Discussion is presented to substantiate, clarify and reinterpret some of the results of the above authors for the existence and origin of tempered martensite embrittlement (TME) in relation to retained austenite, with reference to the experimental steels worked at LBL for the past several years.

At the Federal level, a vast array of bureaucratic and legislative institutions are presently immersed in various explorations of energy policy and its national ramifications. Almost each of the 50 states has Energy offices. One element of the institutional/political equation, however, often is missed in studies of energy policy: the state legislature. This institution may well be vitally important to formulation of broad policies, and certainly is critical to successful implementation of certain aspects of those policies--especially when new enabling legislation, new tax incentives, or new regulatory powers are required. The study covers three main aspects of energy-policy formulation and action by state legislatures: legislative structure; enactment of energy-facility-siting laws; and passage (or defeat) of significant energy legislation of a more general nature. Emphasis is placed on energy-facility-siting statutes and approaches for two reasons. First, energy facilities have a great impact on land use, environmental quality, and economic growth. Second, siting of these facilities raises inherent conflicts in the attempt to achieve balance between potentially contradictory objectives. The states of New Jersey and Maryland were examined in considerable depth as examples in this study. (MCW)

The conference included 10 papers, one of which appeared previously under conference number Conf: 770675-1. Separate abstracts were prepared for the remaining nine papers. (JFP)

A general review, description, and history of geothermal development at the Geysers is presented. Particular emphasis is placed on environmental impacts of development of the area. The discussion is presented under the following chapter titles: introduction; energy, enthalpy and the First Law; vapor-producing geothermal reservoirs--review and models; geothermal; entropy and the Second Law; power plants--basics; H/sub 2/S emissions; hydrogen sulfide--possible health effects and odor; other emissions; power plant hydrogen sulfide abatement; hot water based geothermal development; phytotoxicity of geothermal emissions; appendices; and bibliography. (JGB)

The degradation of cellulosic biomass continues to focus on the anaerobic thermophile Clostridium thermocellum. When grown on crystalline cellulose (MN300) in batch culture, there is an initial rapid accumulation of reducing sugars but the sugars are rapidly metabolized in later times during the fermentation. When grown on Solka floc with periodic addition of the substrate, there is a continual accumulation of reducing sugars (xylose, glucose, and cellobiose) as well as ethanol and acetic acid during the entire course of the fermentation. In the presence of surfactant in the growth medium, there is an increased appearance of extracellular cellulases. A chemically defined medium is being developed for growth Cl. thermocellum in order to study the enzyme regulations. Lastly, a trinitrophenyl-carboxylmethyl cellulose substrate for determining cellulose activity appears to be a promising and rapid assay. Progress in the genetic manipulations has been cautious but promising. Preliminary evidence leads to optimistic projection on the presence of plasmids and bacteriophage in Cl. thermocellum. The production of chemical feedstocks continues to focus on acrylic acid, acetone/butanol and acetic acid. Studies with cell free extracts of Clostridium propionicum have shown the production and accumulation of acrylic acid from lactic acid. The use of electron acceptor in …

Muons that result from the collisions of protons in the ISABELLE beams with other nucleons introduce important background or signal for experiments. Their ability to pass through the conductors and steel of ISABELLE magnets results in complicated trajectories. Some oscillate about quasistable orbits and are called ''trapped.'' A number of typical trajectories were plotted, and flux estimates were made with a Monte Carlo program, HALO. Trapping tends to reduce shielding requirements somewhat, but the effect does not appear to be a very large one from these initial investigations. More aspects need to be studied, and HALO appears to be a useful tool for doing so.

The temperature distribution within the rod bundle of a nuclear reactor is of major importance in nuclear reactor design. However temperature information presupposes knowledge of the hydrodynamic behavior of the coolant which is the most difficult part of the problem due to complexity of the turbulence phenomena. In the present work a 2-equation turbulence model--a strong candidate for analyzing actual three dimensional turbulent flows--has been used to predict fully developed flow of infinite bare rod bundle of various aspect ratios (P/D). The model has been modified to take into account anisotropic effects of eddy viscosity. Secondary flow calculations have been also performed although the model seems to be too rough to predict the secondary flow correctly. Heat transfer calculations have been performed to confirm the importance of anisotropic viscosity in temperature predictions. All numerical calculations for flow and heat have been performed by two computer codes based on the TEACH code. Experimental measurements of the distribution of axial velocity, turbulent axial velocity, turbulent kinetic energy and radial Reynolds stresses were performed in the developing and fully developed regions. A 2-channel Laser Doppler Anemometer working on the Reference mode with forward scattering was used to perform the measurements in a simulated …

Separate abstracts were prepared on four sections of this report that describes research programs at BNWL related to pollution control technology for the development of energy sources.

