The present study was motivated by an attempt to understand low energy [formula] scattering within the framework of the bootstrap principle and the un-Reggeized version of the strip approximation. This work attempts to generate low energy [formula] scattering in the p(1,1) and p(3,3) states assuming the potential operating in these states is generated by the exchange of low mass meson states in the crossed t-channel and low mass baryon states in the crossed u channel. In particular, the p-meson is kept in channel t; the p mass and the coupling of [formula] and [formula] appear as parameters. The parameters of the nucleon and (3,3) poles are taken as the elements to be determined by self-consistency.

The purpose of this report is to present the information obtained relative to the characteristic adsorption of radioisotopes in a long (forty feet) laboratory soil column treated with a high salt, process waste of high activity density. The movement of adsorbed cations in a soil column subjected to prolonged leeching by water also was determined.

The following document focuses on the study of the absorption spectra of americium chloride. Large samples and a spectrograph of great dispersion were used.

"The phase and amplitude functions describing the betatron oscillations in the synchrotron are calculated using the revised parameters of the Cambridge Electron Accelerator. The results are given numerically and plotted in a graph for one machine period."

This quarterly progress discusses the ongoing work at the Oak Ridge National Laboratory for the quarter ending in March 10, 1952. Topics discussed include reactor theory and design, shielding research, materials research, and includes appendixes with supplemental information.

Summary: "A corrosion test of aluminum components in a 4-ft. section of a fuel tube has been tested under conditions simulating plant geometry and, as nearly as possible, the operating conditions of water purity, temperature, and flow rate. Results: 1. None of the aluminum components, 63S fuel tube, 2S solid fillers and 43S spacers showed any corrosion effects beyond normal oxide film formation. This was carried out in flowing water, maintained at a specific resistivity greater than 1 x 10(6) ohm-cm, for four weeks. 2. No corrosion pitting was observed on any of the aluminum surfaces; all became covered with a uniform film of Al2O3.H2O. On the boat tails, where type 304 stainless steel fins were in galvanic contact with 2S aluminum, no pitting or preferential attack occurred."

Investigation of aqueous and steam corrosion at elevated temperature has been carried on at Hanford for several tears. A number of reports have been published on various phases of the corrosion program but, except for monthly reports, little has been written on the progress of the Corrosion and Coatings Operation alloy development program. This interim report will outline the more important current phases of the aluminum alloy program.

Commonwealth Edison Company for the purpose of supplementing the license application for the Dresden Nuclear Power Station submits herewith Amendment No.1 to the portion of the Final Hazards Summary Report entitled Preliminary Hazards Summary Report.

Abstract. to estimate the oxygen picked up by thorium in casting a rapid method of running the acid insoluble content was developed. the quickest procedure consists of reacting with mixed acids, fuming with perchloric and filtration to separate the "free" thorium from the "combined". The precipitate is ignited and weighed as thorium dioxide.

Introduction: This report is principally concerned with analysis of measurements taken on the APPR-1 core during the course of the extended Zero Power Experiments (ZPE-2). The bulk of these measurements are reported in APAE No. 21. There are some additional measurements reported in APAE Memo 115. In addition to the analysis of the ZPE-2 data some re-evaluation has been made of a few of the results obtained from the first set of Zero Power Experiments (ZPE-1). The ZPE-1 measurements are reported in APAE No. 8. During the course of analysis work it became apparent that a considerable amount of basic experimental data had been taken on the APPR-1 core. It seemed worthwhile to organize this report in such a fashion that other investigators could make maximum use of this data. It provides excellent opportunity for individuals and groups interested in basic reactor reactor analysis problems to check calculational techniques. An attempt has been made to include all of the fundamental information concerning the material content and geometry of the APPR-1. This material is in included in the Appendices. In addition, cross-section files and group constants have been listed rather extensively in order that other investigators could compare results presented in …

Technical report discussing that the deuterium concentration of heavy water can be determined by equilibrating the water with deuterium gas in the presence of a catalyst with subsequent analysis of the equilibrated gas on the mas spectrometer. The apparatus for equilibration analyses maybe be considered in three parts: 1) apparatus for introducing the ingredients into the reaction chambers; 2) the reaction chambers; 3) the mass spectrometer for analysis of the equilibrated gas. The isotopic composition of the deuterium gas to be used as the starting material is primarily governed by what gases are available. In general it is best to use gas within about one percent on either side of the final equilibrium composition. No reaction takes place between deuterium gas and water molecules in the absence of a catalyst. Platinum oxide is used as the catalyst.

When water is used as a coolant in any heat-producing process, the purity of the cooling water is of considerable importance, both from the standpoint of build-up of deposited solids inside the cooling tubes, and as an indication of corrosion of the tubes or any other materials with which the water comes in contact. The first problem has long been recognized, and is generally solved by pretreatment of the water. Efficient treatment can reduce the total solids content to less than 0.1 ppm, and the concentration of individual elements to the order of 0.01 ppm. If water of this purity is used, the analysis of the input and output stresses can result in some useful information. The input stream analysis, of course, is direct measure of the quality of the original cooling water, and frequent analysis by a reasonably fast method can be used to keep pretreatment under control. But of even greater significance is the difference in the impurity content of input and output streams. In a simple, straight-through system the difference generally will be negligible. If a closed, recirculating system is considered, however, with the coolant water circulating through the process to be cooled and then through a …

The following report discusses findings resulting from experiments on recycled carbon tetrachloride at various stages of the proposed purification process.

