Tutorial description of the Warren machine with a basic introduction to the motivation of the machine and the instructions that define it. Discussion of the fairly limited extensions required to extend the machine for more general use outside of implementations of logic programming. Substantial speedups will occur due to improvements in the implementation of the basic algorithms.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes studies directed toward seeking alternative cathode materials to NiO for molten carbonate fuel cells.

Fluid excitation forces are measured in a water loop for two circular cylinders arranged in tandem and normal to flow. The Strouhal number and fluctuating drag and lift coefficients for both cylinders are presented for various spacings and incoming flow conditions. Results show the effects of Reynolds number, pitch ratio, and upstream turbulence on the fluid excitation forces.

This report summarizes the flow-induced vibration of circular cylinders in quiescent fluid, axial flow, and crossflow, and applications of the analytical methods and experimental data in design evaluation of various system components consisting of circular cylinders.

A set of macro libraries has been developed that allows programmers to write portable FORTRAN code for multiprocessors. This document presents, in tutorial form, the macros used to implement three common synchronization patterns: self-scheduling DO-loops, barrier synchronization, and the askfor monitor.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes activities seeking alternative cathode materials to NiO for molten carbonate fuel cells.

Cold-trap regeneration may be very important in future LMFBRs because of the expected high hydrogen source from the steam generators. This hydrogen precipitates as NaH in the cold trap and may fill the trap within one year of operation. Several methods of cold-trap regeneration were considered, but the simplest and least expensive appears to be decomposition of NaH under vacuum at elevated temperatures. Experiments were done to assess the feasibility of this method for cold-trap regeneration. Small-scale simulated cold traps (SCT) were loaded with NaH and NaH plus Na2O, and were heated both under vacuum and under a sweep gas at 100 kPa. The evolved hydrogen was converted to water by a CuO bed and collected in a weighing tube.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward (1) developing alternative concepts for components of molten carbonate fuel cells and (2) improving understanding of component behavior.

The Physics Division's program in nuclear physics covers a broad span of activities within that discipline. The object of this research is to understand the properties of atomic nuclei, their structure, the mechanisms of nuclear reactions, and manifestations of fundamental symmetries in nuclei. Work is carried out under a variety of subprograms: theory, heavy-ion physics, medium-energy physics and nuclear research. These categories do not represent a sharp separation between people--individual scientists often work in several different areas. This flexibility allows scientific problems to be addressed with a variety of techniques, and it avoids limiting individual scientists' activities to a particular subdiscipline.

The research program in nuclear physics in the Physics Division spans a broad range of activities and contributes to many of the major questions in the discipline. Activities may be roughly divided into three broad categories. Research with the tandem-linac in heavy-ion physics is doing well, though laboring under severe budgetary constraints, and outside use of the facility has increased substantially. Progress on the construction of the full ATLAS facility is coming along expeditiously and it is expected to be completed on schedule in 1985. In medium-energy physics, activities are continuing at LAMPF, as well as other accelerators, though considerable effort was devoted this year to the preparation of a proposal for a national electron accelerator facility.

Quarterly report on the activities of the Argonne National Laboratory Materials Science Division regarding economical conversion of coal into clean and usable alternate fuels will be advanced through the use of durable materials systems. This program is designed to provide part of the materials information necessary for successful operation of coal-conversion systems.

This report describes the work done to further develop the infrared spectroscopic analytical method for the analysis of atmospheric aerosol particles, as well as some exploratory work on a new procedure for determining proton acidity in aerosol samples. Earlier work had led to the successful use of infrared (ir) spectrophotometry for the analysis of nitrate, ammonium, and neutral and acidic sulfates in aerosol samples collected by an impactor on a Mylar-film substrate. In this work, a filter-extraction method was developed to prepare filter-collected aerosol samples for ir analysis. A study was made comparing the ir analytical results on filter-collected samples with impactor-collected samples. Also, the infrared analytical technique was compared in field studies with light-scattering techniques for aerosol analysis. A highly sensitive instrument for aerosol analysis using attenuated total internal reflection (ATR) infrared spectroscopy was designed, built, and tested. This instrument provides a measurement sensitivity much greater (by a factor of 6 for SO4²⁻) than that obtainable using the KBr-pellet method. This instrument collects size- and time-resolved samples and is potentially capable of providing automated, near real-time aerosol analysis. Exploratory work on a novel approach to the determination of proton acidity in filter- or impactor-collected aerosol samples is also described. …

Given a mapping with a sparse Jacobian matrix, the problem of minimizing the number of function evaluations needed to estimate the Jacobian matrix by differences is investigated. This problem can be attacked as a graph coloring problem and this approach leads to very efficient algorithms. The behavior of these algorithms is studied and, in particular, it is proved that two of the algorithms are optimal for band graphs. Numerical evidence is presented which indicates that these two algorithms are nearly optimal on practical problems.

