Report discussing an investigation to determine the effects of sweepback and low aspect ratio on the aerodynamic characteristics of a wing at high subsonic Mach numbers. Tests were performed at aspect ratios of 2, 3, and 5 and sweepback angles of 0, 30, and 45 degrees. Generally, sweepback and low aspect ratio were found to both delay and lessen the effects of compressibility.

Report issued by the Bureau of Mines over the manganese deposits in Sierra County, New Mexico. Descriptions of the physicality, and characteristics of the manganese ore are presented. This report includes tables, maps, and illustrations.

Note presenting a derivation of a modified form of Donnell's equation for the equilibrium of thin cylindrical shells which is equivalent to Donnell's equation but has certain advantages in physical interpretation and in ease of solution, particularly in the case of shells with clamped edges. The modified equation can be solved for the buckling stresses of curved sheet having either simply supported or clamped edges by established methods essentially equivalent to those in use for flat sheet.

"The equation for the equilibrium of cylindrical shells introduced by Donnell in NACA Technical Report no. 479 to find the critical stresses of cylinders in torsion is applied to find critical stresses for cylinders with simply supported edges under other loading conditions. It is shown that by this method solutions may be obtained very easily and the results in each case may be expressed in terms of two nondimensional parameters, one dependent on the critical stress and the other essentially determined by the geometry of the cylinder. The influence of boundary conditions related to edge displacements in the shell median surface is discussed" (p. 1).

Note presenting a theoretical solution for the buckling stresses of long plates with transverse curvature loaded in shear and longitudinal direct stress. The theoretical critical-stress combinations for plates with either simply supported or clamped edges are given in figures and tables and a comparison is made with previous theoretical solutions. Results regarding the theoretical results, empirical results and design curves, and some interaction formulas are provided.

"A theoretical solution is presented for the buckling stress of long plates with transverse curvature loaded in shear. The results are given in the form of curves and formulas for plates with simply supported or clamped edges for a wide range of plate dimensions. Comparisons are made with theoretical solutions obtained in previous investigations" (p. 1).

"Empirical design curves are presented for the critical stress of thin-walled cylinders loaded in axial compression. These curves are plotted in terms of nondimensional parameters of small-deflection theory and are compared with theoretical curves derived for the buckling of cylinders with simply supported and clamped edges. An empirical equation is given for the buckling of cylinders having a length-radius ratio greater than about 0.75" (p. 1).

"A theoretical solution is presented for the determination of the combinations of direct axial stress and torsion which cause thin-walled cylinders with either simply supported or clamped edges to buckle. This theoretical solution is used in conjunction with available test data to develop empirical curves and formulas for use in design. Comparisons are made with theoretical and empirical solutions obtained in other investigations" (p. 1).

Note presenting a theoretical solution for the critical stress of thin-walled cylinders loaded in torsion. The results are presented in terms of simple formulas and curves which are applicable to a wide range of cylinder dimensions. The theoretical results are found to be in fairly good agreement with experimental results.

Report issued by the U.S. Bureau of Mines on the sampling of chrome ore deposits in the western United States. Physical properties of the samples collected are presented. This report includes tables.

Report presenting an investigation of a 10.7-percent-thick symmetrical tail section equipped with a flat-side airfoil-chord flap with a flap-chord overhang and a plain flap-chord tab. Airfoil lift, drag, pitching-moment, and flap and tab hinge-moment characteristics were determined at various flap and tab deflections.

"An investigation was made in the Langley two-dimensional low-turbulence tunnel on a wing section for the XB-36 airplane equipped with a double slotted flap to determine the effect on lift and drag of various slot-entry skirt extension. A skirt extension of 0.787 deg. was found to provide the best combination of high maximum lift with flap deflected and law drag with flap retracted. The data showed that the maximum lift at intermediate (20 deg. to 45 deg.) flap deflections was lowered considerably by the slot-entry extension; but at high flap deflections the effect was small" (p. 1).

