From introduction: "The work described in this report represents the Joint United States - European Atomic Energy Community effort which is in keeping with the spirit of cooperation in contributing to the common good by the sharing of scientific and technical information and minimizing the duplication of effort by the limited pool of technical talent available in Western Europe and the United States."

Abstract: This technical report covers development of an AG-Cd-In alternate absorber section for Army Type SM reactors. It describes the absorber material composition and the geometric configuration. It gives the nuclear and thermal analyses supporting this configuration and a detailed description of the manufacturing practice employed in fabricating the final design component.

Abstract: This technical report describes the changes incurred in the PM-2A by the planned insertion of PM-2A Core II and the replacement of the startup and check sources. PM-2A Core II components were fabricated to specifications very nearly identical to those of PM-2A Core I. The essential difference in the cores is the boron loading which permits PM-2A Core II to meet a "one-stuck rod criteria" at beginning of life. This core has been subjected to a zero power experiment and loading procedures have been developed at the Alco Critical Facility. The nuclear and thermal and hydraulic characteristics are essentially identical to those of Core I and the replacement of the startup and check sources represent no increase in the potential for or magnitude of a hazardous situation.

Abstract: This technical report analyzes gamma dose rate and neutron measurements in their relation to the SM-1 shield design and is a continuation of previous shielding measurements and analyses reported in APAE-35 and APAE-35 Supplement 2. The data reported herein are spent fuel element and rod drive pit gamma dose rates. An analysis of gamma dose rates off the core midplane is presented and compared with test data.

From abstract: "This report presents the design, fabrication, assembly, operating procedures, and start-up data for six experimental test loops to examine the effect of steel exposed to sodium at temperatures as high as 1300 F."

From summary: "A superposition model is developed to predict the critical heat flux in forced convection flow. The model is applied to available experimental results in boiling water flows and good agreement is obtained between the model and test data over the multitude of geometries, flow rates, pressures, and fluid enthalpies tested to-date."

From abstract: "This report presents the results of a feasibility study on a simplified power conversion unit primarily for use with nuclear, steam power plants for military applications."

From abstract: "Describes Heat Transfer Reactor Experiment No. 3, a solid-moderated nuclear power plant with a horizontal reactor."

Abstract This technical report covers the thermal analysis performed on the SM-1 Core III for both steady state and transient conditions is reported. SM-1 Core III will be used as a test for Type 3 elements in a PM-2A Core. The steady state analysis indicated minimum departure from nucleate boiling ratios (DNBR) for both design and scram conditions above the minimum criteria of 1.5. Local nucleate boiling was noted in the hot internal channels and lattice passage at scram power conditions. Loss of flow transient results indicate DNBR's above 1.5, insuring that the core is safe from burnout. Bulk boiling was noted in the hot channels and lattice passage at scram power condition.