Inorganic analysis of solid, liquid and gaseous samples from the Paraho Semiworks Retort was completed using a multitechnique approach. The data were statistically analyzed to determine both the precision of each method and to see how closely the various techniques compared. The data were also used to determine the redistribution of 31 trace and major elements in the various effluents, including the offgas for the Paraho Retort operating in the direct mode. The computed mass balances show that approximately 1% or greater fractions of the As, Co, Hg, N, Ni, S and Se are released during retorting and redistributed to the product shale oil, retort water or product offgas. The fraction for these seven elements ranged from almost 1% for Co and Ni to 50 to 60% for Hg and N. Approximately 20% of the S and 5% of the As and Se are released. The mass balance redistribution during retorting for Al, Fe, Mg, V and Zn was observed to be no greater than .05%. These redistribution figures are generally in agreement with previous mass balance studies made for a limited number of elements on laboratory or smaller scale pilot retorts. 7 tables.

The latest available experimental results on the luminosity, the space charge parameters, and the beam blowup as functions of particle energy and beam current are reviewed. The comparison with the phenomenological diffusion theory is done and useful scaling laws are derived. Some implications for anti p p storage rings are discussed.

Discussion is presented to substantiate, clarify and reinterpret some of the results of the above authors for the existence and origin of tempered martensite embrittlement (TME) in relation to retained austenite, with reference to the experimental steels worked at LBL for the past several years.

The conference included 10 papers, one of which appeared previously under conference number Conf: 770675-1. Separate abstracts were prepared for the remaining nine papers. (JFP)

Separate abstracts were prepared for each of the 16 included papers. (MOW)

We show the sensitivity of various experimental measurements to one-loop radiative corrections in SU/sub 2/ x U/sub 1/. Models considered are the standard GSW model as well as extensions of it which include extra quarks and leptons, SUSY and certain technicolor models. The observation of longitudinal polarization is a great help in seeing these effects in asymmetries in e/sup +/e/sup -/ ..-->.. ..mu../sup +/..mu../sup -/, tau/sup +/tau/sup -/ on Z/sup 0/ resonance. 25 refs., 22 figs., 10 tabs.

Field-reversed configurations of energetic large orbit ions with neutralizing electrons have been proposed as the basis of a fusion reactor. Vlasov equilibria consisting of a ring or an annulus have been investigated. A stability analysis has been carried out for a long thin layer of energetic ions in a low density background plasma. There is a growing body of experimental evidence from tokamaks that energetic ions slow down and diffuse in accordance with classical theory in the presence of large non-thermal fluctuations and anomalous transport of low energy (10 keV) ions. Provided that major instabilities are under control, it seems likely that the design of a reactor featuring energetic self-colliding ion beams can be based on classical theory. In this case a confinement system that is much better than a tokamak is possible. Several methods are described for creating field reversed configurations with intense neutralized ion beams.

Within the last few years, there have also appeared in the Heavy-Ion Fusion literature several studies of targets which have outer tampers. One-dimensional simulations indicate higher target gains with a judicious amount of tamping. But for these targets, a full investigation has not been carried through in regards to conservative criteria for fluid instabilities as well as reasonable imperfections in target fabrication and illumination symmetry which all affect target ignition and burn. Comparisons of these results with the gain survey of Part I would have to be performed with care. These calculations suggest that experiments relating to high temperature disk heating, as well as beam deposition, focusing and transport can be performed within the context of current design proposals for accelerator test-facilities. Since the test-facilities have lower ion kinetic energy and beam pulse power as compared to reactor drivers, we achieve high-beam intensities at the focal spot by using short focal distance and properly designed beam optics.

Environmental problems related to the use and disposal of fluids can accompany the operation of geothermal power plants using hot water resources (temperature > 150/sup 0/C). More than 100 kg of fluids must be extracted, processed, and disposed for each kW.h of electricity generated from a facility relying on a geothermal reservoir with fluids of 150/sup 0/C. The low thermal efficiencies of geothermal power plants result in large requirements for cooling water - over 7.4 x 10/sup 4/ m/sup 3//MW.y compared with 1.7 x 10/sup 4/ m/sup 3//MW.y for coal-fired plants. Geothermal fluids can contain as much as 250,000 mg/1 total dissolved solids. Toxic substances like boron and NH/sub 3/ are often present in fluids. This paper focuses on impacts associated with accidental releases of geothermal fluids as well as the disposal of liquid and solid wastes. The consequences of consuming alternative sources of cooling water are also addressed. Inadvertent discharges of fluids are of concern because they could contaminate soils and surface waters, adversely affecting crops and aquatic organisms. The pretreatment of fluids before subsurface injection could lead to solid waste problems - especially when toxic substances are produced. The consumption of alternative cooling waters can pose problems involving …