Report discussing a project to design, build, and test a latent heat storage device using cross-linked, high-density polyethylene (HDPE). This report provides an update on progress up to the point that the device is ready to test.

Fluid damping plays an important role for structures submerged in fluid, subjected to flow, or conveying fluid. This design guide presents a summary of calculational procedures and design data for fluid damping for circular cylinders vibrating in quiescent fluid, crossflow, and parallel flow.

The susceptibility of a cantilevered tube conveying water to self-excitation by leakage flow through a slip joint is assessed experimentally. The slip joint is formed by inserting a smaller, rigid tube into the free end of the cantilevered tube. Variations of the slip joint annular gaps and engagement lengths are tested, and several mechanisms for self-excitation are described.

This Phase II study provides further analysis for a seasonal-storage solar-heating system utilizing two existing underground, concrete tanks in the National Historic Park of the Charlestown Navy Yard in Boston. The initial Phase I study was reported in ANL-82-90. The new results focus on the effect of including a heat pump in the system to extend the useful heat-storage capacity of the tanks. The analysis was performed with MINSUN Version III, a computer simulation model written particularly for seasonal storage systems. Input parameters were derived in Phase I and reviewed and updated for this study. Three collector types were studied with and without a heat pump. Results indicate a definite performance and economic improvement for all collector types by including the heat pump. Flat plate collectors showed substantially greater improvement due to their more pronounced increase in efficiency at the lower inlet temperatures. With the heat pump, all three collectors provide comparable performance, and the flat plates were chosen as the design system due to their lower cost. A design system of 2300 meters sq. flat plate collectors with heat pump was selected. The system provides a solar fraction of 50% for the 2167 MWH annual heat load. The annualized …

This report summarizes the work completed on a project concerned with engineering models in dynamic plasticity. The concept of the endochronic theory of viscoplasticity and its subsequent improvement are discussed briefly. Applications and extensions of the theory to various dynamic problems are presented. In particular, the strain-rate effect in the improved endochronic theory and its application to wave propagation problems are discussed. Comparing the numerical results with other calculations and experimental data, it appears that endochronic theory provides a promising representation of realistic material behavior. At the same time endochronic theory is often numerically more efficient than other formulations.

A precision built moveable endplate Geiger-Mueller counter was used to measure the absolute disintegration rate of a beta-emitting radioactive gas. A Geiger-Mueller counter used for measuring gaseous radioactivity has <100% counting efficiency owing to two factors: (1) ''end effect, '' due to decreased and distorted fields at the ends where wire-insulator joints are placed, and (2) ''wall effect, '' due to non-ionization by beta particles emitted near to and heading into the wall. The end effect was evaluated by making one end of the counter movable and measuring counting rates at a number of endplate positions. Much of the wall effect was calculated theoretically, based on known data for primary ionization of electrons as a function of energy and gas composition. Corrections were then made for the ''shakeoff'' effect in beta decay and for backscattering of electrons from the counter wall. Measurements and calculations were made for a sample of krypton-85 (beta energy, 0.67 MeV). The wall effect calculation is readily extendable to other beta energies.

This report presents results from an investigation on the low-frequency fatigue-crack growth behavior of Type 304 stainless steel at 482 and 593 C. Included were continuous-cycling tests with a triangular loading waveform, waveshape-effects tests employing slow-fast, fast-slow and square waveforms, creep-crack growth rate tests, and a block-loading test. The results are compared with similar test data from the literature, and the block-loading test results are compared with results predicted by integrating the relations for da/dN obtained under constant conditions.

This report treats the time-independent, one-speed neutron transport equation with anisotropic scattering in absorbing media. For nuclear gain operators existence and uniqueness of solutions to the half-space and finite-slab problems are proved in L₂-space. The formulas needed for explicit calculations are derived by the use of perturbation theory techniques.

This proceedings covers instruments and process control involved in the conversion of fossil fuels into synthetic fuels, spurred in part by response to the energy crisis of the 1970s and attending inflation.

This memorandum presents the preliminary results of the effort to investigate the applicability of isotope correlation techniques (ICT), formulated for the LWR system, to the LMFBR fuel cycle. The detailed isotopic compositional changes with burnup developed for the CRBR was utilized as the reference case. This differs from the usual LMFBR design studies in that the core uranium is natural uranium rather than depleted. Nevertheless, the general isotopic behavior should not differ significantly and does allow an initial insight into the expected behavior of isotopic correlations for the LMFBR power systems such as: the U.K. PFR and reprocessing plant; the French Phenix and Superphenix; and the US reference conceptual design studies (CDS) of homogeneous and heterogeneous LMFBR systems as they are developed.

Facilitated transport is a process, whereby the diffusion of a solute across a membrane is chemically enhanced. In this report an analysis is given of a facilitated transport system involving a volatile species A which reacts with a nonvolatile carrier species B to form the nonvolatile product AB.