A major problem encountered in the Manhattan Project was the protection of workers against damage resulting from acute or chronic exposure to external radiation. The problem of how to detect evidence of damage following exposure to total body radiation led to this study. These studies were conducted between January, 1942 and November, 1945. Three groups of persons were employed in this study. The first group of eight individuals harboring incurable neoplasms which was not extensive enough to influence general health, these patients were treated with 400 KV x-radiation while sitting in a wooden chair, doses were 27, 60, and 120r. Three persons having generalized illnesses chronic in nature were given total body radiation using 200 KV X-rays in multiple exposures totaling 100, 300, and 500r. A third group of normal volunteers from personnel of the Metallurgical Laboratory were treated with 200 KV x-rays in three divided doses totaling 21 r. Changes in peripheral blood in the fourteen individuals is reported. In group 1 the most persistent abnormality noted was a diminution in the number of lymphocytes after completion of the treatment. In group 2 a depression in the lymphocytes was also the most marked single change. In group 3 no …

This report for June, 1947 describes progress regarding ore dressing and pyrometallurgical studies, chemical work, analytical work, and beta counting.

The Russian AM 35 and AM 38 aircraft engines have superchargers with a swirl throttle, which appears to be a purely Russian development. This paper gives the results of test runs of the two engines, including the effects of the swirl throttle on engine performance.

Report presenting an investigation of two sharp-edge annular inlets with conical central bodies at low airspeeds in the propeller research tunnel to obtain information concerning the surface-pressure, drag, and pressure-recovery characteristics of the inlets at subsonic flight. Results regarding the nose and inner surface of the diffuser, inlet lips, minimum surface pressures and critical Mach numbers, pressure surveys in inlets, and pressure surveys in diffusers are provided.

Report presenting a method for estimating the control forces of spring-tab ailerons from nonlinear wind-tunnel data. Two principal arrangements of the ailerons and spring unit were used, one with the ailerons interconnected and a central spring unit and an arrangement with no interconnection between the ailerons with individual preloaded spring units for each aileron.

"It is known that compression shocks which lead from supersonic to subsonic velocity cause the flow to separate on impact on a rigid wall. Such shocks appear at bodies with circular symmetry or wing profiles on locally exceeding sonic velocity, and in Laval nozzles with too high a back pressure. The form of the compression shocks observed therein is investigated" (p. 1).

Memorandum presenting a general treatment of compressible flow in ejectors with friction in the mixing tube included. A secondary object is to show the application of the flow theory to the calculation of the effect of ejector addition on thrust of jet-propelled airplanes and missiles. Results regarding the outline of methods of applying the general theory to some other problems and future explorations of ejector problems are provided.

Report presenting the use of wall perforations on supersonic diffusers to avoid the internal contraction-ratio limitation. Experimental results on a preliminary model of a perforated diffuser at Mach number 1.85 are provided. A theoretical discussion of the flow coefficients and the size and spacing of the perforations are included.

"There are investigated the problems of the flow of a supersonic jet out of a vessel with plane side walls and the problem of the supersonic flow about a wedge when there is a zone of local subsonic velocities ahead of the wedge" (p. 1).

From Summary: "A theoretical study, based on the linearized equations of motion for small disturbance, is made of the air forces on wings of general plan forms moving forward at a constant supersonic speed. The boundary problem is set up for both the harmonically oscillating and the steady conditions. Two types of boundary conditions are distinguished, which are designated "purely supersonic" and "mixed supersonic." the method is illustrated by applications to a number of examples for both the steady and the oscillating conditions."

Note presenting a comparison between the measured take-off ground run of an airplane equipped with seven different propeller-engine gear-ratio combinations and the computed distances by two different methods. Results indicated that the values of ground run calculated by Diehl's approximate method checked experimental values with 7 percent but were in error as much as 10 to 15 percent under certain conditions. Improved methods of thrust computation may be required in order to avoid large errors and before any more rigorous methods can be substituted for Diehl's method.

"A fuel-distribution control for continuous-flow manifold injection on reciprocating engines is described. A method is installation of the control on an engine is suggested. The device controlled the flow to four spring-loaded nozzles within 2 percent of perfect distribution over a wide range of fuel-flow rates and the distribution was practically unaffected by uneven discharge-nozzle pressures" (p. 1).