The purpose of this paper is to present a review and status report to those in theoretical chemistry of the rapidly developing surface science of heterogeneous catalysis. The art of catalysis is developing into science. This profound change provides one with opportunities not only to understand the molecular ingredients of important catalytic systems but also to develop new and improved catalyst. The participation of theorists to find answers to important questions is sorely needed for the sound development of the field. It is the authors hope that some of the outstanding problems of heterogeneous catalysis that are identified in this paper will be investigated. For this purpose the paper is divided into several sections. The brief Introduction to the methodology and recent results of the surface science of heterogeneous catalysis is followed by a review of the concepts of heterogeneous catalysis. Then, the experimental results that identified the three molecular ingredients of catalysis, structure, carbonaceous deposit and the oxidation state of surface atoms are described. Each section is closed with a summary and a list of problems that require theoretical and experimental scrutiny. Finally attempts to build new catalyst systems and the theoretical and experimental problems that appeared in the …

A device to search for fractional charge in matter is described. The sample is coupled to a low-noise amplifier by a periodically varying capacitor and the resulting signal is synchronously detected. The varying capacitor is constructed as a rapidly spinning wheel. Samples of any material in volumes of up to 0.05 ml may be searched in less than an hour.

Dileptons are shown to be of interest in helping probe extreme conditions of temperature and density in nuclear matter. The current state of experimental knowledge about dileptons is briefly described, and their use in upcoming experiments with light ions at CERN SPS are reviewed, including possible signatures of quark matter formation. Use of dileptons in an upcoming experiment with a new spectrometer at Berkeley is also discussed. This experiment will probe the nuclear matter equation of state at high temperature and density. 16 refs., 8 figs. (LEW)

The D-T burn time for advanced laser-fusion targets is calculated to be very short, < 50 ps. We describe the design of a neutron streak camera of 16 ps resolving time that can be used to study the temporal history of fusion burn. The cathode of the neutron streak camera is sensitive to neutrons and is curved such that the difference in the neutron path lengths from a point source to various parts of the cathode is compensated by electron transit times within the streak tube. Thus the cathode can be made large for high sensitivity, without sacrificing time resolution. The cathode is coated with 1 ..mu..m UO/sub 2/. Each fission fragment leaving the cathode generates 400 secondary electrons that are all < 20 eV. These electrons are focussed to a point with an extractor and an anode, and are then purified with an electrostatic deflector. The electron beam is streaked and detected with the standard streak camera techniques. Careful shielding is needed for x-rays from the fusion target and general background. It appears that the neutron streak camera can be a viable and unique tool for studying temporal history of fusion burns in D-T plasmas of a few keV …

The spatial dependence of the energy deposition in the fragmentation regions is estimated for nuclear collisions at ISR energies, ..sqrt..s/A >approx. 30 GeV/nucleon. Two models (the trailing cascade and sequential decay scenarios) are contrasted. The results are compared to the quark-gluon plasma energy density computed via QCD lattice methods.

Information is presented concerning new trends in licensing; seismic considerations and system structural behavior; TMI-2 risk assessment and thermal hydraulics; statistical assessment of potential accidents and verification of computational methods; issues with respect to improved safety; human factors in nuclear power plant operation; diagnostics and activities in support of recovery; LOCA transient analysis; unresolved safety issues and other safety considerations; and fission product transport.

Eleven 17 m long, 40 mm aperture SSC R D superconducting collider dipole magnets, built at BNL, have been extensively tested at BNL and Fermilab during 1990--91. Quench performance of these magnets and details of their mechanical behavior are presented. 7 refs., 5 figs.

The Equation of State (EOS) relates diagonal elements of the energy-momentum tensor {theta}{sub {mu}{nu}}. The first moment of the energy-momentum tensor generates scale transformations. The virial theorem, a consequence of the behavior of the energy density under scale transformations, allows one to eliminate the kinetic energy in terms of the potential terms. The trace theorem for the energy-momentum tensor expresses {epsilon}-3p in terms of ensemble averages of scale-breaking operators, allowing a new approach to the EOS. 10 refs.

