A study of the neutron optical potential on nuclei near mass-140 was begun to extend the energy range and improve the precision of previous neutron total cross section measurements. The extended energy range of this measurement reveals maxima and minima in the total cross section that are evidence of the nuclear Ramsauer effect. A 100-MeV linear accelerator is used to produce a continuum of neutron energies from a Ta-Be conversion target. A 250-meter flight path is used to measure neutron energies by the time-of-flight method. Transmission data for /sup 140/Ce and transmission ratios for /sup 142/Ce, /sup 141/Pr, and /sup 139/La relative to /sup 140/Ce were obtained. The /sup 140/Ce data have a precision of 1 to 3% and the ratios are obtained with a precision of about 0.3%. To analyze these total cross section data a computer code was developed to calculate the total elastic, reaction, and differential elastic scattering cross sections for a neutron interacting with a nucleus. The interaction is represented by a spherically symmetric complex potential that includes spin-orbit coupling. The parameters of this potential were adjusted to approximate the /sup 140/Ce total cross over the energy range from 2.5 to 60 MeV. The energy dependence …

Weekly report of the Texas Crop and Livestock Reporting Service on turkey poult numbers in Texas and compared with other states. It includes compiled statistics across six consecutive weeks during two years for turkey eggs set and poults hatched.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification; Whether the Department of Banking should approve the release of monies held in a trust account by the trust department of a bank that are in excess of 100% of the amounts paid by purchasers of prepaid funeral benefits to the seller under the provisions of article 548b, V.T.C.S.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Identification of the elements of typical hazardous waste facilities (HFWs) that are the major contributors to the risk are focussed on as the elements which require additional considerations in the design and construction of low-level nuclear waste management repositories and HWFs. From a recent study of six typical HWFs it was determined that the factors that contribute most to the human and environmental risk fall into four basic categories: geologic and seismological conditions at each HWF; engineered structures at each HWF; environmental conditions at each HWF; and nature of the material being released. In selecting and carrying out the six case studies, three groups of hazardous waste facilities were examined: generator industries which treat or temporarily store their own wastes; generator facilities which dispose of their own hazardous wastes on site; and industries in the waste treatment and disposal business. The case studies have a diversity of geologic setting, nearby settlement patterns, and environments. Two sites are above a regional aquifer, two are near a bay important to regional fishing, one is in rural hills, and one is in a desert, although not isolated from nearby towns and a groundwater/surface-water system. From the results developed in the study, it was …

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

To better understand and predict tandem-mirror experiments, we are building a comprehensive Mirror Equilibrium Radial Transport and Heating (MERTH) code. In this paper we first describe our method for developing the code. Then we report our plans for the installation of physics packages for electron- and ion-cyclotron heating of the plasma.

The axial ion plugging potential in a tandem mirror is produced by electron cyclotron resonance heating (ECRH) applied at two locations in the end mirror cell. A second harmonic (..omega.. = 2..omega../sub c/) resonance is used near the midplane to generate hot electrons which yield an electron potential barrier between center cell electrons and electrons outboard of the end cell midplane. The latter group of electrons is then heated at the fundamental resonance (..omega.. = ..omega../sub c/) on the outboard side of the magnetic well which drives an ion confining potential. Fokker-Planck and Monte Carlo calculations show that such a configuration is achievable, and the scaling obeys a rather simple set of equations. Another aspect of this configuration is the experimental observation that the fundamental heating drives the overall potential of the device relative to the wall to approx. 1 kV. An analytic model predicts this behavior for very strong ECRH. Results are given a numerical study of electron confinement in a mirror cell owing to fundamental heating as the level of the rf electric field, E/sub rf/, is increased. For the second part of the paper, we show that moderate levels of uniformly distributed rf fields, called cavity fields, …

Weekly report of the Texas Crop and Livestock Reporting Service on broiler chick numbers in Texas and compared with other states. It includes compiled statistics across six consecutive weeks, from the week ending March 30 to the week ending May 4, during 1984 and 1985 for broiler eggs set, chicks hatched, and chicks placed.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Whether a school district may expend funds to employ crossing guards at intersections which do not abut school district property

The ACP Branchbus, a high speed differential bus for data movement in multiprocessing and data acquisition environments, is described. This bus was designed as the central bus in the ACP multiprocessing system. In its full implementation with 16 branches and a bus switch, it will handle data rates of 160 MByte/sec and allow reliable data transmission over inter rack distances. We also summarize applications of the ACP system in experimental data acquisition, triggering and monitoring, with special attention paid to FASTBUS environments.

