The First Amendment to the United States Constitution provides that “Congress shall make no law . . . abridging the freedom of speech, or of the press. . . .” This language restricts government both more and less than it would if it were applied literally. It restricts government more in that it applies not only to Congress, but to all branches of the federal government, and to all branches of state and local government. It restricts government less in that it provides no protection to some types of speech and only limited protection to others. This report provides an overview of the major exceptions to the First Amendment — of the ways that the Supreme Court has interpreted the guarantee of freedom of speech and press to provide no protection or only limited protection for some types of speech.

A beam profile monitor for H-beams based on laser photoneutralization is being developed at Brookhaven National Laboratory (BNL) for use on the Spallation Neutron Source (SNS) [l]. An H ion has a first ionization potential of 0.75eV and can be neutralized by light from a Nd:YAG laser (h=1064nm). To measure beam profiles, a narrow laser beam is passed through the ion beam neutralizing a portion of the H-beam struck by the laser. The laser trajectory is stepped across the ion beam. At each laser position, the reduction of the beam current caused by the laser is measured. A proof-of-principle experiment was done earlier at 750keV. This paper reports on measurements made on 200MeV beam at BNL and with a compact scanner prototype at Lawrence Berkeley National Lab on beam from the SNS RFQ.

This letter report documents the results of a computer model to quantify the travel time of tritium (radioactive hydrogen) from an underground nuclear detonation in 1969 toward a proposed producing gas well located 1,500 feet (457 meters) away.

We present an updated design for a proposed source of ultra-fast synchrotron radiation pulses based on a recirculating superconducting linac, in particular the incorporation of EUV and soft x-ray production. The project has been named LUX - Linac-based Ultrafast X-ray facility. The source produces intense x-ray pulses with duration of 10-100 fs at a 10 kHz repetition rate, with synchronization of 10 s fs, optimized for the study of ultra-fast dynamics. The photon range covers the EUV to hard x-ray spectrum by use of seeded harmonic generation in undulators, and a specialized technique for ultra-short-pulse photon production in the 1-10 keV range. High-brightness rf photocathodes produce electron bunches which are optimized either for coherent emission in free-electron lasers, or to provide a large x/y emittance ration and small vertical emittance which allows for manipulation to produce short-pulse hard x-rays. An injector linac accelerates the beam to 120 MeV, and is followed by four passes through a 600-720 MeV recirculating linac. We outline the major technical components of the proposed facility.

Accurate timing of ultrafast x-ray probe pulses emitted from a synchrotron radiation source with respect to the signal initiating a process in the sample under study is critical for the investigation of structural dynamics in the femtosecond regime. We describe schemes for achieving accurate timing of femtosecond x-ray synchrotron radiation pulses relative to a pump laser, where x-rays pulses of <100 fs duration are generated from the proposed LUX source based on a recirculating superconducting linac. We present a description of the timing signal generation and distribution systems to minimize timing jitter of the x-rays relative to the experimental lasers.

None

In this quarter, our primary effort has been focused on model verification, emphasizing on consistency in result for parallel and serial simulation runs, Progress has been made in refining the parallel thermal algorithms and in diminishing discretization effects in the contact region between the rollers and slab. We have received the metrology data of the ingot profile at the end of the fifth pass from Alcoa. Detailed comparisons between the data and the initial simulation result are being performed. Forthcoming from Alcoa are modifications to the fracture model based on additional experiments at lower strain rates. The original fracture model, was implemented in the finite element code, but damage in the rolling simulation was not correct due to the modeling errors at lower strain rates and high stress triaxiality. Validation simulations for the fracture model will continue when the experimentally-based adjustments to the parameter values become available.

This report introduces some of the issues that are influencing the development of a conservation title. It then reviews major provisions passed by both chambers, followed by some of the alternative conservation proposals that were offered. An appendix compares current law with the conservation provisions, as passed by both chambers, in more detail.

This report offers the most recent development regarding the soil and water conservation topics and current major conservation activities. The report addresses these conservation topics; what should be the priorities for the conservation effort; and deciding whether any existing programs or activities should be modified or eliminated and whether new programs or activities should be added to the effort.

