The author show that using existing electron gun technology and a high energy linac like the one at SLAC, it is possible to build a Free Electron Laser operating around the 4 nm water window. A modest improvement in the gun performance would further allow to extend the FEL to the 0.1 nm region. Such a system would produce radiation with a brightness many order of magnitude above that of any synchrotron radiation source, existing or under construction, with laser power in the multigawatt region and subpicosecond pulse length.

Pinhole-assisted point-projection backlighting with 10{micro}m and 5 {micro}m pinholes placed a small distance of order 1 mm away from the backlighter produces images with large field of view and high resolution. Pinholes placed closely to high-power backlighter sources can vaporize and close due to x-ray driven ablation, thereby limiting the usefulness of this method. A study of streaked 1-D backlit imaging of 25 {micro}m W wires using the OMEGA laser is presented. The pinhole closure timescale for 10 {micro}m pinholes placed 0.45 mm and 1 mm distant from the backlighter is 1.3 ns and 2.2 ns, respectively. Similar timescales for 5 {micro}m pinholes is also presented. Successful wire imaging prior to pinhole closure is clearly demonstrated.

None

For years shipping packages have been used to store radioactive materials at many DOE sites. Recently, the K-Area Material Storage facility at the Savannah River Site became interested in and approved the Model 9977 Shipping Package for use as a storage package. In order to allow the 9977 to be stored in the facility, there were a number of evaluations and modifications that were required. There were additional suggested modifications to improve the performance of the package as a storage container that were discussed but not incorporated in the design that is currently in use. This paper will discuss the design being utilized for shipping and storage, suggested modifications that have improved the storage configuration but were not used, as well as modifications that have merit for future adaptations for both the 9977 and for other shipping packages to be used as storage packages.

Understanding the evolution of microstructure in welds is an important goal of welding research because of the strong correlation between weld microstructure and weld properties. To achieve this goal it is important to develop a quantitative measure of phase transformations encountered during welding in order to ultimately develop methods for predicting weld microstructures from the characteristics of the welding process. To aid in this effort, synchrotron radiation methods have been developed at Lawrence Livermore National Laboratory (LLNL) for direct observation of microstructure evolution during welding. Using intense, highly collimated synchrotron radiation, the atomic structure of the weld heat affected and fusion zones can be probed in real time. Two synchrotron-based techniques, known as spatially resolved (SRXRD) and time resolved (TRXRD) x-ray diffraction, have been developed for these investigations. These techniques have now been used to investigate welding induced phase transformations in titanium alloys, low alloy steels, and stainless steel alloys. This paper will provide a brief overview of these methods and will discuss microstructural evolution during the welding of low carbon (AISI 1005) and medium carbon (AISI 1045) steels where the different levels of carbon influence the evolution of microstructures during welding.

We review recent progress in the following areas of the impedance theory: calculation of impedance of tapers and small angle collimators; optical approximation and parabolic equation for the high-frequency impedance; impedance due to resistive inserts in a perfectly conducting pipe.

As part of a program to characterize and baseline selected environmental parameters in the region around the proposed repository at Yucca Mountain, Nevada, ambient radon-222 monitoring was conducted in the rural community of Amargosa Valley, the community closest to the proposed repository site. Passive integrating radon monitors and a continuous radon monitoring instrument were deployed adjacent to the Community Environmental Monitoring Program (CEMP) (http://www.cemp.dri.edu/index.html) station located in the Amargosa Valley Community Center near the library. The CEMP station provided real-time ambient gamma exposure and meteorological data used to correct the integrated radon measurements as well as verify meteorological data collected by the continuous radon monitoring instrument. Additionally, different types of environmental enclosures that housed the monitors and instrument were used to determine if particular designs influenced the ambient radon measurements.

This report provides a summary of the gross gamma ray data for the 241-B Tank Farm and is intended to identify changes in the gamma activity of gamma-emitting radionuclide contaminants around each accessible borehole, and is not intended to provide interpretation of the data relative to vadose zone mechanics. Trends in data, as well as areas where additional information would be helpful in evaluating the unusual nature of some of the data, are discussed.

This report provides a summary of the gross gamma ray data for the 241-T Tank Farm and is intended to identify changes in the gamma activity of gamma-emitting radionuclide contaminants around each accessible borehole.

