The short wavelength laser code XRASER uses line raidation fields whose dimensions are photons/mode. In this document, we discuss modal photon densities and provide formulas relating these units to units more familiar to the LLNL community.

The x-ray diffraction (XRD) data from 200/sup 0/C/2h-aged uranium-6.5 wt % niobium (U-6.5Nb) alloys, taken under stress as a function of strain, revealed a gamma-zero (..gamma../sup 0/)..-->.. alpha prime-prime (..cap alpha..'') thermoelastic martensitic phase transformation. It was concluded that the primary reversible deformation modes consisted of the movement of ..gamma../sup 0//..cap alpha..'' interphase interfaces and ..cap alpha..'' intervariant interfaces. Specimen elasticity at low strains was associated with the retreat of interphase interfaces. At higher strains, interphase interfaces did not recover significantly on unloading, and elasticity was due primarily to the retreat of ..cap alpha..'' intervariant interfaces.

This report reviews the literature of processes for the nonaqueous separation of zinc from dissolved fuel assembly cladding. The processes considered were distillation, pyrochemical processing, and electrorefining. The last two techniques were only qualitatively surveyed while the first, distillation, was surveyed in detail. A survey of available literature from 1908 through 1978 on the distillation of zinc was performed. The literature search indicated that a zinc recovery rate in excess of 95% is possible; however, technical problems exist because of the high temperatures required and the corrosive nature of liquid zinc. The report includes a bibliography of the surveyed literature and a computer simulation of vapor pressures in binary systems. 129 references.

Thirty-three waste drums were returned to Rocky Flats in support of EG G Idaho's quality control program for the Stored Waste Examination Pilot Plant. The drums were opened and examined in the size reduction facility at the Rocky Flats Plant. Contents of each drum were consistent with the Item Description Codes; however, four sludge drums and one combustible drum contained free liquids. These five drums failed to meet the Waste Isolation Pilot Plant and the Department of Transporation criteria. The proper amount of cement was not used in the sludge drums. A cemented layering process, which also contributed to accumulation of free liquid, is no longer used when cementing sludges at the Rocky Flats Plant. The drum of combustibles contained a polyethylene bottle with a small amount of liquid sludge inside. 2 refs., 2 tabs.

Work on a one interaction-region, push-pull conceptual design for the SLC is described. The concept which has received the most attention is described. It is a below-ground hall - a 15 m deep rectangular pit covered by a surface building which houses counting rooms, power supplies, cryogenics and other auxiliary equipment. (LEW)

This report covers the period from June 2005 through May 2006. During this, the third year of our program, our research has focused mainly on applying the surrogate reaction technique and our newly developed surrogate ratio method to deduce neutron induced fission cross sections on uranium nuclei. The year has been marked by continued scientific progress, by the arrival of new personnel, by a growth in the numbers of students working in the group and by a continuation of our experimental program and close collaboration with staff and scientists from Lawrence Livermore National Laboratory and from Lawrence Berkeley National Laboratory.

Known fossil fuel reserves, especially coal, can support global energy demands for centuries to come, if the environmental problems associated with CO{sub 2} emissions can be overcome. Unlike other CO{sub 2} sequestration candidate technologies that propose long-term storage, mineral sequestration provides permanent disposal by forming geologically stable mineral carbonates. Carbonation of the widely occurring mineral olivine (e.g., forsterite, Mg{sub 2}SiO{sub 4}) is a large-scale sequestration process candidate for regional implementation, which converts CO{sub 2} into the environmentally benign mineral magnesite (MgCO{sub 3}). The primary goal is cost-competitive process development. As the process is exothermic, it inherently offers low-cost potential. Enhancing carbonation reactivity is key to economic viability. Recent studies at the U.S. DOE Albany Research Center have established that aqueous-solution carbonation using supercritical CO{sub 2} is a promising process; even without olivine activation, 30-50% carbonation has been achieved in an hour. Mechanical activation (e.g., attrition) has accelerated the carbonation process to an industrial timescale (i.e., near completion in less than an hour), at reduced pressure and temperature. However, the activation cost is too high to be economical and lower cost pretreatment options are needed. We have discovered that robust silica-rich passivating layers form on the olivine surface during carbonation. As …

We analyze the behavior of Euler-Maclaurin-basedintegrationschemes with the intention of deriving accurate andeconomicestimations of the error term.

