ANS-8. 23: Criticality accident emergency planning and response (open access)

ANS-8. 23: Criticality accident emergency planning and response

A study group has been formed under the auspices of ANS-8 to examine the need for a standard on nuclear criticality accident emergency planning and response. This standard would be ANS-8.23. ANSI/ANS-8.19-1984, Administrative Practices for Nuclear Criticality Safety, provides some guidance on the subject in Section 10 titled -- Planned Response to Nuclear Criticality Accidents. However, the study group has formed a consensus that Section 10 is inadequate in that technical guidance in addition to administrative guidance is needed. The group believes that a new standard which specifically addresses emergency planning and response to a perceived criticality accident is needed. Plans for underway to request the study group be designated a writing group to create a draft of such a new standard. The proposed standard will divide responsibility between management and technical staff. Generally, management will be charged with providing the necessary elements of emergency planning such as a criticality detection and alarm system, training, safe evacuation routes and assembly areas, a system for timely accountability of personnel, and an effective emergency response organization. The technical staff, on the other hand, will be made responsible for establishing specific items such as safe and clearly posted evacuation evacuation routes and dose …
Date: June 24, 1991
Creator: Pruvost, Norman L.
Object Type: Article
System: The UNT Digital Library
Optical and environmentally protective coatings for potassium dihydrogen phosphate (KDP) harmonic converter crystals (open access)

Optical and environmentally protective coatings for potassium dihydrogen phosphate (KDP) harmonic converter crystals

Potassium dihydrogen phosphate (KDP) crystals have been used as harmonic converters on the Nova laser at LLNL for over six years. All crystals were coated with a single layer, quarterwave AR coating of porous silica with a refractive index of 1.22. This was prepared by a sol-gel process and was applied from a colloidal suspension by spin coating at room temperature. A few crystals were also coated with a methyl silicone coating prior to the application of the AR coating for environmental protection. The initial optical performance of all crystals was very good but there has been some deterioration over the years because of environmental and laser damage degradation. The deterioration in the silicone samples was, however, much less than the others. We are now in the process of replacing all ten KDP arrays with new crystals and will apply the silicone undercoat to all samples. Recently we have been evaluating a new perfluorinated organic polymer coating which has a refractive index of 1.29. This material is soluble in fluorinated solvents and can be applied by dip coating from solution at room temperature. We hope that this can provide environmental protection when applied to KDP and also act as an …
Date: June 24, 1991
Creator: Thomas, I. M.
Object Type: Article
System: The UNT Digital Library
Fundamental studies of catalytic processing of synthetic liquids. Quarterly progress report, April 1, 1991--June 30, 1991 (open access)

Fundamental studies of catalytic processing of synthetic liquids. Quarterly progress report, April 1, 1991--June 30, 1991

This project revolves around understanding the fundamental processes involved in the catalytic removal of harmful oxygenated organics present in coal liquids. We are modelling the complex type of sulfided Mo catalyst proposed for these reactions with simple single crystal surfaces. These display a controlled range and number of reaction sites and can be extensively characterized by surface science techniques. We then investigate the reaction pathways for representative simple oxygenates upon these surfaces. In order to better understand the nature of the active surface in these experiments we have recorded low energy diffraction (LEED) data from the p(2 {times} 2) structure formed by sulfur on Mo(110). We have compiled a large number of intensity-voltage (IV) curves and have started the process of solving the surface structure using the new Tensor LEED method. Our previous work has shown that an important component of furan reactions on sulfided Mo surfaces are dehydrogenation reactions of adsorbed hydrocarbon fragments. The desorption of hydrogen occurs in several steps and is strongly influenced by the amounts of sulfur and carbon on the surface. In order to understand this complex behavior during this period we commenced a series of adsorption/desorption experiments for hydrogen (deuterium) on Mo(110). These experiments …
Date: June 24, 1991
Creator: Watson, P. R.
Object Type: Report
System: The UNT Digital Library