Some advances in passenger comfort are discussed, namely, ventilated cabins, heating, seating arrangements, and doors.

The experiments herein described were made for the purpose of finding whether removing a larger portion of the wing to improve the pilot's view would be possible, without too great detriment to the aerodynamic properties of the airplane. The experiments were conducted on a wing similar to the Fokker F III.

This report presents the results of testing 32 sets of light metal pistons from 16 different aluminum and magnesium alloys, 2 sets of cast iron pistons, and one piston of pure electrolytic copper. The many-fold mutual relations between material properties, shape, thermic and dynamic processes in the engine were clarified by comprehensive technical, thermic, chemical, physical and metallographic investigations of pistons and piston materials.

"In designing the Fakir fuel pump, the fundamental idea was to obtain a simple and reliable method of conveying the fuel from a low tank to the carburetor, with the avoidance of the faults of all former methods and the simultaneous warming of the fuel by means of the heat of compression generated. The principle of the Fakir fuel pump rests on the well-known principle of the diaphragm pump, which must be suitably adapted to the present purpose" (p. 1).

This article presents a recounting of the Rhon soaring competition with emphasis on new designs, results, and prizes awarded. A round-robin discussion is also included at the end of the report.

"It is to be expected that the advantageous properties, hitherto discovered in many slotted wing sections, depend very largely on the contour of the slot and the structural details of the wing. It is therefore of interest, aside from measurements on wings of constant cross-section along the span, to measure also wing models in which the structural details have already been given practical consideration" (p. 1).

The advantages of helicopters are listed along with a discussion of safety devices, the problems of control, and the need for horizontal flight.

An airship frame may be regarded as a rigid girder subjected to a number of forces which, according to their nature, may be classified as follows: weight or loads (force of gravity); lifting forces (aero-static); accelerations (dynamic). These forces must be in equilibrium in the three most important cases during flight: 1) when the airship is floating (aerostatic problem); 2) when flying without acceleration (aerodynamic problem). 3) When under the influence of any accelerating force (dynamic problem). This report will briefly discuss each of these cases in regard to the R-38 airship accident.

This report presents detailed descriptions, statistics, and graphs on European and American air transport. The European countries listed are Belgium, Czecho-Slovakia, Denmark, France, Germany, Great Britain, Holland, and Italy.