This report is a supplement to the original report, published in 1968, as revised. The Benchmark Problem Book is intended to serve as a source book of solutions to mathematically well-defined problems for which either analytical or very accurate approximate solutions are known. This supplement contains problems in eight new areas: two-dimensional (R-z) reactor model; multidimensional (Hex-z) HTGR model; PWR thermal hydraulics--flow between two channels with different heat fluxes; multidimensional (x-y-z) LWR model; neutron transport in a cylindrical ''black'' rod; neutron transport in a BWR rod bundle; multidimensional (x-y-z) BWR model; and neutronic depletion benchmark problems. This supplement contains only the additional pages and those requiring modification. (RWR)

Studies were conducted to experimentally demonstrate the durability catalysts and catalyst supports in a combustion environment. A test of 1000 hours duration was completed with two catalysts, using No. 2 diesel fuel and operating at catalytically supported thermal combustion conditions. This atmospheric pressure durability test was conducted, using an air preheat temperature of about 640/sup 0/K and a reference velocity of about 14 meters/second. The adiabatic flame temperature of the fuel/air mixture was 1527/sup 0/K. The performance of the catalysts was determined by monitoring emissions throughout the test, and by examining the physical condition of the catalyst core at the conclusion of the test. Tests were performed periodically to determine changes in catalytic activity of the catalyst core. Detailed parametric studies were also run at the beginning and end of the durability test, using propane as a fuel. The test catalysts proved to be capable of low emissions operation after 1000 hours diesel aging, with no apparent physical degradation of the catalyst support. Typical emissions during the 1000 hours of testing were: unburned hydrocarbons (C/sub 3/ vppM), 4; carbon monoxide (vppM), 50; nitrogen oxides (vppM), 4.

The objectives of this project are to optimize a modular process to convert cellulosic wastes to butanol and other oil-sparing chemicals. Research to date has focused on developing analytical methods, establishing a good data base and improving cellulase yields. Reliable assay methods for the Thermoactinomyces cellulase complex have been developed, measuring glucose and reducing sugar from filter paper and Avicel for total cellulase activity, viscosity change with carboxymethyl cellulose for the endoglucanase activity, and fluorescence change with methylumbelliferyl-..beta..-D-glucopyranoside for ..beta..-glucosidase activity. Isoelectric focusing within the range pH 3.5 to 6.0 has proved to be a quick and useful means of determining effective cellulase complex composition. About 10 different proteins are present in the fermentation broth. Detailed procedures for uv and near uv plus 8-methoxy-psoralen mutagenesis have been developed, and four mutants having 50% greater activity than the parent YX strain have been isolated. Cellulase production by Thermoactinomyces is growth related and is maximum when growth stops at 12 to 16 hours with 1 to 5% Avicel at pH 7.0 to 7.2 and 55/sup 0/C. A multistage fermenter has been assembled for optimization of butanol versus acetone production by Cl. acetobutylicum. A preliminary economic assessment, currently indicating butanol at just above …

Separate abstracts were prepared for each of the 8 included sections. (MOW)

This addendum outlines the planned development program for equipment, identified and conceptually shown in the Waste Isolation Pilot Plant (WIPP) Conceptual Design Report (CDR), that is required for storage emplacement and retrieval of all wastes accepted at the WIPP.

The design and operation of a pilot steam-flooding process in the Williams Holding are described. Progress is reported in sections on design criteria, location selection, computer simulation, distillation effects, operational considerations, well design, facilities design, and environmental considerations. (JRD)

The construction and operation of large-scale energy or resource development projects are accompanied by environmental, social, and economic changes or impacts. Impact assessment is the key tool used to determine which impact areas will most severely affect the community and will thus need to be managed. Impact management, only recently recognized as part of the assessment process, includes public and private actions to ameliorate impacts. The use of available impact management strategies can affect the outcome or change in the social and economic environment in a community. Therefore, an inventory of available strategies and the capabilities of local governments to use such strategies should be an integral part of any social and economic impact assessment. This provides a link between impact assessment and management. This report provides an introductory analysis to some of the more complex issues raised by social and economic impact management, with experiences cited from Western coal-development communities. Following an introduction, the paper is divided into sections corresponding to the major social and economic impacts experienced by rural communities surrounding an energy development. Each section contains a brief introductory description of the types of problems typically associated with the impact sector, and a discussion of management strategies …

The results of tests performed to evaluate the performance of selected high-speed flywheel bearings and shaft seals are reported, and work performed on the development of a high-speed composite flywheel rotor is described. The overall program objective is to develop a composite flywheel system for primary energy storage in a flywheel powered vehicle. These initial tests were intended to evaluate the performance of full-size composite rotor elements, high-speed bearings and shaft seals for that system under conditions simulating as closely as possible those anticipated in a finished vehicle. Performance of the angular contact ball bearings is reported to be satisfactory at all speeds; a simplified lubrication system is recommended for second generation hardware. Performance of the ferrofluidic shaft seals is reported to be marginal, as they failed to hold a hard vacuum at the maximum design speed. Several concepts for improved seals are offered for second generation hardware. The test objectives for the high-speed composite flywheel rotor were not achieved due to dynamic instability problems with the test hardware. Recommendations are offered for the design of second generation hardware, and a scope of activities is proposed for the second phase of this program.

