This report summarizes the results of a study conducted to assess the feasibility and cost of modifying an existing circulator test facility (CTF) at General Atomic Company (GA). The CTF originally was built to test the Delmarva Power and Light Co. steam-driven circulator. This circulator, as modified, could provide a source of hot, pressurized helium for high-temperature gas-cooled reactor (HTGR) and gas-cooled fast breeder reactor (GCFR) component testing. To achieve this purpose, a high-temperature impeller would be installed on the existing machine. The projected range of tests which could be conducted for the project is also presented, along with corresponding cost considerations.

The latest available experimental results on the luminosity, the space charge parameters, and the beam blowup as functions of particle energy and beam current are reviewed. The comparison with the phenomenological diffusion theory is done and useful scaling laws are derived. Some implications for anti p p storage rings are discussed.

All activities performed by Alvin Community College and the University of Texas at Austin in association with the development of Geopressured-Geothermal energy are contained in this report. A discussion of the progress of the Test Well is also contained herein. Public seminars and workshops were presented to the local community. A summer institute in energy was also presented to local public school teachers. A compaign to publicize the development of the new energy resource was also waged. An overall evaluation of the project is also attached.

This report describes the conceptual design of an 842-MW(t) process heat very high temperature reactor (VHTR) plant having a core outlet temperature of 850/sup 0/C (1562/sup 0/F). The reactor is a variation of the high-temperature gas-cooled reactor (HTGR) power plant concept. The report includes a description of the nuclear heat source (NHS) and of the balance of reactor plant (BORP) requirements. The design of the associated chemical process plant is not covered in this report. The reactor design is similar to a previously reported VHTR design having a 950/sup 0/C (1742/sup 0/F) core outlet temperature.

Extensive modifications were made to the multi-source deposition apparatus. These include the installation of a larger vacuum chamber on the existing system. The new chamber provides improved inter-source shielding, an improved substrate mounting and heating system, and a vacuum interlock for introducing substrates. CdS resistivity control by both In doping and off-stoichiometric deposition has been investigated. Indium doping has been achieved both by diffusion from a pre-deposited In layer and by using In doped sputtering targets. Resistivities in the range 0.1 to 5 ..cap omega..-cm have been obtained for target doping levels of from 0.1 to 1 at. percent of In. These resistivities were found to be critically dependent on the H/sub 2/S injection rate, apparently because of compensation by Cd vacancies. Off-stoichiometry CdS coatings with solar-illuminated resistivities of about 10/sup 2/ ..cap omega..-cm have been deposited, using a cyclic reactive sputtering process were the H/sub 2/S injection is periodically switched on and off. The Cu/sub x/S deposition process was found to be sensitive to the period of cathode operation prior to coating deposition, probably because of the conditioning of cathode and shield surfaces. All-sputter-deposited Cd(Zn)S/Cu/sub 2/S cells, with Cd(Zn)S layers deposited using a Cd-0.10 Zn target doped with 2 …

The linear collider system is described in detail, including the transport system, the collider lattice, final focusing system, positron production, beam damping and compression, high current electron source, instrumentation and control, and the beam luminosity. The experimental facilities and the experimental uses are discussed along with the construction schedule and estimated costs. Appendices include a discussion of space charge effects in the linear accelerator, emittance growth in the collider, the final focus system, beam-beam instabilities and pinch effects, and detector backgrounds. (GHT)

The gamma-ray energy responses of encapsulated /sup 7/LiF and CaF/sub 2/:Mn thermoluminescent dosimeters were measured and compred to calculated values. This study was performed in order to improve the accuracy of gamma-ray heating measurements made in polyenergetic gamma-ray fields such as Argonne National Laboratory's Zero Power Reactors. Equations used in the development of the TERC/III computer code and code input parameters are specified. A section on TLD precision is also included. Comparisons between calculations and experiments are reported for a gamma-ray energy range of 0.122 to 1.33 MeV and encasement media with a range of atomic numbers from 13 to 82.

Thin films (approx. 1 ..mu..m thick) and large grains (approx. 40 x 40 ..mu..m) of InP were epitaxially deposited on low-cost recrystallized CdS (RXCdS) substrates at 280/sup 0/C by planar reactive deposition. At 380/sup 0/C, a 0.4- to 1.0-..mu..m-thick In-Cd-S transition layer between the InP and the RXCdS degrades the quality of the InP epitaxy. However, p-type InP films were prepared at this temperature by Be-doping and capping the entire RXCdS substrate with InP. Large grains of CdTe (approx. 40 ..mu..m) were also deposited on RXCdS substrates at 460/sup 0/C by physical vapor deposition. The grain size of the RXCdS is typically 40 ..mu..m. However, during this period we prepared RXCdS with grains having dimensions up to 300 ..mu..m.