In 1979-1980 two large earthquakes of local magnitude (M/sub L/) greater than 6.0 occurred near the Cerro Prieto geothermal field. It has been suggested that related to these seismic events there was an abrupt temperature increase in the wells completed in the shallow (alpha) reservoir. A careful study of the geochemistry of the produced fluids, as well as a cursory reservoir engineering analysis, cannot confirm either the data or the hypothesis of a massive influx of hot water into the system related to those events. Our study shows that the cold water recharge of the alpha reservoir in response to the production-induced drawdown continued, unaffected by the two earthquakes.

During the next two years, the Fermilab Tavatron is expected to deliver approximately 100pb{sup {minus}1} of integrated luminosity. We describe improvements to the CDF detector since the 1988--89 collider run and discuss the prospects for the discovery of the top quark during the 1992--93 collider runs.

Numerical studies are performed to investigate the effects of localized feed zones on the pressure transients in two-phase reservoirs. It is shown that gravity effects can significantly affect the pressure transients, because of the large difference in the density of liquid water and vapor. Pressure transients for shallow and deep feed zones and the resulting fluid flow patterns are discussed.

The electrical conductivity of shock compressed liquid nitrogen was measured in the pressure range 20 to 50 GPa using a two-stage light-gas gun. The conductivities covered a range 4 x 10/sup -2/ to 1 x 10/sup 2/ ohm/sup -1/ cm/sup -1/. The data are discussed in terms of a liquid semiconductor model below the onset of the dissociative phase transition at 30 GPa. 15 refs., 1 fig.

Information is presented concerning fire risk and protection; transient thermal-hydraulic analysis and experiments; class 9 accidents and containment; diagnostics and in-service inspection; risk and cost comparison of alternative electric energy sources; fuel behavior and experiments on core cooling in LOCAs; reactor event reporting analysis; equipment qualification; post facts analysis of the TMI-2 accident; and computational methods.

A three-dimensional thermal analysis has been performed using finite difference techniques to determine the near-field response of a baseline spent fuel repository in a deep geologic salt medium. A baseline design incorporates previous thermal modeling experience and OWI recommendations for areal thermal loading in specifying the waste form properties, package details, and emplacement configuration. The base case in this thermal analysis considers one 10-year old PWR spent fuel assembly emplaced to yield a 36 kw/acre (8.9 w/m/sup 2/) loading. A unit cell model in an infinite array is used to simplify the problem and provide upper-bound temperatures. Boundary conditions are imposed which allow simulations to 1000 years. Variations studied include a comparison of ventilated and unventilated storage room conditions, emplacement packages with and without air gaps surrounding the canister, and room cool-down scenarios with ventilation following an unventilated state for retrieval purposes. At this low power level ventilating the emplacement room has an immediate cooling influence on the canister and effectively maintains the emplacement room floor near the temperature of the ventilating air. The annular gap separating the canister and sleeve causes the peak temperature of the canister surface to rise by 10/sup 0/F (5.6/sup 0/C) over that from a …

A series of multifilamentary APC Nb-Ti superconductors have been made with Nb added as a normal second phase to provide flux pinning centers. Two compositions, 12.5% vol % and 25 vol % Nb in Nb-Ti, have fabricated into multifilamentary composites using two different fabrication methods. One method used hot isostatic compaction and hot extrusion thoughout the processing. The other method (bundle-and-draw process) discontinued all hot processing at an intermediate level. While the J{sub c} values of the bundle-and-draw wires are quite promising, the critical current of the extruded wires appears to be limited by poor uniformity of the filament cross-sectional area along the conductor length. The large values of the index of the resistive transition and small filament standard-deviation-to-average area ratios observed in the wires produced by the bundle-and-draw process suggest extrinsic factors have little effect on J{sub c}. The variation in J{sub c} as the wire diameter is reduced appears to be most strongly affected by intrinsic factors: Nb distribution and pinning strength. The final filament microstructure and Nb spacing are shown to be difficult to calculate, e.g., the mean Nb spacing near the final wire size may be {1/2} to 1/3 that of the calculated value. 5 refs., …