The MERIT experiment, which ran at CERN in 2007, is a proof-of-principle test for a target system that converts a 4-MW proton beam into a high-intensity muon beam for either a neutrino factory complex or a muon collider. The target system is based on a free mercury jet that intercepts an intense proton beam inside a 15-T solenoidal magnetic field. Here, we describe the design and performance of the 15-T, liquid-nitrogen-precooled, copper solenoid magnet.

The MERIT experiment, to be run at CERN in 2007, is a proof-of-principle test for a target system that converts a 4-MW proton beam into a high-intensity muon beam for either a neutrino factory complex or a muon collider. The target system is based on a free mercury jet that intercepts an intense proton beam inside a 15-T solenoidal magnetic field. Here, we describe the design and initial performance of the 15-T, liquid-nitrogen-precooled, copper solenoid magnet.

The first in a new series of high-power pulsed klystrons has been tested with the following results: Frequency = 11.4 GHz, beam voltage = 415 kV, power output = 51 MW, pulse length = 1.5 {mu}s, and efficiency = 37%. Several tubes of this type will be used in the Next Linear Collider Test Accelerator (NLCTA) at SLAC. The rf performance of the klystron, which employs a standing-wave extended-interaction output circuit, is closely approximated by simulations performed with the SLAC CONDOR code. The same code predicts considerably higher efficiency, using a traveling-wave output circuit. A klystron with such a circuit will be constructed in the future. Another klystron is also planned in which beam confinement is accomplished by a periodic permanent magnet (PPM) stack, for which simulations also predict good performance.

{sm_bullet} 55-gallon drums were overpacked into 85-gallon drums {sm_bullet} ANucFiI-007LS long-stem filter was installed- NucFiI certified the use of NucFiI-007LS filters in 8S-gallon drums as DOT 7AType A - Wood wedges were used during the tests to center and . stabilize the inner 55-gallon drums {sm_bullet} During inspection, afew filters were found to be loose, canted, and/or with RTV seals broken - No contamination or loss of container integrity {sm_bullet} Discovered in November 2008 U.

The present configuration of an ILC main LINAC RF station has 26 nine cell cavities driven from one klystron. With the addition of waveguide power coupler monitors, 96 RF signals will be down-converted and processed. A down-converter chassis is being developed that contains 12 eight channel analog modules and a single upconverter module. This chassis will first be deployed for testing a cryomodule composed of eight cavities located at New Muon Laboratory (NML) - Fermilab. Critical parts of the design for LLRF applications are identified and a detailed description of the circuit with various characteristic measurements is presented. The board is composed of an input band-pass filter centered at 1.3GHz, followed by a mixer, which down-converts the cavity probe signal to a proposed 13 MHz intermediate frequency. Cables with 8 channels per connector and good isolation between channels are being used to interconnect each down-converter module with a digital board. As mixers, amplifiers and power splitters are the most sensitive parts for noise, nonlinearities and crosstalk issues, special attention is given to these parts in the design of the LO port multiplication and distribution.

The development of voltage and current probes for measuring an electron beam's current and position associated with several microsecond-long pulses from advanced Linear Induction Accelerators requires a precision pulser that can deliver both high voltages and high currents to a diagnostics Test Line. Seven-stage, type-E PFNs have been utilized in both a transformer and 4-stage Marx (plus/minus) configuration. The resulting 50-ohm pulser delivers to the Test Line a repeatable 100 kV, ca. 2 {micro}s flat-top ({+-} 1%), 2.5 {micro}s FWHM pulse with a rise time of 175 ns and 500 ns for the transformer and Marx options, respectively. Methods of reducing the rise time for both options are discussed and modeled. The coaxial Test Line is insulated at up to two atmospheres with SF{sub 6} and includes two transition regions to hold and test different diameter beam current and position monitors (BPMs). The center conductor incorporates both translation and tip/tilt with an accuracy of 100 {micro}m. Finally, the line is terminated in a matched radial resistor that provides a planar region at fields up to 40 kV/cm for the testing of voltage probes. Both the transformer and Marx options are modeled and compared to experimental results.

