The PATRICIA and RACETRACK particle tracking programs have been compared by tracking on a simple lattice. The dynamic aperture was found to decrease as the number of passes through the lattice per run increased from 20 to approx. 300, and it remained constant for longer runs. The dynamic apertures found by the two programs are consistent. The dependence of the dynamic aperture on horizontal tune near a decapole resonance was investigated. RACETRACK and PATRICIA showed decreases in the aperture on opposite sides of the resonance. A second set of studies was made with PATRICIA in which the dynamic apertures of lattices consisting of cells of the types used for the Reference Designs Study were determined when random multipole errors of the dipoles were included. The dependence of aperture on the number of cells in the lattice was determined. Finally, a comparison of magnet types suggested for the SSC was made by determining the aperture of lattices containing these magnets.

This report describes beam director elements for an experiment at the Advanced Test Accelerator. The elements described include a vernier magnet for beam aiming, an achromat magnet, and an isolation system for the beam interface. These components are built at small scale for concept testing. (JDH)

The W-2 SLSF (Sodium Loop Safety Facility) experiment was an instrumented in-reactor test performed to characterize the failure response of full-length, preconditioned LMFBR prototypic fuel pins to slow transient overpower (TOP) conditions. Although the test results were expected to confirm analytical predictions of upper level failure and fuel expulsion, an axial midplane failure was experienced. Extensive post-test analyses were conducted to understand all of the unexpected behavior in the experiment. (1) The initial post-test effort focused on the temperature oscillations recorded by the 54 thermocouples used in the experiment. In order to synthesize the extensive data records and identify patterns of behavior in the data records, a computer-generated film was used to present the temperature data recorded during the experiment.

Various types of chemical stimulation methods have been considered. High pH fluids seem to be a logical choice for some wellbore and/or reservoir stimulations. However, forming of secondary deposits and creating of new reservoir damages due to chemical reactions between the rock material and these stimulation fluids make it advisable not to consider any of these high pH fluids in high temperature geothermal reservoirs. Fluids having a neutral pH can be successfully used in chemical stimulation methods only in a very few and rare instances. Low pH fluids, i.e. acids, have by far the best chance to be used for these chemical stimulation jobs. The major part of this report is concerned with acidizing techniques for geothermal injection wells. The acidizing techniques to be used for an experimental and the routine stimulation of injection wells are described. Some recent field experiences and the results of some laboratory work are described.

The natural circulation tests of the Fast Flux Test Facility (FFTF) demonstrated a safe and stable transition from forced convection to natural convection and showed that natural convection may adequately remove decay heat from the reactor core. The COBRA-WC computer code was developed by the Pacific Northwest laboratory (PNL) to account for buoyancy-induced coolant flow redistribution and interassembly heat transfer, effects that become important in mitigating temperature gradients and reducing reactor core temperatures when coolant flow rate in the core is low. This report presents work sponsored by the US Department of Energy (DOE) with the objective of checking the validity of COBRA-WC during the first 220 seconds (sec) of the FFTF natural-circulation (plant-startup) tests using recorded data from two instrumented Fuel Open Test Assemblies (FOTAs). Comparison of COBRA-WC predictions of the FOTA data is a part of the final confirmation of the COBRA-WC methodology for core natural-convection analysis.

A brief discussion is given of the characteristics required of new accelerator facilities, leading into a discussion of the required detectors, including position sensitive detectors, particle identification, and calorimeters. (LEW)

A study is made of the linear aperture for the clustered lattice used for the SSC Conceptual Design Report. Random multipole errors are included in all magnetic elements including the insertion dipoles and quadrupoles. Based on the concept of smear, the linear aperture is equal to the dynamic aperture in the range -0.1 less than or equal to ..delta..P/P less than or equal to 0.03%. Strong coupling for ..delta..P/P > 0% produces large smears. A variation of the smear parameter that is insensitive to coupling is proposed. A comparison is made with results reported in the SSC Conceptual Design Report.