Summary. The analysis of the motion of a six-bar linkage is difficult because of the large number of variables involved and the large number of calculations that have to be made for each position of the linkage. If a digital computer is used to make the calculations required for a multi-position analysis of a mechanism, it is feasible to design by analyzing a large numbers of similar linkages and selecting the optimum configuration. In this paper expressions have been derived for the output angle as a function of the input angle and the transmission angle as a function of the input angle for any single-degree-of-freedom six-bar linkage for which the parameters are known An example showing the usefulness of a six-bar computer program as a mechanism design tool is discussed.

The development of ionic methods for the determination of corrosion products in the highly radioactive Homogeneous Reactor (HR) fuels has been of major interest in the work of the Ionic Analyses Laboratory. Methods for the spectrophotometric determination of aluminum and for the polarographic determination of iron in HR fuels have been developed. The polarographic determination of molybdenum in uranyl sulfate solutions was studied. A polarographic method for the determination of zinc was developed. A fluorometric method for the determination of microgram amounts of fluoride was studied. Three organic reagents were investigated as precipitants for microgram quantities of zirconium in HR fuel. The automatic photometric titration technique was applied to the determination of thorium and of sulfate. A method was developed for the ionexchange separation and potentiometric titration of cobalt. The ultraviolet absorption spectra of technetium and rhenium were studied.

A new gas-liquid countercurrent system (the ANCO system from Anisole-Complex) for the enrichment of boron isotopes has been developed. It is believed that use of this systems will result in a considerably lower unit cost for enriched boron-10 than was previously possible. The system utilizes the exchange reaction between BF3 (gas) and BF3·anisole (liquid) to concentrate boron-10 in the liquid phase. The single stage isotopic separation factor for this system has been found to vary from 1.039 at 0°C to 1.029 at 30°C. The isotopic exchange reaction has been shown to be rapid. Vapor pressures of the complex as a function of temperature have been measured and the heat of formation of the complex determined. Laboratory experiments show that quantitative removal of the BF3 from the complex can be accomplished by heating. A complete miniature ANCO plant was constructed and operated in the laboratory to test the feasibility of the system. The system was found to operate efficiently with a minimum of attention, and to enrich the isotopes of boron as expected. Based upon the experience obtained with the laboratory ANCO unit, a pilot plant large enough to utilize a 6-inch diameter exchange column was designed. The design calculations of …

The angular distribution of fission fragments from the neutron-induced fission of several isotopes has been studied. Distributions were observed for thermal neutrons on U233 and U235, Lady Godiva leakage neutrons on U235 and U238, and 14 Mev neutrons on U233, U235, U238, Th232, and Np237. No anisotropy was observed for thermal neutron fission, whereas for Lady Godiva neutrons and 14 Mev neutrons the probability of fission along the axis of the neutron beam was determined to be higher than for fission in the orthogonal direction. Experimental results are given on pages 10 and ll.

Previously reported results on the testing of small samples of boron carbide dispersed in nickel by electrolytic codeposition were adequately encouraging to lead to the development of a prototype control rod for operation in the Vallecitos Boiling Water Reactor. The operation of the control rod has been entirely satisfactory.

This report describes corrosion rate of uranium in hydrogen-saturated water appears to be constant with respect to time after a brief induction period and to involve only one type of over-all reaction, in which pitting effects are slight or nonexistent.

Abstract: Progress is reported on research and development tasks under the Program Plan for Engineering Support and Development of Army Pressurized Water Reactor Power Plants, Contract AT(30-1)-2639, during the six months' period October 1, 1061 to March 31, 1962.

In early July, 1958, it appeared that Columbia River temperature at HAPO would be near 24.5ºC by the end of August. River temperature were averaging 4º to 5º above 1957 figures and were 3º to 4º above the ten year highs. It seemed desirable to examine the problem to determine if any corrective measure could be taken, since it was apparent that production losses were imminent.

Introduction. High voltage silicon mass transistors have the ability to perform circuit functions similar to the gas thyratron tube. Upon being triggered the transistor junction breaks down, or "avalanches", and can conduct a large current for a short time. The rise time of the avalanche breakdown pulse can be short, and the delay between triggering and avalanching can be short and very consistent. This avalanche action is non-destructive if the amount of peak and average power being dissipated at the junction is limited by the circuitry.

Technique used in deriving values of the linac ball tuner settings to produce various fields is discussed briefly, and tables showing ball tuner change numbers and values used in making up the ball tuner change numbers are given.

Abstract: This is basically a counting rate meter, with an alarm circuit, operating from four GM tubes as the detecting elements. The Hand Counter comprises four logarithmic counting rate meters working from four GM tubes mounted individually, with associated electronic circuits, in suitable shields with a metal mesh type of window. Both sides of both hands are sampled simultaneously. In the Foot Counter, two GM tubes are separately and mounted in a suitable mesh window shielded with the electronic circuit; the foot counter uses only two counting rate meters, and both feet are sampled simultaneously. Each circuit is built in two parts; two tubes are in the shield and the balance of the circuit is in the electronic unit which is a standard 17" x 13" chassis. Circuit diagrams are included.