We describe the design, fabrication, analysis and preliminary testing of the prototype 201 MHz copper cavity for a muon ionization cooling channel. Cavity applications include the Muon Ionization Cooling Experiment (MICE) as well as cooling channels for a neutrino factory or a muon collider. This cavity was developed by the US muon cooling (MUCOOL) collaboration and is being tested in the MUCOOL Test Area (MTA) at Fermilab. To achieve a high accelerating gradient, the cavity beam irises are terminated by a pair of curved, thin beryllium windows. Several fabrication methods developed for the cavity and windows are novel and offer significant cost savings as compared to conventional construction methods. The cavity's thermal and structural performances are simulated with an FEA model. Preliminary high power RF commissioning results will be presented.

A new underground beamline is being constructed at Fermilab to generate and focus a beam of neutrinos on a detector 450 miles away in Soudan, Minnesota. A compact modulator utilizing capacitive energy storage and SCRs as the switching element has been built and tested at Fermilab. The 0.9 F capacitor bank operates at less than 1 kV. It delivers its output of up to 240 kA directly to the two series connected focusing horns via a multi-layer radiation hard stripline [1]. Dual pulse width capability allows for ready selection of 5.2 ms, for slow beam spills, or 2.6 ms operation for reduced thermal stresses on the focusing horns during fast spill. Intended for installation in an underground equipment room, the design incorporates several novel features to facilitate transport, installation, and maintenance. Various designs were examined to arrive at the most economical approach for providing the high pulse currents to the horns located in the very high radiation field, up to 3 x 10{sup 7} kRads/yr absorbed dose of the beamline. These included charge recovery and electronic polarity reversal systems. The direct coupling approach was selected for its overall economy and compactness. The system has been operational for several months and …

Poster for WindPower 2006 held June 4-7, 2006, in Pittsburgh, PA, describing the 225-kW dynamometer for testing small wind turbine components.

This paper describes NREL's new 225-kW dynamometer facility that is suitable for testing a variety of components and subsystems for small wind turbines and discusses opportunities for industry partnerships with NREL for use of the facility.

This report contains abstracts from the 11th topical conference on high-temperature plasma diagnostics.

Retention of tritium in carbon co-deposits is a serious concern for ITER. Developing a reliable in-situ removal method of the co-deposited tritium would allow the use of carbon plasma-facing components which have proven reliable in high heat flux conditions and compatible with high performance plasmas. Thermal oxidation is a potential solution, capable of reaching even hidden locations. It is necessary to establish the least severe conditions to achieve adequate tritium recovery, minimizing damage and reconditioning time. The first step in this multi-machine project is {sup 13}C-tracer experiments in DIII-D, JET, C-Mod and MAST. In DIII-D and JET, {sup 13}CH{sub 4} has been (and in C-Mod and MAST, will be) injected toroidally symmetrically, facilitating quantification and interpretation of the results. Tiles have been removed, analyzed for {sup 13}C content and will next be evaluated in a thermal oxidation test facility in Toronto with regard to the ability of different severities of oxidation exposure to remove the different types of (known and measured) {sup 13}C co-deposit. Removal of D/T from B on Mo tiles from C-Mod will also be tested. OEDGE interpretive code analysis of the {sup 13}C deposition patterns is used to generate the understanding needed to apply findings to ITER. …

A report dedicated to the 1985 EPRI/IIE Geothermal Conference and Workshop

As Low As Reasonably Achievable (ALARA) radiation exposure levels were implemented on January 1, 1991, by Westinghouse Hanford Company (WHC), a prime US Department of Energy (DOE) contractor, located in Richland, Washington. This paper describes the radiation exposure levels which were implemented and the associated experiences and lessons learned. The issue of a report from the Committee on Biological Effectiveness of Ionizing Radiation in 1989 prompted DOE to re-evaluate its position on radiation exposure limits and the resulting doses received by occupational radiation workers. DOE requested that all it`s contractors determine the impacts to operations from reduced radiation exposure levels.