The economic future of methanol is reviewed in light of its potential uses as a substitute for traditional hydrocarbon fuels and feedstocks as well as some evolving new uses. Methanol's future market position will depend strongly on its production cost in comparison with competitive products. One promising way to reduce the production cost is by use of an improved catalyst in the process by which methanol is obtained from the feedstock - which can be either natural gas or a similar product such as synthesis gas from coal gasification. To estimate the potential cost savings with an improved catalyst, we have based our analysis on a recent study which assumed use of synthesis gas from underground coal gasification as a feedstock for making methanol. The improved catalyst we studied was an actinide oxide whose features include high tolerance to sulfur and heat, and a yield of about 4 mol% methanol per pass with a 2/1 mixture of H/sub 2//CO. We calculated the effect of this catalyst on methanol production costs in a 12,000-bbl/day plant. The result was a saving of from 1 cent to 2.5 cent per gallon on the total methanol synthesis cost of 23 cents per gallon (i.e., …

The Lawrence Livermore National Laboratory (LLNL) and the US Nuclear Regulatory Commission (NRC) Office of Nuclear Regulatory Research (RES) have applied a systems engineering approach to provide the NRC Office of Inspection and Enforcement (IE) with improved methods and guidance for evaluating the physical protection systems of licensed nuclear facilities.

This report examines various legal issues raised by Federal and State laws restricting foreign ownership in U. S. property. The report examines the constitutional barriers to Federal and State laws restricting such ownership, and the possible constitutional predicates for Federal legislation regulating foreign ownership of property in the united States. The impact of treaties to which the United States is a party on both Federal and State restrictions on the rights of foreign persons to own U.S. property is also discussed.

A two-dimensional finite element model of the LOFT LTSF thermocouple assembly was developed to study the thermal response of the thermocouples to the expected temperature transient in the L3-4, 5 and 6 experiments. Subjecting the thermocouple model to a 10 F fluid temperature step change resulted in a .10 second delay before 95% of the step change was observed in the thermocouple temperature response. A thermal analysis was performed on the Loft Test Support Facility (LTSF) small-break thermocouple assembly to evaluate the thermal response of the thermocouples during the upcoming L3-4, 5 and 6 small-break experiments. The thermocouple assembly (see Figure 1) consists of 3 Type K thermocouples placed radially through an 8 inch diameter section on the pressurizer relief line in the LTSF. In support of the upcoming L3-4, 5 and 6 experiments the LTSF will be used to define thermal conditions expected during these tests. The temperature transients these thermocouples are required to follow are very rapid step changes. Therefore, it is necessary that these thermocouples have a short response time in order to follow the temperature transient in this line. A two-dimensional finite element model of the thermocouple assembly was constructed using COUPLE, a finite element heat …

The author's personal experience in test beam usage at CDF is used to predict SSC needs at the point of turn-on. It is concluded that the test beam demand will reflect the scale of effort involved in SSC detectors rather than the total number of them. Provision for later expansion is recommended. It is also recommended that the test beam facilities, as well as detector electronics, should reflect the available dynamic range; particularly, a single high energy beam derived from the SSC could be shared by several groups. (LEW)

A coupled channel analysis has been carried out using amplitudes of the K/sub s//sup 0/K/sub s//sup 0/ system produced in the reaction ..pi../sup -/p ..-->.. K/sub s//sup 0/K/sub s//sup 0/n at 22 Gev/c, which contained about 40,000 events in the low-t region (absolute value of t-tmin < 0.1 Gev/sup 2/). The I/sup G/ = 0/sup +/, J/sup PC/ = 0/sup + +/, 2/sup + +/, 4/sup + +/ amplitudes from this analysis is considered, together with available data from other experiments in channels with the same quantum numbers in order to determine which 0/sup + +/ and 2/sup + +/ isoscalar mesons have significant pseudoscalar-pseudoscalar couplings. It is found that we need one pole for the 4/sup + +/ amplitudes while the 2/sup + +/ needs five poles and the 0/sup + +/ needs 7 poles.