Quantum Monte Carlo (QMC) is an extremely powerful method to treat many-body systems. Usually quantum Monte Carlo has been applied in cases where the interaction potential has a simple analytic form, like the 1/r Coulomb potential. However, in a complicated environment as in a semiconductor heterostructure, the evaluation of the interaction itself becomes a non-trivial problem. Obtaining the potential from any grid-based finite-difference method, for every walker and every step is unfeasible. We demonstrate an alternative approach of solving the Poisson equation by a classical Monte Carlo within the overall quantum Monte Carlo scheme. We have developed a modified ''Walk On Spheres'' algorithm using Green's function techniques, which can efficiently account for the interaction energy of walker configurations, typical of quantum Monte Carlo algorithms. This stochastically obtained potential can be easily incorporated within popular quantum Monte Carlo techniques like variational Monte Carlo (VMC) or diffusion Monte Carlo (DMC). We demonstrate the validity of this method by studying a simple problem, the polarization of a helium atom in the electric field of an infinite capacitor.

At the National Ignition Facility (NIF), 192 laser beams will compress a target containing a mixture of deuterium and tritium (DT) that will release fusion neutrons, photons, and other radiation. Diagnostics are being designed to measure this emitted radiation to infer crucial parameters of an ignition shot. Chemical Vapor Deposited (CVD) diamond is one of the ignition diagnostics that will be used as a neutron time-of-flight detector for measuring primary (14.1 MeV) neutron yield, ion temperature, and plasma areal density. This last quantity is the subject of this study and is inferred from the number of downscattered neutrons arriving late in time, divided by the number of primary neutrons. We determine in this study the accuracy with which this detector can measure areal density, when the limiting factor is detector and electronics saturation. We used laser-produced x-rays to reproduce NIF signals in terms of charge carriers density, time between pulses, and amplitude contrast and found that the effect of the large pulse on the small pulse is at most 8.4%, which is less than the NIF accuracy requirement of {+-} 10%.

The Spallation Neutron Source Ring accumulates about 1060 pulses of 38mA peak current IGeV H-minus particles from the Linac thru the HEBT line, then delivers this accumulated beam in a single pulse to the mercury target via the RTBT line. Bunching frequency of beam in the HEBT line is 402.5MHz, and about 1MHz in the Ring and RTBT. Position monitor electrodes in HEBT are of the shorted stripline type, with apertures of 12cm except in the dispersive bend, where the aperture is 21cm. Ring and RTBT electrodes are open striplines, with apertures of 21, 26, 30, and 36cm. All pickups are dual plane. The electronics will be PC-based with the Analog/Digital Front End passing data and receiving control and timing thru a custom PC1 interface developed by LANL[l]. LabVIEW will be used to direct the acquisition, process the data, and transfer results via Ethernet to the EPICS control system. To handle the dynamic range required with well over 60dB variation in signal size, the Ring and RTBT electronics will employ a fast gain switching technique that will take advantage of the 300ns tail-to-head gap to provide position measurement during the entire accumulation cycle. Beam-based alignment will be utilized as part …

Letter from Representatives Peter DeFazio, Earl Blumenauer, Darlene Hooley, and David Wu concerning Oregon's military installations.

The purpose of this letter is to submit to Naval Reactors the initial plan for the Prometheus project Reactor Safety work. The Prometheus project is currently developing plans for cold physics experiments and reactor prototype tests. These tests and facilities may require safety analysis and siting support. In addition to the ground facilities, the flight reactor units will require unique analyses to evaluate the risk to the public from normal operations and credible accident conditions. This letter outlines major safety documents that will be submitted with estimated deliverable dates. Included in this planning is the reactor servicing documentation and shipping analysis that will be submitted to Naval Reactors.

This report assesses the potential for future precipitation of expansive phases that could cause fracturing in saltstone. It examines the equilibrium case using The Geochemist's Workbench{reg_sign} reaction path model. The scenarios simulated examine the effects of different possible infiltrating fluids, different saltstone formulations, and different amounts of minerals available for reaction. Mineralogy of the vault cement and saltstone were estimated using reported chemical compositions of each. The infiltrating fluid was assumed to be either rainwater equilibrated with vault cement or rainwater itself. The simulations assumed that minerals were homogeneously distributed in saltstone and that each pore volume of infiltration reached equilibrium with the mineral assemblage. Fracturing that initiates in pores by expansive phase precipitation is unlikely to occur in saltstone because the maximum amount of porosity filled is 34%. If less than 100% of the saltstone minerals are available for reaction, less porosity will be lost to expansive phases. Likewise, the formulation of saltstone used will affect the amount of porosity filled by expansive phases.

This report provides information about The 2003 Treaty on Extradition Between the United States and Great Britain where the treaty proved controversially before the senate would give its contest it insisted upon modifications, some quite unusual.

The bilateral relationship between the U.S. and the People's Republic of China (PRC) is vitally important, touching on a wide range of areas including, among others, economic policy, security, foreign relations, and human rights. This report addresses relevant policy questions in current U.S.-China relations, discusses trends and key legislation in the current Congress, and provides a chronology of developments and high-level exchanges.

