied to an investigation of the stochastic behavior of negative corona (Trichel pulses) and the effect of a dielectric barrier on these discharges. The third investigation is concerned with breakdown and prebreakdown phenomena in …

The investigation described in this report acquired experimental information about how materials simulating transuranic (TRU) waste compact under axial compressive stress, and used these data to define a model for use in the Waste Isolation Pilot Plant (WIPP) disposal room analyses. The first step was to determine compaction curves for various simultant materials characteristic of TRU waste. Stress-volume compaction curves for various combinations of these materials were than derived to represent the combustible, metallic, and sludge waste categories. Prediction of compaction response in this manner is considered essential for the WIPP program because of the difficulties inherent in working with real (radioactive) waste. Next, full-sized 55-gallon drums of simulated combustible, metallic, and sludge waste were axially compacted. These results provided data that can be directly applied to room consolidation and data for comparison with the predictions obtained in Part 1 of the investigation. Compaction curves, which represent the combustible, metallic, and sludge waste categories, were determined, and a curve for the averaged waste inventory of the entire repository was derived. 9 refs., 31 figs., 12 tabs.

This document describes the theory underlying the CDFTBL code and gives details for using the code. The CDFTBL code provides an automated tool for generating a statistical cumulative distribution function that describes a set of field data. The cumulative distribution function is written in the form of a table of probabilities, which can be used in a Monte Carlo computer code. A a specific application, CDFTBL can be used to analyze field data collected for parameters required by the PORMC computer code. Section 2.0 discusses the mathematical basis of the code. Section 3.0 discusses the code structure. Section 4.0 describes the free-format input command language, while Section 5.0 describes in detail the commands to run the program. Section 6.0 provides example program runs, and Section 7.0 provides references. The Appendix provides a program source listing. 11 refs., 2 figs., 19 tabs.

The required approvals and permits to test a nuclear facility are extensive. Numerous regulatory requirements result in the preparation of documentation to support the approval process. The principal regulations for the SP-100 Ground Engineering System (GES) include the National Environmental Policy Act, Clean Air Act, and Atomic Energy Act. The documentation prepared for the SP-100 Nuclear Assembly Test (NAT) included an Environmental Assessment, state permit applications, and Safety Analysis Reports. This paper discusses the regulation documentation requirements and the SP-100 NAT Test Site experience. 12 refs., 2 figs., 2 tabs.

We report on some studies we have made of the time evolution of the corrosion behavior of ion implanted samples of pure iron, medium carbon steel, and 18-8 Cr-Ni stainless steel. Ti, Cr, Ni, Cu, Mo and Yb were implanted at mean ion energies near 100 keV and at doses up to 1 {times} 10{sup 17} cm{sup {minus}2} using a Mevva metal ion implantation facility. A novel feature of this experiment was the simultaneous implantation with several different implanted species. The implanted samples were immersed in sulfuric acid solution at 40{degrees}C and the corrosion monitored as a function of time. The loss in mass was accurately measured using atomic absorption spectroscopy. The functional dependence of the corrosion behavior was established for all samples. The cumulative mass loss Q is given as a function of time t by Q = At{sup N}, where A and N are parameters; thus the corrosion rate V is given by V = ANt{sup N-1}. A is dominated by the initial mass loss and N reflects the long-time corrosion behavior. The values of the parameters A and N were obtained by a least-squares regression for all the samples investigated. We determined that for the samples investigated …

Studies of the catalytic steam gasification of carbon solids continued. In this project a considerable number of important findings have been made. Recently limited experimentation has been carried out on the production of C{sub 2} hydrocarbons from methane in the presence of Ca/K/Ni oxide catalysts and of oxygen, carbon and water. The main finding thus far has been that C{sub 2} yields of 10--13% can be obtained at about 600{degrees}C or 150{degrees} lower temperature than described in the literature for similar yields. Work during this quarter was largely concentrated on oxidative methane coupling. Gasification of a petroleum coke is also discussed. 5 tabs.

The ALS insertion devices must meet very tight requirements in terms of field quality and field strength. Even though the ability to calculate the performance of a hybrid insertion device has improved considerably over the past few years, a model pole was assembled to test the ALS U5.0 undulator geometry and to verify the calculations. The model pole consists of a half period of the periodic structure of the insertion device with mirror plates at the midplane and at the zero-field, half-period planes. A Hall probe was used to measure the vertical component of the field near the midplane of the model as a function of gap and transverse position. Because of the tight field quality requirements the ALS insertion devices are designed to permit several types of correction, including the capability of adding magnetic material or iron at several locations to boost or buck the field. This correction capability was evaluated during our tests. The model is described and details of the test results are discussed, including the fact that the measured peak field is several percent higher than the calculated value, which is based on the measured magnetization of the blocks used in the model. 8 refs., 20 …