The invention teaches means for detecting unauthorized tampering or substitutions of a device, and has particular utility when applied on a seal device used to secure a location or thing. The seal has a transparent body wall, and a first indicia, viz., a label identification is formed on the inside surface of this wall. Second and third indicia are formed on the outside surface of the transparent wall, and each of these indicia is transparent to allow the parallax angled viewing of the first indicia through these indicia. The second indicia is in the form of a broadly uniform pattern, viz., many small spaced dots; while the third indicia is in the form of easily memorized objects, such as human faces, made on a substrate by means of halftone printing. The substrate is lapped over the outside surface of the transparent wall. A thin cocoon of a transparent material, generally of the same material as the substrate such as plastic, is formed over the seal body and specifically over the transparent wall and the second and third indicia formed thereon. This cocoon is seamless and has walls of nonuniform thickness. Both the genuineness of the seal and whether anyone has …

This report gives an overview of the Safeguard Vulnerability Analysis Program (SVAP) developed at Lawrence Livermore National Laboratory. SVAP was designed as an automated method of analyzing the safeguard systems at nuclear facilities for vulnerabilities relating to the theft or diversion of nuclear materials. SVAP addresses one class of safeguard threat: theft or diversion of nuclear materials by nonviolent insiders, acting individually or in collusion. SVAP is a user-oriented tool which uses an interactive input medium for preprocessing the large amounts of safeguards data. Its output includes concise summary data as well as detailed vulnerability information.

In 1984, the spillway of Steed Pond fed by Tims Branch collapsed and the pond slowly drained. Consideration was given to leaving the pond dry, but concern was expressed that the uranium accumulated in the sediments from the 300 Area discharges to Tims Branch might be eroded and transported to Upper Three Runs Creek. This study shows that the measured amount of sediment transported to Upper Three Runs Creek from Tims Branch No. 5, about two miles below Steed Pond, was about the same as in past years before the spillway collapsed. What little erosion that has occurred in the exposed sediments will be even less in the future with the revegetation of the exposed sediments. These results indicate that Steed Pond could be left in its present condition (dry) without affecting suspended solids concentrations and associated uranium concentrations in Upper Three Runs Creek. 7 figs.

A simple model of the ablative implosion of a high-aspect-ratio (shell radius to shell thickness ratio) spherical shell is described. The model is similar in spirit to Rosenbluth's snowplow model. The scaling of the implosion time was determined in terms of the ablation pressure and the shell parameters such as diameter, wall thickness, and shell density, and compared these to complete hydrodynamic code calculations. The energy transfer efficiency from ablation pressure to shell implosion kinetic energy was examined and found to be very efficient. It may be possible to attach a simple heat-transport calculation to our implosion model to describe the laser-driven ablation-implosion process. The model may be useful for determining other energy driven (e.g., ion beam) implosion scaling.

Fuel aging studies were performed on the fuel form (plutonium-238 dioxide and yttrium) used in the Milliwatt Generator Radioisotopic Heat Source to determine the possibility of fuel degradation and of the resultant generation of respirable fines. In addition to long-term thermal aging of the fuel, evaluations included the effects of thermal ramping of the aged fuel to 1000/sup 0/C and of impacting thermally hot (450/sup 0/C) heat sources at 150 m/sec after thermal aging.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification; Whether the Liberty and Archives Commission may grant funds to certain regional library systems (RQ-1298)

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification;Whether a city charter provision directing the that the city shall allow discounts for advance payment of taxes mandates the allowance of discounts under article 7255b,V.T.C.S

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification; Whether "public intoxication" is a lesser included offense of "driving while intoxicated."

Newsletter of the Texas Bureau of Disease Control and Epidemiology discussing the news, activities, and events of the organization and other information related to health in Texas.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.