The present study was motivated by an attempt to understand low energy [formula] scattering within the framework of the bootstrap principle and the un-Reggeized version of the strip approximation. This work attempts to generate low energy [formula] scattering in the p(1,1) and p(3,3) states assuming the potential operating in these states is generated by the exchange of low mass meson states in the crossed t-channel and low mass baryon states in the crossed u channel. In particular, the p-meson is kept in channel t; the p mass and the coupling of [formula] and [formula] appear as parameters. The parameters of the nucleon and (3,3) poles are taken as the elements to be determined by self-consistency.

Investigation of aqueous and steam corrosion at elevated temperature has been carried on at Hanford for several tears. A number of reports have been published on various phases of the corrosion program but, except for monthly reports, little has been written on the progress of the Corrosion and Coatings Operation alloy development program. This interim report will outline the more important current phases of the aluminum alloy program.

Summary. The analysis of the motion of a six-bar linkage is difficult because of the large number of variables involved and the large number of calculations that have to be made for each position of the linkage. If a digital computer is used to make the calculations required for a multi-position analysis of a mechanism, it is feasible to design by analyzing a large numbers of similar linkages and selecting the optimum configuration. In this paper expressions have been derived for the output angle as a function of the input angle and the transmission angle as a function of the input angle for any single-degree-of-freedom six-bar linkage for which the parameters are known An example showing the usefulness of a six-bar computer program as a mechanism design tool is discussed.

Previously reported results on the testing of small samples of boron carbide dispersed in nickel by electrolytic codeposition were adequately encouraging to lead to the development of a prototype control rod for operation in the Vallecitos Boiling Water Reactor. The operation of the control rod has been entirely satisfactory.

Abstract: Progress is reported on research and development tasks under the Program Plan for Engineering Support and Development of Army Pressurized Water Reactor Power Plants, Contract AT(30-1)-2639, during the six months' period October 1, 1061 to March 31, 1962.

Introduction. High voltage silicon mass transistors have the ability to perform circuit functions similar to the gas thyratron tube. Upon being triggered the transistor junction breaks down, or "avalanches", and can conduct a large current for a short time. The rise time of the avalanche breakdown pulse can be short, and the delay between triggering and avalanching can be short and very consistent. This avalanche action is non-destructive if the amount of peak and average power being dissipated at the junction is limited by the circuitry.

Technique used in deriving values of the linac ball tuner settings to produce various fields is discussed briefly, and tables showing ball tuner change numbers and values used in making up the ball tuner change numbers are given.

Technical report on the activities of the Oak Ridge National Laboratory Biology Division for the report period including a list of 346 publication and lectures and 205 short articles by members of the division on their research and activities.

This report contains a listing of the bound-proton kernels for neutron scattering which were calculated in conjunction with the USAEC Control Rod Materials Program.

Abstract: An easy to use method for evaluating Bessel functions is given. This method is applicable to the one-dimensional, 2-group, 2-region diffusion problem, and is designed primarily for use on a small or medium sized digital computer. ...FORTRAN programs based on this method are presented together with the output obtained from an IBM-1620 digital computer.

A carrier-free separation of hafnium from several hundred milligrams of rare earth oxides by anion exchange from saturated HC1 solution is given. The procedure is completed in 4-8 hours and is suitable for remote control work.

Abstract: Distribution coefficients have been measured for the partition of metal ions between cation exchange resin and acetone-water-hydrochloric acid solutions. the differences in distribution coefficients of metal ions are greater in acetone-water media than in aqueous media of the same hydrochloric acid concentration. Using distribution coefficient data, conditions for column separations of mixtures can be selected. Column separations of metal ion mixtures can be effected by eluting with acetone-water-hydrochloric acid solutions of different compositions. Successful separations of a number of mixtures are reported.

From Introduction : "This analysis partitions the electron density and the electronic pair density of the molecule into components corresponding promoted atomic states, to quasiclassical coulombic interactions of these promoted states, and to interactions resulting from the sharing of electrons between atoms."