Zircaloy cladding tubes strain in-situ during service life in the corrosive environment of a Pressurized Water Reactor for a variety of reasons. First, the tube undergoes stress free growth due to the preferential alignment of irradiation induced vacancy loops on basal planes. Positive strains develop in the textured tubes along prism orientations while negative strains develop along basal orientations (Reference (a)). Second, early in life, free standing tubes will often shrink by creep in the diametrical direction under the external pressure of the water environment, but potentially grow later in life in the diametrical direction once the expanding fuel pellet contacts the cladding inner wall (Reference (b)). Finally, the Zircaloy cladding absorbs hydrogen as a by product of the corrosion reaction (Reference (c)). Once above the solubility limit in Zircaloy, the hydride precipitates as zirconium hydride (References (c) through (j)). Both hydrogen in solid solution and precipitated as Zirconium hydride cause a volume expansion of the Zircaloy metal (Reference (k)). Few studies are reported on that have investigated the influence that in-situ clad straining has on corrosion of Zircaloy. If Zircaloy corrosion rates are governed by diffusion of anions through a thin passivating boundary layer at the oxide-to-metal interface (References …

A new Meson West Target has been proposed for Tevatron II. The dump design proposed by David Eartly is shown. A longitudinal side view of the dump and the shield for target produced muons is shown. The core of the dump is seen to be a copper plate surrounding the beam. The copper is surrounded by iron, which is in turn shielded by concrete. The tunnel is embedded in sand and gravel. The sand and gravel within 3' of the concrete is continuously drained by underdrains. Soil below the top of the underdrains is not considered to be protected. Activity produced in the unprotected soil below can be leached out, transported to the aquifer, and subsequently reach public water supplies. It is the activation of this unprotected soil which is of particular interest. Since the specific type of beryllium target to be used has not yet been decided, and since it would only reduce the resultant soil activation, I have chosen to ignore it and to presume that all the targetted intensity is lost on the dump. I have made CASIM calculations of the levels of soil activation to be expected using the proposed dump design. Since the activation of …

This report addresses the configuration of Tatum Salt Dome, Lamar County, Mississippi.

'This monthly report summarizes Programs and Accomplishments of the Savannah River Technology Center in support of activities at the Savannah River Site. The following categories are addressed: Reactor, Tritium, Separations, Environmental, Waste Management, General, and Items of Interest.'

Title II of the Energy Conservation and Production Act (ECPA) as amended by the Public Utility Regulatory Policies Act (PURPA) provided financial assistance to state utility regulatory commissions, nonregulated electric utilities, and the Tennessee Valley Authority through the Innovative Rates Program. The financial assistance was to be used to plan or carry out electric utility regulatory rate reform initiatives relating to innovative rate structures that encourage conservation of energy, electric utility efficiency and reduced costs, and equitable rates to consumers. The Federal and local objectives of the project are described. Activities planned and accomplishments are summarized for the following: project management, data collection, utility bill evaluation, billing enclosure/mailing evaluation, media program evaluation, display evaluation, rate study sessions evaluation, speakers bureau evaluation, and individual customer contacts. A timetable/milestone chart and financial information are included. (MHR)

Methods of integrating data from the Near-Surface Test Facility into the overall Waste Isolation Program are examined. Discussions are presented dealing primarily with the application of numerical models to the design of a waste repository. The various types of models currently available are discussed with reference to design in basalt and the breakdown of the problem of repository design is summarized. It is shown that the most efficient method for analyzing repository design is to break the problem down into several problems which are based on physical scale. These include the area directly surrounding a single waste canister (the very near field), the area including many canisters and canister emplacement rooms (the near field), and the area including the entire repository and the rock mass to the free surface (the far field). The methods by which numerical models are used for design are discussed. Flow charts are used to show the basic input data required, the calculational processes used, and the preliminary criteria for judgment of suitable repository performance. It is shown that the ultimate design of the allowable gross thermal loading density, and, thus, the layout of the underground workings is highly dependent upon the rock mass properties supplied …