The Gordon Research Conference (GRC) on CATALYSIS was held at Colby-Sawyer College from 6/23/02 thru 6/28/02. The Conference was well-attended with 118 participants. The attendees represented the spectrum of endeavor in this field coming from academia, industry, and government laboratories, both U.S. and foreign scientists, senior researchers, young investigators, and students.

This article is a detailed description of the Gordon Research Conference on Atomic Physics.

This report is on Cellulases and Cellulosomes on Gordon Research Conferences.

The post-genomic era presents new opportunities for manipulating plant chemistry for improvement of plant traits such as disease and stress resistance and nutritional qualities. This conference will provide a setting for developing multidisciplinary collaborations needed to unravel the dynamic complexity of plant metabolic networks and advance basic and applied research in plant metabolic engineering. The conference will integrate recent advances in genomics, with metabolite and gene expression analyses. Research discussions will explore how biosynthetic pathways interact with regard to substrate competition and channeling, plasticity of biosynthetic enzymes, and investigate the localization, structure, and assembly of biosynthetic metabolons in native and nonnative environments. The meeting will develop new perspectives for plant transgenic research with regard to how transgene expression may influence cellular metabolism. Incorporation of spectroscopic approaches for metabolic profiling and flux analysis combined with mathematical modeling will contribute to the development of rational metabolic engineering strategies and lead to the development of new tools to assess temporal and subcellular changes in metabolite pools. The conference will also highlight new technologies for pathway engineering, including use of heterologous systems, directed enzyme evolution, engineering of transcription factors and application of molecular/genetic techniques for controlling biosynthetic pathways.

The first Gordon Research Conference on Multiphoton Processes, was held in 1982. The meeting continues to evolve as it embraces both the rapid technological and intellectual growth in the field as well as the multi-disciplinary expertise of the participants. Current areas of interest include: (1) Ionization/Dissociation of Atoms and Molecules in Intense Laser Fields; (2) Frequency Domain Multi-Photon and Multiple-Resonance Spectroscopies of Molecules; (3) Time-Resolved Photoelectron Spectroscopy; (4) Ultrafast Pump-Probe Spectroscopy; (5) Coherent Strong-Field Manipulation of Atoms and Molecules; (6) High-Harmonic Generation; (7) Attosecond Pulse Generation and Measurement; and (8) Super-Intense Laser-Matter Interactions. In developing the program, the conference organizers will strive to blur traditional disciplinary boundaries, involving chemists, physicists, and optical engineers, representing both experiment and theory, as presenters and discussion leaders. The broad range of expertise and different perspectives of attendees should provide a stimulating and unique environment for solving problems and developing new ideas in this rapidly evolving field.

The theme of the fifth Gordon Research Conference on Radiation and Climate is 'Integrating multiscale measurements and models for key climate questions'. The meeting will feature lectures, posters, and discussion regarding these issues. The meeting will focus on insights from new types of satellite and in situ data and from new approaches to modeling processes in the climate system. The program on measurements will highlight syntheses of new satellite data on cloud, aerosols, and chemistry and syntheses of satellite and sub-orbital observations from field programs. The program on modeling will address both the evaluation of cloud-resolving and regional aerosol models using new types of measurements and the evidence for processes and physics missing from global models. The Conference will focus on two key climate questions. First, what factors govern the radiative interactions of clouds and aerosols with regional and global climate? Second, how well do we understand the interaction of radiation with land surfaces and with the cryosphere?