Comparisons of the multicycle results demonstrate that the correlation coefficients based on the CASMO3 data were implemented correctly and that the Linear Reactivity Model is acceptably accurate for missed reloads containing both uranium and weapons plutonium fuel. The expanded set of correlation coefficients make BRACC a useful tool for performing multi-cycle in-core fuel management studies of PWR cores containing weapons plutonium.

N/A

Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. The 2007 inspection program revealed that the structural integrity and waste confinement capability of the Savannah River Site waste tanks were maintained. A very small amount of material had seeped from Tank 12 from a previously identified leaksite. The material observed had dried on the tank wall and did not reach the annulus floor. A total of 5945 photographs were made and 1221 visual and video inspections were performed during 2007. Additionally, ultrasonic testing was performed on four Waste Tanks (15, 36, 37 and 38) in accordance with approved inspection plans that met the requirements of WSRC-TR-2002- 00061, Revision 2 'In-Service Inspection Program for High Level Waste Tanks'. The Ultrasonic Testing (UT) In-Service Inspections (ISI) are documented in a separate report that is prepared by the ISI programmatic Level III UT Analyst. Tanks 15, 36, 37 and 38 are documented in 'Tank Inspection NDE Results for Fiscal Year 2007'; WSRC-TR-2007-00064.

Experimental data in the literature on the physical, thermodynamic, and transport properties of aqueous LiOH are summarized. The behavior of some properties is predicted beyond the range of the data. 12 fig, 14 tables, 20 references.

The Argonne Boundary Layer Experiments (ABLE) facility, located in south central Kansas, east of Wichita, is devoted primarily to investigations of and within the planetary boundary layer (PBL), including the dynamics of the mixed layer during both day and night; effects of varying land use and land form; the interactive role of precipitation, runoff, and soil moisture; storm development; and energy budgets on scales of 10 to 100 km. Located entirely within the Walnut River watershed, ABLE provides intense measurements within the northeast quadrant (Fig. 1) of the Southern Great Plains (SGP) Cloud and Radiation Testbed (CART) of the Atmospheric Radiation Measurement (ARM) Program (Stokes and Schwarz, 1994). By combining the continuous measurements of ABLE with ancillary continuous measurements of, for example, the ARM and the Global Energy Water cycle Experiment (GEWEX) (Kinster and Shukla, 1990) programs, ABLE provides a platform within which shorter, more intensive studies, such as those conducted by the Cooperative Atmosphere-Surface Exchange Studies (CASES) Program, can realize the full benefit of a wide variety of atmospheric measurements on many scales; this allows the study of hypothesized features of PBL development and dynamics, including frontal dynamics, nocturnal boundary development and breakdown, urban heat island effects, precipitation enhancement, …

LiCoO{sub 2} is the most common lithium storage material used as positive electrode in lithium rechargeable batteries. Ordering of lithium and vacancies has a profound effect on the physical properties of Li{sub x}CoO{sub 2} and the electrochemical performances of lithium batteries. An exit surface wave (ESW) phase image reconstructed from experimental images obtained on the LBNL One-Angstrom Microscope (OAM) shows all three types of atoms in LiCoO{sub 2}.

None

This paper describes design and operation of the flashlamp test system, used to evaluate the primary laser flashlamps on the National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory (LLNL) in Livermore, California. The tester delivers repetitive high voltage pulses to a series pair of flashlamps at levels closely simulating those encountered in normal operation. Each lamp pair is subjected to a pre-ionization and main pulse shot sequence, with two minute intervals between shots. This capability allows the manufacturer to test and evaluate the flashlamps for infant mortality and longevity before delivery to NIF. All operations are under computer control with fully automated test and data acquisition capabilities requiring minimal operator input. The system is designed to operate continuously. Typical pre-ionization and main pulse outputs are: (1) Pre-ionization Pulse--V{sub chg} = 27kV, I{sub peak} = 3kA, E = 2.4kJ; Pulse Width--(10%-90%) - 200us; Main Pulse--V{sub chg} = 23kV, I{sub peak} - 24kA, E - 78.6kJ; and Pulse Width--(10%-90%) - 350us.