Research progress in the development of Ni/Fe batteries (electrodes in particular) for the period is described. The negative plate demonstrated a reliable lifetime of almost 1000 cycles; 20 mm positive plates were proved feasible; prototype cells yielded output at about 50 Wh/kg and 100 Wh/liter; program goals of 20% greater than these figures appear feasible. 27 figures, 20 tables. (RWR)

Solid radioactive wastes are disposed of by burial in pits excavated in rhyolite tuff at the Los Alamos Scientific Laboratory (LASL). Contaminants in the waste include fission products, uranium, and transuranic elements. In 1976, horizontal core holes were drilled beneath a waste disposal pit that was used from 1963 to 1966. Samples of the core were analyzed for gross alpha, gross beta, total uranium, /sup 90/Sr, /sup 137/Cs, /sup 238/Pu, /sup 239/ /sup 240/Pu, and /sup 241/Am. The measured gross alpha, gross beta, and uranium concentrations were above minimum detection limits; concentrations of the remaining radionuclides, all of which are man-made isotopes, were below the minimum detection limits. Statistical comparisons were made of the gross alpha, gross beta, and uranium data to identify any significant variations from natural concentrations in the tuff. The comparisons demonstrated that none of the radioactivity detected in the samples can be attributed to migration from the disposal pit.

Environmental problems related to the use and disposal of fluids can accompany the operation of geothermal power plants using hot water resources (temperature > 150/sup 0/C). More than 100 kg of fluids must be extracted, processed, and disposed for each kW.h of electricity generated from a facility relying on a geothermal reservoir with fluids of 150/sup 0/C. The low thermal efficiencies of geothermal power plants result in large requirements for cooling water - over 7.4 x 10/sup 4/ m/sup 3//MW.y compared with 1.7 x 10/sup 4/ m/sup 3//MW.y for coal-fired plants. Geothermal fluids can contain as much as 250,000 mg/1 total dissolved solids. Toxic substances like boron and NH/sub 3/ are often present in fluids. This paper focuses on impacts associated with accidental releases of geothermal fluids as well as the disposal of liquid and solid wastes. The consequences of consuming alternative sources of cooling water are also addressed. Inadvertent discharges of fluids are of concern because they could contaminate soils and surface waters, adversely affecting crops and aquatic organisms. The pretreatment of fluids before subsurface injection could lead to solid waste problems - especially when toxic substances are produced. The consumption of alternative cooling waters can pose problems involving …

This first edition of the Atlas provides, in reference form, a central source of information to consumers on key contacts concerned with energy in the US. Energy consumers need information appropriate to local climates and characteristics - best provided by state and local governments. The Department of Energy recognizes the authority of state and local governments to manage energy programs on their own. Therefore, emphasis has been given to government organizations on both the national and state level that influence, formulate, or administer policies affecting energy production, distribution, and use, or that provide information of interest to consumers and non-specialists. In addition, hundreds of non-government energy-related membership organizations, industry trade associations, and energy publications are included.

A neutral beam source will be incorporated in the Tokamak Fusion Test Reactor (TFTR) charge exchange diagnostic to provide a time modulated, spatially localized enhancement of the charge exchange efflux. Two autonomous Charge Exchange Neutral Analyzer (CENA) systems are being designed for the TFTR. One system measures the plasma ion temperature along twelve vertical line-of-sight chords spaced approximately equidistantly across the torus minor diameter. The other system is dedicated primarily to measurement of ion phenomena associated with neutral beam injection heating and has a fan-like field of view along eight sight-lines in the equitorial plane. The neutral beam is steerable in order to access the viewing field of both CENA systems, though in general not simultaneously. The performance of the diagnostic neutral beam is evaluated to determine the optimal beam specifications for active charge exchange measurements. Using the optimal beam design parameters, the efficacy of the neutral doping is examined for both CENA systems over the envisioned range of the TFTR plasma density and temperature.

Lack of sufficient quantities of clean surface or near-surface water at Raft River for cooling purposes dictates that cooled geothermal fluid, effluent from the Raft River 5 MW(e) Pilot Power Plant, must also be used as condenser coolant. Prior testing revealed that a water-treatment system would be required to reduce silica and calcium concentrations of the cooling fluid. The water-treatment system specified was to use dolomitic lime for both pH adjustment and source of magnesium. The dolomitic lime treatment was investigated and found to be inadequate. Subsequent testing was done to find chemical systems that would adequately reduce silica concentrations. Three magnesium and two iron compounds were found which reduced silica to acceptable concentration levels. They are magnesium bicarbonate, magnesium chloride, magnesium sulfate, iron sulfate, and iron chloride. Magnesium oxide, using a two-stage countercurrent process, will also reduce silica to adequate levels.

This review paper begins by discussing the limits faced in the attempts to get nuclei to hold very high angular momentum. The method presently used to produce nuclei with the maximum angular momentum is described. Then the physics of high-spin states is taken up; some properties of a purely collective, classical rotor are described, and the effects of coupling single-particle motion to this are considered. Next, backbending, its causes, and a new spectroscopy of bands and backbends at high spin values are discussed. Noncollective states occur when the nuclear angular momentum is carried by a few high-j particles and is aligned along a symmetry axis. There results an irregular yrast line, along which there are no collective transitions. Noncollective behavior in the lead region, the hafnium region, and the N = 82 region is examined. Then the discussion moves on to collective behavior and recent studies on continuum spectra. Evidence for rotation is given, and effective moments of inertia for this rotation are evaluated. Finally, current ..gamma..-ray energy correlation studies are described. 68 references, 36 figures. (RWR)

It is noted that beam probe systems can provide accurate, reliable measurments of plasma space potential and nf(T/sub e/). Over some temperature range, at least, it should be possible to separate n and T/sub e/ by measuring the multiple ionization reaction products. It is also an ideal diagnostic for studying fluctuations since it provides a simultaneous measurement of phi and nf(T/sub e/) from the same point in the plasma and the measurements are continuous in time. Measurements can be made quasi-continuously in space by rapidly sweeping the beam. By using more than one detector it should be possible to make measurements simultaneously at two different observation points in the plasma.