Wind River Resources Corporation (WRRC) received a DOE grant in support of its proposal to acquire, process and interpret fifteen square miles of high-quality 3-D seismic data on non-allotted trust lands of the Uintah and Ouray (Ute) Indian Reservation, northeastern Utah, in 2000. Subsequent to receiving notice that its proposal would be funded, WRRC was able to add ten square miles of adjacent state and federal mineral acreage underlying tribal surface lands by arrangement with the operator of the Flat Rock Field. The twenty-five square mile 3-D seismic survey was conducted during the fall of 2000. The data were processed through the winter of 2000-2001, and initial interpretation took place during the spring of 2001. The initial interpretation identified multiple attractive drilling prospects, two of which were staked and permitted during the summer of 2001. The two initial wells were drilled in September and October of 2001. A deeper test was drilled in June of 2002. Subsequently a ten-well deep drilling evaluation program was conducted from October of 2002 through March 2004. The present report discusses the background of the project; design and execution of the 3-D seismic survey; processing and interpretation of the data; and drilling, completion and production …

None

Multi-pass gas tungsten arc welds of Alloy 22 were subjected to solution annealing durations of 20 minutes, 24 hours, 72 hours and 1 week at temperatures of 1075, 1121, 1200, and 1300 C. The specimens were studied in cross section by secondary electron microscopy to determine the effect of solution annealing on tetrahedrally close packed (TCP) precipitate stability. Electron backscatter diffraction mapping was also performed on all of the specimens to determine the recrystallization behavior of the welds. It was found that complete TCP precipitate dissolution occurs after solution annealing at 1075 C and 1121 C for 24 hours, and at 1200 C and 1300 C for durations of 20 minutes. Regions of most rapid recrystallization were correlated to the regions of lowest solute content and highest residual tensile stresses. Texture analysis indicated that while the columnar dendrites originally present in the weld grew with a <001> orientation in the transverse direction (opposite the heat flow direction), the recrystallized grains adopt a <101> orientation in the transverse direction when recrystallization and TCP phase dissolution occur simultaneously.

The objective of this paper is to present the Bechtel Jacobs Company, LLC (BJC) Lessons Learned for system design as it relates to safety basis documentation. BJC has had to reconcile incomplete or outdated system description information with current facility safety basis for a number of situations in recent months. This paper has relevance in multiple topical areas including documented safety analysis, decontamination & decommissioning (D&D), safety basis (SB) implementation, safety and design integration, potential inadequacy of the safety analysis (PISA), technical safety requirements (TSR), and unreviewed safety questions. BJC learned that nuclear safety compliance relies on adequate and well documented system design information. A number of PIS As and TSR violations occurred due to inadequate or erroneous system design information. As a corrective action, BJC assessed the occurrences caused by systems design-safety basis interface problems. Safety systems reviewed included the Molten Salt Reactor Experiment (MSRE) Fluorination System, K-1065 fire alarm system, and the K-25 Radiation Criticality Accident Alarm System. The conclusion was that an inadequate knowledge of system design could result in continuous non-compliance issues relating to nuclear safety. This was especially true with older facilities that lacked current as-built drawings coupled with the loss of 'historical knowledge' as …

This report describes the anatomy of dollar crisis, and possible reasons why a dollar crisis won't occur. The report discusses the macroeconomics effects of a dollar crisis, and the response of economic policy.

Lawrence Livermore National Laboratory (LLNL) and the NNSA Livermore Site Office teamed up to prepare a site specific work smart standard setting requirements for preparation of safety basis documents for LLNL non-nuclear operations and facilities. This standard documents how all hazards (biological, chemical, explosive, industrial, and radiological) shall be evaluated, classified, analyzed, and controls developed. This standard was developed to evaluate hazards at the facility level to mesh with LLNL's ISM system for reviewing hazards at the activity level. This standard presents an approach to establishing safety basis for non-nuclear operations and activities, taking a graded approach based on the potential for impacts to the health of collocated workers and the public. Direct worker safety is covered by LLNL's work activity level reviews and requirements. This standard includes streamlined mechanisms for classifying hazards based upon the unmitigated potential for human health impacts. A review or practices at several private industries, government laboratories, and DOE complex sites provided a benchmark and comparison of safety analysis processes. These approaches were compared with LLNL's existing systems, leading to a determination that facility specific safety basis documents added value to a rapid authorization for new work activities in LLNL facilities. A process for hazard …

None