Report issued by the Brookhaven National Laboratory discussing high-pressured gamma loops. As stated in the introduction, "this latest endeavor involved three test cells, a gamma irradiation pool and supporting equipment, as well as an enlarged high-pressure gamma loop facility" (p. 1). This report includes tables, and illustrations.

Report issued by the Brookhaven National Laboratory discussing the shipboard cobalt-60 irradiator. As stated in the introduction, "this report discusses the conceptual design of a cobalt-60 shipboard irradiator for use to improve the keeping quality of fish landed aboard commercial fishing trawlers operating out of ports along the eastern seaboard of the commercial United States" (p. 1). This report includes tables, and illustrations.

The following quarterly report covers the period during February 16 to May 15, 1963. This report is divided into sections covering the separate activities during this period, studying the thermal behavior of the F-center in RbCl.

Abstract: A large amount of water leaks through the floor of Lake McMillan to underground solution channels or openings in the gypsiferous Seven Rivers Formation.

From introduction: The Carolinas Virginia Tube Reactor is to be designed as a prototype for a large-scale plant of about 200 megawatts electrical or larger, wherein operation with natural uranium feed material may be feasible but such feed material can only be considered if it is the more economical.

This report is an airphoto analysis of soil types including maps and illustrations.

From introduction: It is the purpose of this study to present field measurements of dispersion in a river and a canal, whose characteristics are unlike streams in which similar work has been done. The Colorado River and the Pierce Canal were selected for testing.

The objectives of the SNAP 7B program were to design, manufacture, test and deliver a thirty-watt electric generating system for a U. S. Coast Guard Automatic Light Station. This report describes the sixty-watt, strontium-90 thermoelectric generator, the converter, the batteries, and the installation of the generator into the container. The electrical tests of the generator and of the system, the shock and vibration tests, and the tests at the environmental temperature extremes are discussed.

Abstract: A series of clean critical experiments was performed in the SGR critical facility utilizing 2 wt % enriched, uranium metal, hollow cylinder, fuel elements, in AGOT graphite moderator.

Tests were run at the General Electric Company, Atomic Power Equipment Department, to determine the burnout conditions for a non-uniformly heated rod in an annular geometry.

The design of prestressed concrete pressure vessels is discussed and some approximate design formulae are developed. The design and performance of vessels reported in the literature are reviewed and an approximate comparison is made of steel and concrete pressure vessels for a particular case. Concrete vessels are attractive for moderate temperatures and pressures because of the large size of vessel which can be built and the non-explosive mode of failure. However it is unlikely that large cost savings will be made by using prestressed concrete instead of steel for the pressure vessels.

The diffusion length of thermal neutrons in beryllium oxide of effective density 2.86 g cm-3 has been measured as 29.9 +- 0.8 cm. Using published experimental values for the diffusion constant of beryllium oxide, a value of [sigma] a = 9.0 +- 0.5 mb is deduced for the effective 2200m/s microscopic absorption cross-section.

Data relating to the binary and ternary systems involving beryllium oxide are presented . The survey deals with all available literature up to December 1962.

Abstract: The exhibit shows that colloidal aggregates (10 to 20 mu) of human serum albumin I131 may be used safely by intravenous injection to perform photoscans of the heart, liver, spleen, stomach, and salivary glands in man. Large particle size suspensions (10 to 50 mu) of the same material are being investigated experimentally in animals for scanning the lungs after intravenous injection and the brain following injection into an internal carotid artery. The advantages of this test material are the relatively low radiation exposure to the target organs and the number of organs that may be examined. Radiation exposure is low because of the rapid turnover in the target organs and removal from the body, mainly by urinary excretion, within 72 hours. The mechanism of liver-spleen localization with this organic colloid is the same as for inorganic colloidal radiogold198, namely, rapid removal from the blood by the phagocytic cells of the liver and spleen. However, in contrast to the inorganic colloid, which remains in the phagocytic cells permanently, albumin is digested by proteolytic enzymes and the I131 abel is set free to re-enter the general circulation. With the thyroid blocked, the I131 is excreted mainly in the urine as free …

Fecal specimens from apparently healthy dogs were inoculated into MK, DK, HeLa, and CP cells. Twenty-six cytopathic agents were isolated in MK, 11 in HeLa, and 4 in CP, but none in DK cells. Neutralization tests indicated that all but one of the viruses were either strains of ECHO type 6 or were closely related to it. Twenty-one of 29 dogs were carrying the virus.

From Introduction: "The present study was initiated to provide data regarding the particulate state of fission products released from uranium heated in air. It was expected that the information gained in this work would be valuable in planning experiments in which animals would be exposed to aerosols of mixed fission products and in determining the feasibility of using the effluent from a fuel specimen melt-down or oxidation in such exposures."