Experiments have been developed for measuring the rates of chemical reactions liquids and in supercritical Co[sub 2]. A pulsed (Q-switch) Nd:YAG laser at 355 nm was the pump beam for laser flash photolysis studies of molybdenum and tungsten hexacarbonyls undergoing ligand displacement reactions by bidentate chelating agents such as 2,2[prime]-bipyridine in toluene. Experiments were carried out at 0.1 to 150 MPa. In the case of molybdenum complexes, the reaction mechanism for thermal ring closure is found from activation volumes to change from associative interchange to dissociative interchange as substituents on the 2,2[prime]-bipyridine ligands become bulkier. In a similar study of more rigid, substituted phenanthroline bidentate ligands it was found that substituent bulkiness had little effect on the thermal ring closure mechanism. Similar high pressure flash photolysis experiments with tungsten hexacarbonyl have also been completed. The concentration dependence of the fluorescence and nonradiative decay quantum yields for cresyl violet in several solvent have been reported as well as stability constants for the complexation of lithium ion by four different crown ethers dissolved in a room temperature molten salt.

This report, from the Chemical Processing Department at HAPO for May 1963, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations, facilities engineering; research; employee relations; weapons manufacturing operation; and power and crafts operation.

This is a progress report of the production reactors on the Hanford Reservation for the month of May 1951. This report takes each division (e.g., manufacturing, medical, accounting, occupational safety, security, reactor operations, etc.) of the site and summarizes its accomplishments and employee relations for that month.

Operation of the D and F Piles is reported. Other items reported are: general; water, corrosion and engineering (graphite expansion).

This report, for May 1962 from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; employee relations; and safety and security.

Experiments have been developed for measuring the rates of chemical reactions liquids and in supercritical Co{sub 2}. A pulsed (Q-switch) Nd:YAG laser at 355 nm was the pump beam for laser flash photolysis studies of molybdenum and tungsten hexacarbonyls undergoing ligand displacement reactions by bidentate chelating agents such as 2,2{prime}-bipyridine in toluene. Experiments were carried out at 0.1 to 150 MPa. In the case of molybdenum complexes, the reaction mechanism for thermal ring closure is found from activation volumes to change from associative interchange to dissociative interchange as substituents on the 2,2{prime}-bipyridine ligands become bulkier. In a similar study of more rigid, substituted phenanthroline bidentate ligands it was found that substituent bulkiness had little effect on the thermal ring closure mechanism. Similar high pressure flash photolysis experiments with tungsten hexacarbonyl have also been completed. The concentration dependence of the fluorescence and nonradiative decay quantum yields for cresyl violet in several solvent have been reported as well as stability constants for the complexation of lithium ion by four different crown ethers dissolved in a room temperature molten salt.

This report details activities of the N-Reactor Design Analysis Unit for the month of June 1966.

The objective of the production test detailed in this report is to evaluate Zr-5 w/o Be brazed end closures on enriched tube-and-tube elements irradiated in high temperature coolant in the KER Loops.

The May, 1957 monthly report for the Chemical Processing Department of the Hanford Atomic Products Operation includes information regarding research and engineering efforts with respect to the Purex and Redox process technology. Also discussed is the production operation, finished product operation, power and general maintenance, financial operation, engineering and research operations, and employee operation.(MB)

This document presents a summary of work and progress at the Hanford Engineer Works for May, 1956. The report is divided into sections by department. A plant wide general summary is included at the beginning of the report, after which the departmental summaries begin. The Manufacturing department reports plant statistics, and summaries for the Metal Preparation, Reactor and Separation sections. The Engineering Department`s section summarizes work for the Technical, Design, and Project Sections. Costs for the various departments are presented in the financial Department`s summary. The Medical, Radiological Sciences, Utilities and General Services, Employee and Public Relations, and Community Real Estate and Services departments have sections presenting their monthly statistics, work, progress, and summaries.