"A method is presented for determining the time-dependent flow over a rectangular wing moving with a supersonic forward speed and undergoing small vertical distortions expressible as polynomials involving spanwise and chordwise distances. The solution for the velocity potential is presented in a form analogous to that for steady supersonic flow having the familiar "reflected area" concept discovered by Evvard. Particular attention is paid to indicial-type motions and results are expressed in terms of generalized indicial forces. Numerical results for Mach numbers equal to 1.1 and 1.2 are given for polynomials of the first and fifth degree in the chordwise and spanwise directions, respectively, on a wing having an aspect ratio of 4" (p. 595).

From Summary: "The results of two investigations, one to determine the relative merits of four experimental and two conventional design 75-millimeter-bore (size 215) cylindrical roller bearings and one to determine the relative merits of nodular iron and bronze as cage materials for this size and type of bearing, are presented in this report. Nine test bearings were operated over a range of dn values (product of bearing bore in mm and shaft speed in r.p.m) from 0.3 x 10(6) to 2.3 x 20(6), radial loads for 7 to 1613 pounds, and oil flows from 2 to 8 pounds per minute with a single-jet circulatory oil feed. Of the six bearings used to evaluate designs, four were experimental types with outer-race-riding cages and inner-race-guided rollers, and two were conventional types, one with outer-race-guided rollers and cage and one with inner-race-guided rollers and cage."

Interaction of convected field of turbulence with shock wave is analyzed to yield modified turbulence, entropy spottiness, and noise generated downstream of the shock. Analysis is generalization of single-spectrum-wave treatment of NACA-TN-2864. Formulas for spectra and correlations are obtained. Numerical calculations yield curves of rms velocity components, temperature, pressure, and noise in db against Mach number for m = 1 to infinity; both isotropic and strongly axisymmetric (lateral/longitudinal = 36/1) initial turbulence are treated. In either case, turbulence of 0.1 percent longitudinal component generates about 120 dbs of noise.