Tank 241-A-105 is one of 149 single shell tanks constructed at Hanford to contain and store highly radioactive wastes originating from the processing of spent nuclear reactor fuel. Radiation detection and temperature monitoring devices installed beneath the tank indicate that several episodes of leakage of waste from the tank have occurred. The aim of this study was to evaluate the previous estimates and reanalyze the data to provide a more accurate estimate of leakage from the tank. The principal conclusions of this study are as follows: Earlier investigators estimated leakage prior to August 1968 at 5,000 to 15,000 gallons. Their estimate appears reasonable. Leakage while the tank was being sluiced (8/68--11/70) probably exceeded 5,000 gallons, but probably did not exceed 30,000 gallons. Insufficient data are available to be more precise. Cooling water added to the tank during the sprinkling phase (11/70 -- 12/78) was approximately 610,000 gallons. Sufficient heat was generated in the tank to evaporate most, and perhaps nearly all, of this water. Radionuclides escaping into the soil under the tank cannot be estimated directly because of many uncertainties. Based on a range of leakage from 10,000 to 45,000 gallons, assumed compositions, and decayed to 1/1/91, radioactivity under the …

This report considers the use of a dielectric slab undergoing total internal reflection as an accelerating structure for charged particle beams. We examine the functional dependence of the electromagnetic fields above the surface of the dielectric for polarized incident waves. We present an experimental arrangement for testing the performance of the method, using apparatus under construction for the Grating Acceleration experiment at Brookhaven National Laboratory. 13 refs., 4 figs., 2 tabs.

A family of nuclear driven engines is described in which nuclear energy released by fissioning of uranium or plutonium in a prompt critical assembly is used to heat a working gas. Engine performance is modeled using a code that calculates hydrodynamics, fission energy production, and neutron transport self-consistently. Results are given demonstrating a large negative temperature coefficient that produces self-shutoff of energy production. Reduced fission product inventory and the self-shutoff provide inherent nuclear safety. It is expected that nuclear engine reactor units could be scaled from 100 MW on up. 7 refs., 3 figs.

This report summarizes the Savannah River Site (SRS) groundwater monitoring program conducted in the fourth quarter of 1990. It includes the analytical data, field data, well activity data, and other documentation for this program, provides a record of the program's activities and rationale, and serves as an official document of the analytical results. The groundwater monitoring program includes the following activities: installation, maintenance, and abandonment of monitoring wells, environmental soil borings, development of the sampling and analytical schedule, collection and analyses of groundwater samples, review of analytical and other data, maintenance of the databases containing groundwater monitoring data, quality assurance (QA) evaluations of laboratory performance, and reports of results to waste-site facility custodians and to the Environmental Protection Section (EPS) of EPD.

Now that first-principles calculations of ordering transformations are becoming increasingly accurate, the deficiencies of earlier mean field methods are becoming increasingly apparent. New techniques, based on cluster expansions, are now alleviating many of the earlier problems and are producing very satisfactory results. These ideas will be illustrated for the case of oxygen ordering in the YBa{sub 2}Cu{sub 3}O{sub z} superconducting compound, for which a very simple two-dimensional Ising model has been developed. The model features nearest-neighbor repulsive effective pair interactions and anisotropic (attractive/repulsive) next-nearest-neighbor interactions. CVM (cluster variation method) calculations based on this model have produced a phase diagram in remarkable agreement with experimentally determined phase boundaries. Monte Carlo simulations have confirmed the validity of the model and have provided a rationalization for the influence of oxygen order on the value of {Tc} (superconducting transition temperature) in off-stoichiometric compounds. 46 refs., 4 figs.

A unique benchmark neutron field has been established at the Lawrence Livermore National Laboratory (LLNL) to study deep penetration neutron transport. At LLNL, a tandem accelerator is used to generate a monoenergetic neutron source that permits investigation of deep neutron penetration under conditions that are virtually ideal to model, namely the transport of mono-energetic neutrons through a single material in a simple geometry. General features of the Lawrence Tandem (LATAN) benchmark field are described with emphasis on neutron source characteristics and room return background. The single material chosen for the first benchmark, LATAN-1, is a steel representative of Light Water Reactor (LWR) Pressure Vessels (PV). Also included is a brief description of the Little Boy replica, a critical reactor assembly designed to mimic the radiation doses from the atomic bomb dropped on Hiroshima, and its us in neutron spectrometry. 18 refs.

