Nickel is more susceptible to mass transfer in a 100hr non-isothermal dynamic corrosion system than is Inconel when exposed to a NaCl-MgCl2-UCl3 (50.0-33.3-16.0 mole %) bath at a hot zone temperature 1800 F. No nickel mass transfer was observed in a 500-hr test at 1350 F, but Inconel showed some attack under these conditions. Inconel mass transfer was observed in both tests, being more severe at the higher temperature. On the bases of these preliminary tests, it appears that nickel is a more satisfactory container than Inconel for the chloride bath at temperatures in the region of 1350 F. The chromium is more susceptible to selective leaching from Inconel at 1800 F during a short 100-hr test (0.26% Cr in bath) than in a 500-hr test (<0.001% Cr in bath) at a lower temperature (1350 F ).

Technical report presenting a consideration of the characteristics of fused salt-ThF4 solutions suitable for use in homogeneous reactors. Presented in tandem with a brief survey of the literature pertaining to such solutions and a summary of the experimental work accomplished. [From Abstract]

Data on waste volumes and heat generation of several reactor fuels which may be reprocessed in the Power Reactor Fuel Reprocessing Pilot Plant at ORNL are tabulated.

This report supersedes ORNL CF-57-2-1, which was an extension and revision of ORNL CF-54-6-72. Details concerning a recommended system of flow-plan symbols and drawing are given. The system is designed to identify the function of all major instrument components and to show schematically the operation of the instrument relative to the particular process. The system is used for identification and designation. The system is a modification of the Instrument Society of American Recommended Practice (RP 5.1).

Calculations indicate that single-transfer line concatenated pulse column systems can be operated with static pressures that are not excessive if a sufficient number of vessels are employed in the system. The required number of vessels can be attained by using a series of short columns or by using holdup pots in conjunction with a limited number of columns.