A planning study was made for DOE on alternate fuels for non-highway transportation (aircraft, rail, marine, and pipeline). The study provides DOE with a recommendation of what alternate fuels may be of interest to non-highway transportation users from now through 2025 and recommends R and D needed to allow non-petroleum derived fuels to be used in non-highway transportation. Volume III contains all of the references for the data used in the preliminary screening and is presented in 4 subvolumes. Volume IIIA covers the background information on the various prime movers used in the non-highway transportation area, the physical property data, the fuel-prime mover interaction and a review of some alternate energy forms. Volume IIIB covers the economics of producing, tranporting, and distributing the various fuels. Volume IIIC is concerned with the environment issues in production and use of the fuels, the energy efficiency in use and production, the fuel logistics considerations, and the overall ratings and selection of the fuels and prime movers for the detailed evaluation. Volume IIID covers the demand-related issues.

Information is presented concerning new trends in licensing; seismic considerations and system structural behavior; TMI-2 risk assessment and thermal hydraulics; statistical assessment of potential accidents and verification of computational methods; issues with respect to improved safety; human factors in nuclear power plant operation; diagnostics and activities in support of recovery; LOCA transient analysis; unresolved safety issues and other safety considerations; and fission product transport.

The SERAPH (Solar Energy Research and Applications in Process Heat) facility addresses technical issues concerning solar thermal energy implementation in industry. Work will include computer predictive modeling (refinement and validation), system control and evaluation, and the accumulation of operation and maintenance experience. Procedures will be consistent (to the extent possible) with those of industry. SERAPH has four major components: the solar energy delivery system (SEDS); control and data acquisition (including sequencing and emergency supervision); energy distribution system (EDS); and areas allocated for storage development and load devices.

Results are presented of work performed on the Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Included are the activities associated with the status of the simulated reactor helium supply system, testing equipment and gas chemistry analysis instrumentation and equipment. The progress in the screening test program is described, including screening creep results and metallographic analysis for materials thermally exposed or tested at 750, 850, and 950/sup 0/C.

This report describes work performed from October 1, 1978 to September 30, 1979. The approach for development of both the Improved State-of-the-Art (ISOA) and Advanced lead-acid batteries is three pronged. This approach concentrates on simultaneous optimization of battery design, materials, and manufacturing processing. The 1979 fiscal year saw the achievement of significant progress in the program. Some of the major accomplishments of the year are outlined. 33 figures, 13 tables. (RWR)

This is the final volume of a history of the research work of Seaborg and associates in the University of Chicago Metallurgical Laboratory, Chemistry Section C-1. The work was concerned with the development of chemical procedures for the extraction of plutonium, for the purification of plutonium and, in the later phases, for research on the isotopes of other heavy elements including other transuranium elements. The style of the history is that of a diary with footnotes giving additional information.

Two ultrafast-scan (<8 ms/field) television (TV) camera prototypes have been developed for closed-circuit data-acquisition applications. The line and field rates are quasi-continuously adjustable. The number of lines, the integration duty cycle, and the scan direction are among the other adjustable parameters. Typical resolution at the fastest scan rate is >500 TV lines per picture height with a corresponding dynamic range (to light input) of more than 100. The cameras use the unique properties of FPS vidicons and specially designed electronics to achieve their performance levels and versatility. The advantages and disadvantages of FPS vidicons and of antimony trisulfide and silicon target materials in such applications are discussed in detail. All of the electronics circuits are discussed. The sweep generator designs are treated at length because they are the key to the cameras' versatility. Emphasis is placed on remotely controllable analog and digital sweep generators. The latter is a complete CAMAC-compatible subsystem containing a 16-function master arithmetic logic unit. Pulsed and cw methods of obtaining transfer characteristics are described and compared. The effects of generation rates, tube types, and target types on the resolution, determined from contrast-transfer-function curves, are discussed. Several applications are described, including neutron TV pinhole, TREAT, and barium-release …

The findings of a literature review on the environmental concerns and associated control methods of geothermal energy utilization are presented. The document introduces the environmental problems associated with geothermal energy utilization; assesses the current status of control methods; references appropriate environmental documents; and identifies areas where additional environmental research is needed. The review attempts to consolidate current understanding of the environmental impact of geothermal energy development. Approximately 180 reports written by authors in industry, government and academia have been reviewed in the areas of air emissions, surface and subsurface liquid discharges, solid wastes, noise, subsidence, and induced seismicity.