The development of a high-frequency electronic (Stevens) ballast for fluorescent lamps is described. It is claimed that use of this ballast could reduce use energy consumption by 1.2 to 2.5 percent. The Stevens ballast has a basic efficiency of 29 percent when used with conventional lamps. With the more efficient lamps, the efficiency increases drastically. The conventional ballast and lamp has an efficiacy of approximately 60 to 63 lumens per watt (LPW). With the Stevens ballast the efficiacy raises to between 75 and 80 lumens per watt. When the Stevens ballast is utilized with the newer high efficiency lamps the efficiacy increases to 90 to 95 lumens per watt or a full 51 percent improvement over conventional coil and core ballasts and 25 percent over the best high efficiency premium coil and core ballasts. In addition to its energy savings capabilities, this high frequency fluorescent lamp ballast has the advantages that it is a true retrofit device that is directly interchangeable with the conventional coil core ballast, and it is dimmable over a wide and continuous range. (LCLC)

Performance models for a two-phase turbine were developed to verify the understanding of the loss mechanisms and to extrapolate from the single-nozzle test condition to a full-admission turbine. The numerical models for predicting the performance of the nozzle and the combined nozzle and rotor are described. Results from two-phase, static cascade tests and disk-friction and windage experiments are used to calibrate the performance model(s). Model predictions are compared with single-nozzle prototype-turbine test results, and extrapolations are made to a full-admission design. The modeling also provides predictions of performance for turbines with various blade geometries, inlet conditions, and droplet sizes. Thus the modeling provides insight into design improvements.

A modified wire drawing die for spatial filtering techniques is described. It was designed for use in high power laser systems. The diamond aperture is capable of enduring high intensity laser frequency without damaging the laser beam profile. The diamond is mounted at the beam focus in a vacuum of 1 x 10/sup -5/ Torr. The vacuum prevents plasma forming at the diamond aperture, thus enabling the beam to pass through without damaging the holder or aperture. The spatial filters are fitted with a manipulator that has three electronic stepping motors, can position the aperture in three orthogonal directions, and is capable of 3.2 ..mu..m resolution. Shiva laser system is using 105 diamond apertures for shaping the High Energy Laser Beam.

Methods of integrating data from the Near-Surface Test Facility into the overall Waste Isolation Program are examined. Discussions are presented dealing primarily with the application of numerical models to the design of a waste repository. The various types of models currently available are discussed with reference to design in basalt and the breakdown of the problem of repository design is summarized. It is shown that the most efficient method for analyzing repository design is to break the problem down into several problems which are based on physical scale. These include the area directly surrounding a single waste canister (the very near field), the area including many canisters and canister emplacement rooms (the near field), and the area including the entire repository and the rock mass to the free surface (the far field). The methods by which numerical models are used for design are discussed. Flow charts are used to show the basic input data required, the calculational processes used, and the preliminary criteria for judgment of suitable repository performance. It is shown that the ultimate design of the allowable gross thermal loading density, and, thus, the layout of the underground workings is highly dependent upon the rock mass properties supplied …

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification; Whether the commissioners court can control the operations of the county jail.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification; Whether tax increment bonds can be issued without a referendum.

Results of isobaric expansion measurements for platinum are presented, including simultaneous values for enthalpy, specific volume, temperature and electrical resistivity in tabular form as well as numerical fits up to 7500 K. The specific heat for the liquid is C/sub p/ = 5.85 +- 0.30 R and is essentially constant up to 7500 K. The bulk thermal expansion coefficient increases from approx. 7.5 x 10/sup -5/K/sup -1/ at melt to approx. 1.03 x 10/sup -4/K/sup -1/ at 7500 K. The heat of fusion observed is ..delta..h = 0.14 +- 0.03 MJ/kg and the melting point slope with pressure is estimated to be dT/sub m//dp =31 +- 10 K/GPa. The estimated critical parameters are T/sub c/ = 9285 K, P/sub c/ = 0.9492 GPa, v/sub c/ = 2.120 x 10/sup -4/ m/sup 3//kg, and z/sub c/ = 0.5085. Preliminary results of a new sound velocity technique are discussed for lead. This technique will allow determination of specific heat c/sub v/, isothermal compressibility K/sub T/ and the constant temperature volume derivatives of entropy and internal energy, as well as the Gruneisen parameter ..gamma../sub G/.