Traditional algorithms for automatic target cueing (ATC) in hyperspectral images, such as the RX algorithm, treat anomaly detection as a simple hypothesis testing problem. Each decision threshold gives rise to a different set of anomalous pixels. The clustered Rx algorithm generates target cues by grouping anomalous pixels into spatial clusters, and retaining only those clusters that satisfy target specific spatial constraints. It produces one set of target cues for each of several decision thresholds, and conservatively requires {Omicron}(K{sup 2}) operations per pixel, where K is the number of spectral bands (which varies from hundreds to thousands in hyperspectral images). A novel ATC algorithm, known as ''Pixel Cluster Cueing'' (PCC), is discussed. PCC groups pixels into clusters based on spectral similarity and spatial proximity, and then selects only those clusters that satisfy target-specific spatial constraints as target cues. PCC requires only {Omicron}(K) operations per pixel, and it produces only one set of target cues because it is not an anomaly detection algorithm, i.e., it does not use a decision threshold to classify individual pixels as anomalies. PCC is compared both computationally and statistically to the RX algorithm.

This report is a descriptive journey of the Autophosphorylation of the DNA-Dependent Protein Kinase Catalyticsubunit is Required for Rejoining of DNA Double-Strand Breaks.

Bacterialmicrocompartments (BMCs) are organelles composed entirely of protein. They promote specific metabolic processes by encapsulatingand colocalizing enzymes with their substrates and cofactors, by protecting vulnerable enzymes in a defined microenvironment, and bysequestering toxic or volatile intermediates. Prototypes of the BMCsare the carboxysomes of autotrophic bacteria. However, structures of similarpolyhedral shape are being discovered in an ever-increasing number of heterotrophic bacteria, where they participate in the utilization ofspecialty carbon and energy sources.Comparative genomics reveals that the potential for this type of compartmentalization is widespread acrossbacterial phyla and suggests that genetic modules encoding BMCs are frequently laterally transferred among bacteria. The diverse functionsof these BMCs suggest that they contribute to metabolic innovation in bacteria in a broad range of environments.

On March 25, 2002 the FNAL Linac had been running at a decreased 40 ma of beam current for some time. Both the 400 MeV Linac and the 8GeV Booster had been tuned to optimum running during that time. Optimum running for the Booster was at 4.1e12 per pulse. Losses at injection and at transition were limiting intensity at the time. By March 26, 2002 the Linac beam current had been increased to 49 ma. The optimum Booster intensity immediately jumped to 4.5e12 per pulse and increased in the next few days to 4.8e12 and 5e12 per pulse. Booster was not retuned until early April when a low-loss 5.0e12 was obtained for stacking operations. Linac current had sagged to 47 ma by then. Measurements were made on the 25th at 40 ma and the 26th and 27th at 49 ma. This is a report and discussion of those measurements.

Economizer use in data centers is an energy efficiency strategy that could significantly limit electricity demand in this rapidly growing economic sector. Widespread economizer implementation, however, has been hindered by potential equipment reliability concerns associated with exposing information technology equipment to particulate matter of outdoor origin. This study explores the feasibility of using economizers in data centers to save energy while controlling particle concentrations with high-quality air filtration. Physical and chemical properties of indoor and outdoor particles were analyzed at an operating northern California data center equipped with an economizer under varying levels of air filtration efficiency. Results show that when improved filtration is used in combination with an economizer, the indoor/outdoor concentration ratios for most measured particle types were similar to levels when using conventional filtration without economizers. An energy analysis of the data center reveals that, even during the summer months, chiller savings from economizer use greatly outweigh any increase in fan power associated with improved filtration. These findings indicate that economizer use combined with improved filtration could reduce data center energy demand while providing a level of protection from particles of outdoor origin similar to that observed with conventional design.

Beryllium casting is a relatively new technology with the successful cast of large ingots being developed during the last decade. In 1961, Rocky Flats initiated a beryllium ingot-sheet fabrication process that included the development of new techniques to consistently cast large sound beryllium ingots. This report reviews the casting technology that was developed to cast these beryllium ingots on a production basis along with some of the remaining technical problems requiring additional development work.

Results are reported in two areas: (1) understanding the mechanism of superplasticity in those that show unusual resistance to intergranular cavitation, and (2) understanding the growth of heteroepitaxial films of oxides by CVD (NiO, TiO{sub 2}).