Progress is reported in the following studies on analysis and evaluation of potential raw materials: preliminary pretreatment studies using wheat straw; extraction of wheat straw with alcohol and water at elevated temperatures; extraction of ground wood with alcohol and water at elevated temperatures; and, delignification of newsprint with ethylene glycol. Other research in progress includes studies on: utilization of hemicellulose sugars; process design and economics of hydrolysis processes and ethanol fermentation; and, pilot plant process development and design, including cell-recycle systems for cellulase production, continuous hydrolysis, countercurrent hydrolysis, and ethanol fermentation studies. (JGB)

A series of experiments was performed in which gamma-ray spectra were measured, using a Ge(Li) detector, for incident 7 to 26-MeV protons on the even-even vibrational nuclei /sup 56/Fe, /sup 62/Ni, /sup 64/Zn, /sup 108/Pd, /sup 110/Cd, /sup 114/Cd, /sup 116/Cd, /sup 116/Sn, /sup 120/Sn, and /sup 206/Pb, and for incident 14-MeV neutrons on natural Fe, Ni, Zn, Cd, Sn, and Pb. These measurements yielded gamma-ray cross sections from which it was inferred that almost all of the gamma cascades from (p,p') and (n,n') reactions passed down through the first 2/sup +/ levels. Consequently, the strength of the 2/sup +/ ..-->.. 0/sup +/ gamma transitions were found to be an indirect measure of the (p,p') or (n,n') cross sections. Several types of nuclear model calculations were performed and compared with experimental results. These calculations included coupled-channel calculations to reproduce the direct, collective excitation of the low-lying levels, and statistical plus pre-equilibrium model calculations to reproduce the (p,p') and the (n,n') cross sections for comparison with the 2/sup +/ ..-->.. 0/sup +/ gamma measurements. The agreement between calculation and experiment was generally good except at high energies, where pre-equilibrium processes dominate (i.e. around 26-MeV). Here discrepancies between calculations from the two …

A feasibility study has been completed to decontaminate the primary system of the Dresden-1 Nuclear Power Unit operated by Commonwealth Edison Company of Illinois. Available data initially were searched to determine the state of the art. Solvents based on organic acids and chelates gave unsatisfactory deontamination factors or unacceptable corrosion rates when evaluated for cleaning of specimens from the Dresden-1 primary system, under static and dynamic conditions. A new proprietary cleaning solution, Dow Solvent NS-1, was successfully applied in these laboratory studies.

The mechanical structure of the LLL/GA Mirror Hybrid Reactor vessel is briefly discussed. Functional requirements and over-all design considerations leading to selection of a post-tensioned concrete reactor vessel and a modular blanket approach are indicated. Module design life of four years, module replacement, capability and remote fueling are provided by the chosen structural design. (RME)

Appendices are presented which contain information concerning the decontamination of Dresden-1; consultant's opinions; proceedings of the American Power Conference, Volume 37, 1975; health physics reports; toxicological properties and industrial handling hazards of Dow solvent NS-1; and expected radiation dose rates in the new Dresden station radioactive waste processing building.

A large scale laboratory system was constructed to evaluate the methane yields from various organic materials. The initial substrate for these studies was beef feed lot manure. Methane yields ranged from 0.11 to 0.259 m/sup 3/ per kg volatile solids fed with a fermentation temperature of 58/sup 0/C. The gas yield for a given manure was a function of retention time. However, fresh manure produced substantially more gas than manure that had been on the lots for several months. Retention times of 3.7 days and loadings of 8.76 kg per m/sup 3/ per day resulted in stable operation. The results of a separate study of the effect of reactor type on methane production showed that if a balanced population of organisms can be maintained in the initial stage, a multi-stage fermentation is more efficient than a complete-mix system. However, when the system is stressed, failure of the multi-stage system is more rapid. If the objective is to maximize the conversion of solids to methane, a staged system will produce more methane per unit volume of reactor. If the objective is to maximize methane production per unit volume of reactor, a single stage complete-mix reactor operating at near the critical retention …

The energy of the observed maximum of the 250 keV resonance in the total neutron cross section of /sup 6/Li is measured to be 244.5 +- 1 keV relative to the velocity of light. The observed peak magnitude is 11.20 +- 0.20 b.

For microstructures of the ''cellular'' type (isotropic growth from a distribution of nuclei which form simultaneously), it is possible to construct an efficient code which will completely analyze the microstructure in three dimensions. Such a computer code for creating and storing the connected graph was constructed. (DLC)