Abstract: The acid hydrolysis of [Pt(NH3)3Cl] has been shown to occur to a measurable extent. for this reaction: [APt(NH3)cCl]+ + H2O [chemical equilibrium symbol with rate constant k-1 above and k1 below] [Pt(NH3)c(H2O)]++ + Cl-, the equilibrium quotient was measured at 25 degree C and 35 degree C. At 25 degree C this quotient was 8.4 x 10-5 at [Mu] (ionic strength) = 0 and 25 x 10-5 at [mu] = .318 M. This variation is consistent with the expected changes in activity coefficients. [Delta]H for the reaction was found to be approximately 0. The rate constant, k1 was 2.3 x 10-5 sec.-1 at 25 degree C and it was nearly independent of ionic strength. The acid hydrolysis provides a mechanism for the exchange of the chloride ligand and Cl-. Exchange experiments with Cl36 showed that in addition to the acid hydrolysis, a process, first order in both, [Pt(NH3)3Cl] and Cl- with a rate constant of 6. 10-5 sec.-1M.-1 contributes to the exchange. The behavior of the entire series of chloro-ammines of platinum(II) toward acid hydrolysis and chloride exchange has been summarized, and a likely mechanism for the process has been discussed.

"Graft polymers were made by Co60 mutual irradiation of mixtures of styrene and methyl acrylate in contact Teflon. These graft copolymers were analyzed by infra-red absorption and their composition determined. The composition of the graft copolymer formed from styrene and methyl acrylate was different from that which is predicted by the copolymer composition equation."

Over the past 13 years a considerable body of data on explosive cratering has been developed for application to nuclear excavation projects. These data were obtained from some ten cratering programs using chemical explosives (TNT or nitromethane) and seven nuclear cratering detonations. The types of media studied have ranged from marine muck to hard, dry basalt, although most effort has been devoted to craters in NTS desert alluvium and basalt. Considerable effort has also been devoted to the study with chemical explosives of the use of linear explosives and rows of point charges. This paper is intended to be a summary of these data and a statement of the understanding which has been developed from them.

The crystal structures of the normal fatty acids of low molecular weight have been rather neglected until recently. Formic acid and acetic acid occur in the solid as hydrogen-bonded linear polymers, while several acids with eleven or more carbon atoms per molecule exist in the solid as dimers. The melting points of these acids, when plotted against number of carbon atoms, fall on two rather similar curves for even and odd numbers of carbon atoms, respectively, each with a minimum near five carbon atoms. These facts and hope of explaining the melting-point behavior led us to examine the structures of propionic and butyric acid crystals. These crystals have different structures, but both contain dimers.

A crystallographic study of the transition element beryllides was undertaken in support of phase diagram work. These beryllides are very high melting, and the use of ordinary methods make it difficult to determine stoichiometry. We have succeeded in establishing the compositions and complete crystal structure description of all of the room temperature stable or metastable compounds of the beryllides of niobium, tantalum, titanium zirconium, hafnium, vanadium, chromium and molybdenum. Since some of the structures found were not previously reported, complete structure determinations had to be done.

"This bibliography lists selected books, articles, and unclassified reports which have appeared in the following abstracts and indexes between August 1959 and December 1960."

"A method and equipment are described for determining the surface parameters of contact required for heat transfer calculations. In this method, the output of a surface analyzer for one surface is recorded on one channel of magnetic tape and the output for the other surface of the contact pair on a second channel. The tape is played back to an analog computer which then integrates the analog voltage to compute the void volume thickness, the number of contact points, and the ratio of metallic contact area to the total area."

This report describes the design procedure for a reflectometer or directional coupler to replace the probe part of the D07-1020 assembly used at the Brookhaven Alternating Gradient Synchrotron linac. Mathematical treatment and diagrams of various reflectometers are included.

Sanderson & Porter have carried out a series of studies over the last four years which indicate that the pebble-bed reactor way be an attractive way to obtain low-cost power. At the request of the Atomic Energy Commission, two design studies have been carried out on this concept at the Oak Ridge National Laboratory. The first of these a preliminary design of a 10-Mw(t) reactor experiment, the PRRE, was initiated September 10, and a report on the study was issued November 1960. The second phase of the work, a conceptual design study of a 330-Mw (e) central station, was initiated November 1, and is the subject of this report.

"The laboratory experiments and field testing which were carried out in the development of a homogeneous gas labeling device are described. Detailed drawings of the injector and its most critical components are included. Recommendations are made for a production model of the device along with estimated costs of construction."

Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The experimental work centers around aspects of detecting neutrons in the presence of 10/sup 7/ r/hr gamma fields. Boric acid experiments and Humboldt Bay experiments are reported.