This paper describes the success of the ongoing mixed-oxide fuel development program in the United States aimed at qualifying an economical fuel system for liquid metal cooled reactors. This development has been the cornerstone of the US program for the past 20 years and has proceeded in a deliberate and highly disciplined fashion with high emphasis on fuel reliability and operational safety as major features of an economical fuel system. The program progresses from feature testing in EBR-II to qualifying full size components in FFTF under fully prototypic conditions to establish a basis for extending allowable lifetimes. The development program started with the one year (300 EFPD) core, which is the FFTF driver fuel, continued with the demonstration of a two year (600 EFPD) core and is presently evaluating a three year (900 EFPD) fuel system. All three of these systems, consistent with other LMR fuel programs around the world, use fuel pellets gas bonded to a cladding tube that is assembled into a bundle and fitted into a wrapper tube or duct for ease of insertion into a core. The materials of construction progressed from austenitic CW 316 SS to lower swelling austenitic D9 to non swelling ferritic/martensitic HT9. …

A plasma simulation code is used to study the resonant interactions between streaming ions and Alfven waves. The medium which supports the Alfven waves is treated as a single, one-dimensional, ideal MHD fluid, while the ions are treated as kinetic particles. The code is used to study three ion distributions: a cold beam; a monoenergetic shell; and a drifting distribution with a power-law dependence on momentum. These distributions represent: the field-aligned beams upstream of the earth's bow shock; the diffuse ions upstream of the bow shock; and the cosmic ray distribution function near a supernova remnant shock. 92 refs., 31 figs., 12 tabs.

Monthly reports documenting San Antonio municipal board activities and city permitting for April 1987.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification; Designation of agent ,broker or company for Optional Retirement Investments or annuities.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A detailed description of the background, technology and application for the development of a coal-fired pulse combustor for residential space heating was provided in the first quarterly report for the period October 1986 - December 1986, That material is omitted from this report. In May of 1988, DOE Contract No. DE-AC22-86PC90278 was modified with the addition of two new Tasks - 1.6 and 13 - as a Phase IA to bridge the gap between Phase I and II of the program. The descriptions of these tasks are now included in Section 1.1. Testing activities during this period were minimal with all effort focused upon resolving the issues associated with the extremely low slurry feed rates required for the unit. The use of a constant pressure slurry feed system followed by a low head peristaltic pump was successful for short periods of time providing the required slurry atomization but exceeded pump design specifications leading to rupture of the peristaltic tube. An attempt was made to locate a commercial pump with the required duty; delivering 1 to 2 gallons per hour at up to 100 psi but could not be located. Design modifications for the peristaltic pump were therefore initiated to meet …

The storage ring quadrupoles, sextupoles, and correction magnets will be mounted on a common girder approximately 4.0 m long. The rigid girder, in turn, is mounted on three five-ton jacks, each of which is mounted on a pedestal that is grouted and bolted to the floor. For this preliminary analysis, we will assume that the girder has a weight per unit length of 100 lb/ft and a bending stiffness that is significantly greater than the vertical stiffness provided by the pedestal (jack-screw) supports. This allows us to approximate the magnet/support system as a rigid beam (girder) on spring supports (jack-screws) carrying distributed masses (magnets). These approximations permit us to study the rigid body translational and rotational (rocking) modes of the system. It should be noted that the preliminary design has two jack-screw supports at the left end and one at the right end. It should be noted that the magnet/support system studied is only a conceptual design. In actuality, there are five different magnet/support configurations comprising each of the 40 sectors of the storage ring. Also, it is expected that the details of the final design, in particular with respect to the positioning of the pedestal supports, will somewhat different. …

The storage ring quadrupoles, sextupoles, and correction magnets will be mounted on a common girder approximately 4.0 m long. The rigid girder, in turn, is mounted on three five-ton jacks, each of which is mounted on a pedestal that is grouted and bolted to the floor. For this preliminary analysis, we will assume that the girder has a weight per unit length of 100 lb/ft and a bending stiffness that is significantly greater than the vertical stiffness provided by the pedestal (jack-screw) supports. This allows us to approximate the magnet/support system as a rigid beam (girder) on spring supports (jack-screws) carrying distributed masses (magnets). These approximations permit us to study the rigid body translational and rotational (rocking) modes of the system. It should be noted that the preliminary design has two jack-screw supports at the left end and one at the right end. It should be noted that the magnet/support system studied is only a conceptual design. In actuality, there are five different magnet/support configurations comprising each of the 40 sectors of the storage ring. Also, it is expected that the details of the final design, in particular with respect to the positioning of the pedestal supports, will somewhat different. …

A reevaluation of U.S. trade policy towards Japan and how we negotiate our trade difficulties is now taking place in the Congress, the executive branch, academia, and the business community. From the various reviews are emerging critiques and proposals for new policy approaches.