A potential performance limitation of superheat fuel is the susceptibility of the fuel cladding to low cycle fatigue failure. Two simplified analytical methods are presented to estimate the cyclic lifetime of circular superheat fuel cladding. One failure relation is based on a displacement method. The other failure relation is based on a stress method. These relations were compared with data from the literature, and with data involving damage obtained by Reynolds. A recommended design procedure involving the relations is presented. The technique was applied to the SADE 4B experiment with moderate success. These cycling relations involve only mechanical damage imposed by cycling, with a modification for additional damage caused by radiation; they do not include any other potential performance limiting mechanisms, such as stress corrosion, which are normally factored into the over-all fuel design. This work work done under Task C (Materials Development) of the Nuclear Superheat Project, AEC Contract AT(04-3)-189 - Project Agreement 13.

Task A: Modification and Preparation of Experimental Facility. Facility engineering and layout is about seventy-five percent complete. Task B: Design and Construction of Test Sections. The major dimensions and characteristics of the metal and glass test sections have been calculated. One feasibility test of the electrically conducting coating on samples of glass tubing has been completed. Task C: Design and Construction of Test Stand, Task E: Pressure and Temperature Instrumentation for Test Section and Task F: Power Supply for Test Section. Preliminary engineering has been initiated on these tasks. The planned approach has been defined in each case. For Task E the transducer specifications have been defined and quotations on and/or sample units of the transducers have been requested. Tasks C and F can proceed with detailing as soon as drafting on Task B is about 50 percent complete. This point is scheduled to be reached during the first part of July. Task D: Void Fraction Instrumentation. The requirements for the x-ray instrumentation have been considered in the course of Task B and the x-ray power supply is presently on hand. The detailed engineering effort on this task is not scheduled to begin before July.

Technical report describing that void measurements were made in the 1/2-inch by 1-3/4-inch rectangular channel, for both flow up and flow down, at pressures of 600, 1000, and 1400 psia, and at various flows and quantities. Results at 1000 psia and 20 percent quality show that for the lowest flow both the void distribution and the average void are much different for flow down than for flow up, the void fraction for flow down being much higher. However, when the flow is increased both the void distribution and average void for flow down tend to approach the corresponding values for flow up. At 1000 psia, both flow up and flow down, the void fraction for 5 percent quality increases gradually from the wall to the center of the channel, and peaks at the center. At 20 percent quality, the void fraction increases abruptly from the wall and tends to be constant over the middle 65 percent of the channel. the void fraction for flow down is always greater than for flow up, other things being equal.

Quarterly progress report on Accurate Nuclear Fuel Burnup Analysis project.

A process was developed in which stainless steel-clad UO2 fuel rods are fabricated by high-temperature coextrusion. The process has a potential of being a more economical method for the preparation of stainless steel-clad UO2 fuel rods than the conventional pellet process. Consequently, it was considered advantageous to evaluate the irradiation characteristics of fuel rods fabricated in this manner. Therefore, 24 coextruded fuel rods were manufactured for evaluation in a reactor. The required amounts of UO2 and clad were soaked in separate containers at 1875 and 760 degree C, respectively. The containers were removed from their respective furnaces and were coextruded in one pass. A force of 450 to 475 tons was used, and a reduction ratio of 18 to 1 was obtained. The coextruded rods were cut to the approximate length, and the ends were sealed with an acid-resistant tape. The carbon steel can covering the stainless steel clad was removed by immersion in 1:1 nitric acid for 20 minutes. The rods were visually inspected, the specified lengths of clad and fuel were obtained by machining, and the correct diameter was obtained by belt sanding. The fabrication of the fuel rods was completed by inserting the plenum support tubes and …

Introduction: The object of Project Agreement 22, Task 1, is to develop improved detectors which can operate up to 1000 F for in-core power monitoring. Several ideas have been developed to achieve this goal: (1) root mean square fluctuation voltage measurement of ion chamber signals, (2) thermocouple-type detectors, and (3) fabrication developments.

Abstract. An a priori calculation of the radiolysis of oxygen gas in the pressure ; range 10-3 to 100 atm has been made. In the low background region (1- 100 atm) all track effects have been considered. The calculated G(O3) values seem to be in reasonable agreement with experiment if only one excited oxygen molecule is initially formed per ion pair. Effects of pressure, LET and dose rate have been discussed. The radiation-induced chain decomposition of O3 has not been considered.

Abstract. By means of the pulse radiolysis technique a short-lived transient species has been observed in irradiated de-aerated ethanol and methanol, exhibiting an optical absorption throughout the visible and near infra-red. This transient is suggested to be the solvated electron on the basis of the nature of the spectrum, the reactivity with hydrogen ion and with various organic electron acceptors, and the formation of mononegative ions of some of these acceptors. The absolute rate constants have been determined for the reactions of the solvated electron with hydrogen ion, oxygen and benzyl chloride in ethanol and methanol. The diphenylide ion was found to be short-lived in ethanol. The absolute rate constant for the first-order decay of the diphenylide ion has been determined.