The Atomic and Molecular Interactions Gordon Conferences is justifiably recognized for its broad scope, touching on areas ranging from fundamental gas phase and gas-condensed matter collision dynamics, to laser-molecule interactions, photophysics, and unimolecular decay processes. The meeting has traditionally involved scientists engaged in fundamental research in gas and condensed phases and those who apply these concepts to systems of practical chemical and physical interest. A key tradition in this meeting is the strong mixing of theory and experiment throughout. The program for 2008 conference continues these traditions. At the 2008 AMI GRC, there will be talks in 5 broadly defined and partially overlapping areas of intermolecular interactions and chemical dynamics: (1) Photoionization and Photoelectron Spectroscopy; (2) Molecules in Strong Fields; (3) Photodissociation Dynamics; (4) Astrochemistry; and (5) Reaction Dynamics. These areas encompass many of the most productive and exciting areas of chemical physics, including both reactive and nonreactive processes, intermolecular and intramolecular energy transfer, and photodissociation and unimolecular processes. Gas phase dynamics, van der Waals and cluster studies, laser-matter interactions and multiple potential energy surface phenomena will all be discussed. Limited funds are available to support attendance for students and post-docs. Advisors should email the conference chair requesting such support, …

The Cellular and Molecular Fungal Biology Conference provides a forum for presentation of the latest advances in fungal research with an emphasis on filamentous fungi. This open-registration scientific meeting brings together the leading scientists from academia, government and industry to discuss current research results and future directions at Holderness School, an outstanding venue for scientific interaction. A key objective of the conference is to foster interaction among scientists working on model fungi such as Saccharomyces cerevisiae, Schizosaccharomyces pombe, Neurospora crassa and Aspergillus nidulans and scientists working on a variety of filamentous fungi whose laboratory tractability is often inversely proportional to their medical, industrial or ecological importance. Sessions will be devoted to Systems Biology, Fungi and Cellulosic Biomass, Small RNAs, Population Genomics, Symbioses, Pathogenesis, Membrane Trafficking and Polarity, and Cytoskeleton and Motors. A session will also be devoted to hot topics picked from abstracts. The CMFB conference provides a unique opportunity to examine the breadth of fungal biology in a small meeting format that encourages in-depth discussion among the attendees.

The 2010 Gordon Conference on Correlated Electron Systems will present cutting-edge research on emergent properties arising from strong electronic correlations. The Conference will feature a wide range of topics, such as the role of topology in condensed matter systems, quantum Hall interferometry and non-Abelian statistics, quantum criticality, metal-insulator transition, quantum effects in conductivity, Dirac quasiparticles, and superconductivity in cuprates and pnictides. In addition, we are reserving two sessions for new developments in this field that may arise in the coming year. The Conference will bring together a collection of investigators who are at the forefront of their field, and will provide opportunities for junior scientists and graduate students to present their work in poster format and exchange ideas with leaders in the field. We intend to have talks by established leaders in the field and also by young researchers who have made seminal contributions to various aspects of correlated electron physics, The collegial atmosphere of this Conference, with programmed discussion sessions as well as opportunities for informal gatherings in the afternoons and evenings, provides an avenue for scientists from different disciplines to brainstorm and promotes cross-disciplinary collaborations in the various research areas represented.

The Inorganic Chemistry GRC is one of the longest-standing of the GRCs, originating in 1951. Over the years, this conference has played a role in spawning many other GRCs in specialized fields, due to the involvement of elements from most of the periodic table. These include coordination, organometallic, main group, f-element, and solid state chemistries; materials science, catalysis, computational chemistry, nanotechnology, bioinorganic, environmental, and biomedical sciences just to name a few. The 2010 Inorganic Chemistry GRC will continue this tradition, where scientists at all levels from academic, industrial, and national laboratories meet to define the important problems in the field and to highlight emerging opportunities through exchange of ideas and discussion of unpublished results. Invited speakers will present on a wide variety of topics, giving attendees a look at areas both inside and outside of their specialized areas of interest. In addition to invited speakers, the poster sessions at GRCs are a key feature of the conference. All conferees at the Inorganic Chemistry GRC are invited to present a poster on their work, and here the informal setting promotes the free exchange of ideas and fosters new relationships. As in previous years, we will offer poster presenters the opportunity to …