None

The general Wigner-Eisenbud theory is used to develop a method of analysis for the cross sections of fissionable nuclei. The method is employed in gdving a reasonable description of the low energy cross sections in U/sup 235/. The single level fit for U/sup 235/ is known to be unreasonable. Manylevel expressions for the cross sections are derived--the only approximation to the general theory being the neglect of all but a small group of resonances. It is shown that regardless of the number or definition of the fission channels the many-level expressions require few level parameters: the E/sub lambda /, GAMMA / sub lambda n/, GAMMA /sub lambda gamma / and GAMMA /sub lambda F/ of the single level theory for each resonance and a few additional parameters pertinent to the interference between levels. The interference terms are described and shown to be important. The shape and size of the U/sup 235/ cross sections below 2 ev are fitied to within one per cent using (a) only one negative energy resonance of smaller size than in the single level fits (b) no additional levels to fit the shape other than the observed levels at positive energiess (c) three interference purameters whose …

None

None

None

None

None

None

Disposal of wastes from the processing of solid fuel elements and from solid blanket elements is discussed. The subjects considered include extraction of uranium by several methods, the removal of element jackets, the treatment of uraxium -zirconium fuel elements, disposal into deep wells, the hydraulics of wells, thermal considerations of disposal aquifers regional hydrology, potential deep-well disposal areas in the U. S., aud the cost of disposal. (J.R.D.)

A report about selenium which can be determined in pyrite, chalcocite, and marcasite by a spectrochemical method that is simple and rapid, and that requires no complicated arrangement of spectrographic equipment, or chemical pretreatment of samples.

This report analyzes the characteristics of three vanadium-uranium ores of the Colorado Plateau by prevalence of a number of low-valence vanadium oxide minerals, usually occurring as fine-grained mixtures. The ores being analyzed are haggite, doloresite, and duttonite.

The following report covers the study of the Chattanooga shale and Maury formation found between the Nashville Basin and the surrounding Highland Rim.

Report discussing the geochemistry of uranium in phosphorites and black shales of the phosphoria formation, with the assumption that the immediate source of the uranium in the Phosphoria formation was the ocean.

The following report covers detailed investigations on botanical methods of prospecting for uranium that have been developed on the Colorado Plateau by the U.S. Geological Survey.

The following report is based mainly on information obtained from lithologic and gamma-ray logs of drill holes in the Lakeland Highlands area and Clark James-South Ridgewood.

An experimental study was made of the mass transport of chromium in poly- thermal Inconel-fluoride fuel systems. The transport of chromium was followed by toe technique of adding radioactive Cr/sup 51/ to the system as either CrF/sub 2/ , in the salt or as elemental chromium in the solid phase. The rates of diffusion of chromium in Inconel at 600, 700, 800, and 900 deg C were determined by an electropolishing technique. Polythermal studies were carried out by three methods, tilting capsules, thermal-convection loops, and pumping loops. Tilting- capsule experiments indicated that the preferred location for chromium deposition on the wall was in the region of maximum temperature but the conclusions were not clear cut. Thermal convection loops operated for 125 and 288 hr showed radioactivity profile which could be attributed to simple exchange, with some distortion in the 288 hr case. The duration of these experiments was evidently insufficient io allow equilibrium to be reached in the salt. A thermal- convection loop operated for 400 hr showed distortion in the exchange radioactivity profile which indicated a favorable position for chromium deposition at a point about 100 deg F below the maximum wall temperature, and on the upstream side of …

This is the monthly report for the Hanford Laboratories Operation, May, 1957. Metallurgy, reactor fuels, chemistry, dosimetry, separation processes, reactor technology, financial activities, visits, biology operation, physics and instrumentation research, and employee relations are discussed.

This report describes the steps of impeachment, including initiation, investigation, and voting.

The following report summarizes the results of the laboratory-scale work and pilot-plant scale work of a salt-batch composition that reduces the hydrogen pickup by uranium rods during the beta heat treatment, and the study of the influence of humidity over the salt bath on hydrogen pickup.

This report discusses tests on the preparation and cladding of hot-pressed and pressure-bonded titanium-boron. It explores the properties of titanium-boron as a control material in reactors.

The following report follows the procedures to compact blends of uranium tetrafluoride and magnesium, describing how lubrication of the compact effects the outcome of the blends.

The following report follows an experimental study that was made on the mass transport of chromium in polythermal inconel-fluoride fuel systems, followed by the technique of adding radioactive chromium-51 to the system as either CrF3 in the salt or as elemental chromium in the solid phase.

This report describes the operation of the fuels preparation department for the month of May, 1957. Manufacturing, employee relations, process development, plant improvements, and financial operations are described.

The purpose of this memorandum is to outline the high temperature hydride moderator program proposed for the.Metallurgy Division. The objectives of this program are (1) to provide physical and mechanical property data required by the reactor designers, (2) to develop methods for fabricating moderator assemblies, and (3) to devise.and conduct tests to evaluate these· assemblies. The requirements in each of these areas and the work proposed to meet them are outlined.