We present here preliminary results of an extension of our already published search for the top quark. The search is based on a data sample collected during the 1988--1989 run of the Fermilab Tevatron Collider corresponding to an integrated luminosity of 4.4 pb {sup {minus}1}. We find no evidence for top quark production and we establish preliminary limits on the t-tbar production cross section as a function of the top mass (M{sub top}) in p-pbar collisions at {radical}s = 1.8 TeV. Using theoretical expectations for this cross-section, we translate these limits into a preliminary lower limit for M{sub top} of 89 Gev/c{sup 2} at the 95% confidence level. 12 refs., 3 figs. (CL)

Rayleigh-Fano theory has been extended for the purpose of calculating the polarization anomaly of a grating having shallow grooves and finite conductivity. Simple analytic formulas are derived for predicting the position and the appearance of the anomalies. Phenomenological explanations are given to the origin of the anomalies. The validity of our analysis is examined by comparing computed degree of polarization with experimental data obtained in the visible region for Al-, Ag-, and Au-coated blazed gratings.

CP Violation remains one of the unsolved puzzles in particle physics. Measurements of CP violating asymmetries in {beta} meson decay will test the Standard Model of electro-weak interactions and tell whether this phenomenon can be explained simply through the non-zero angles and phase in the CKM matrix. A high luminosity, energy asymmetric e{sup +}e{sup {minus}} storage ring provides the most versatile and best opportunity to measure CP violating effects and to test the consistency of the Standard Model, and should discrepancies occur, information will be available to establish the origin of CP violation outside the model. Such a machine is a very challenging, though technically achievable device, that when complemented with a suitable detector will represent a very exiting laboratory for studies of many aspects of beauty, charm, and {tau}{sup +-} physics in the coming decade. 26 refs., 11 figs., 5 tabs.

The need to provide central support an distribution of many software packages across a variety of UNIX platforms at Fermilab has led to development of a methodology, UPS, for the packaging, maintenance, and distribution of our software. UPS has now been implemented and in use for almost a year on four different UNIX platforms. This paper discusses the goals of the software, implementation of the product, and experiences in its use. 8 refs., 3 figs.

A major section of the Clean Air Act Amendments (CAAA) focuses on reducing air pollution through extending and modifying the provisions for states and localities with US Environmental Protection Agency (EPA)-designated non-attainment areas. Specifically, Title 1 of the CAAA is concerned with non-attainment areas, as defined relative to the National Ambient Air Quality Standards for atmospheric ozone, carbon monoxide, and particulate matter; Title 2 is concerned with mobile sources or air pollution, which produce carbon monoxide, contribute to ozone concentrations, and in the past have been a major source of airborne lead; and Title 4 is concerned with acid deposition, mainly due to sulfur dioxide emissions. This paper has its origin in the question of the potential benefits for minorities--relative to the majority non-Black, non-Hispanic population--of reductions in air pollution that may result from these amendments. It is part of a larger effort to identify and assess the costs and benefits of the CAAA for minorities, relative to the majority population. The focus of this paper centers on comparing Black and Hispanic populations to White, non-Hispanic populations living in EPA-designated non-attainment area counties in the contiguous United States, which excludes Alaska and Hawaii. Subsequent comparisons of majority populations with Native …

The objectives of this study are as follows: Determine the vibration characteristics (frequency, damping, and mode shapes) of the magnet on prototypic supports (the actual mounting system used to mount the magnet on the girder). Measure system response to ambient floor motion. Measure the effect of various modifications to determine if the magnet response can be modified to minimize unwanted response characteristics. Modifications investigated include support schemes, increasing system damping, and increasing mechanical rigidity. Measure system response to coolant flow. Determine vibrational characteristics of a large concrete block placed on a concrete floor, including response to ambient floor motions.

Coupled thermal-structural finite element calculations of a reflux pool-boiler solar receiver were performed to characterize the operating stresses and to address issues affecting the service life of the receiver. Analyses performed using shell elements provided information for receiver material selection and design optimization. Calculations based on linear elastic fracture mechanics principles were performed using continuum elements to assess the vulnerability of a seam-weld to fatigue crack growth. All calculations were performed using ABAQUS, a general purpose finite element code, and elements specifically formulated for coupled thermal-structural analysis. Two materials were evaluated: 316L SS and Haynes 230 alloys. The receiver response was simulated for a combination of structural and thermal loads that represent the startup and operating conditions of the receiver. For both materials, maximum stresses in the receiver developed shortly after startup due to uneven temperature distribution across the receiver surface. The largest effective stress was near yield in the 316L SS receiver and below 39 percent of yield in the Haynes 230 receiver. The calculations demonstrated that stress reductions of over 25 percent could be obtained by reducing the aft dome thickness to one closer to the absorber. The fatigue calculations demonstrated that the stress distribution near the seam-weld …