Redux is a thermosetting synthetic resin manufactured by the Resinous Products & Chemical Co., Washington Square, Philadelphia 5, Pa. According to the manufacturer, it is intended for bonding metal to metal and metal to wood. It was apparently intended to replace rivets in aircraft structural parts and recent information indicates that a British airplane, the DeHaviland Dove, is in production using this resin. The adhesive was originally developed in England by Aero research Ltd. Experience at this laboratory has been confined to use of the resin for bonding electrical grade silicon steel laminations. Very strong bonds have been obtained under properly controlled conditions. The bond strength is sufficient to tear 29 gauge (.014") steel when attempting to peel off individual laminations. The bond is sufficiently homogeneous to prevent leaks parallel to the plane of the laminations into a high vacuum system. Experiments at the laboratory have been designed to test the adhesive for use in bonding the laminations which form the pole tips and vacuum chamber lids for the synchrontron magnet.

Abstract: The yields of U²³⁷ and a fission product were measured as a function of maximum betatron energy, The ratio of the number of fissions divided by the number of U²³⁷ atoms increases with increasing maximum betatron energy. This is consistent with the picture that the higher-energy gammas leave the U²³⁷ atoms with enough excitation energy (above photofission and photoneutron thresholds) to also decay by fission or neutron emission. This secondary process increases the number of fissions and decreases the U²³⁷ yield, this increasing the above ratio.

New systems involving the exchange of boron between boron trifluoride and boron trifluoride addition compounds have been explored. These systems have large separation factors and potentially simple reflux mechanisms. A precise determination of this separation factor for the anisole-boron trifluoride system gave the value (see report). Boron exchange was found to occur between BF and BCl3. Several homogenous catalysts have been found which activate the hydrogen-water exchange, but none are adoptable to the production of deuterium because of the slow exchange rate. Platinum or platinum oxide may be usable as a heterogeneous catalyst with proper support or dispersion techniques. The high-pressure solubility of hydrogen in several amalgams was investigated in connection with a unique countercurrent exchange system. A proposed system involving isotopic exchange between lithium dipivaloylmethane in diethyl ether and lithium hydroxide in aqueous solution was shown to give little or no isotopic separation. Column studies of the carbonate system exchange reaction were concluded with a 40°C run. Slightly higher enrichment of N15 was obtained than at 30°C . The temperature dependence of all in this system was measured between 15 and 45°C. The factor increases with temperature, showing a tendency toward a maximum near 45°C. Isotopic exchange appears to …

Metallographic examination of an irradiated powder metal uranium slug from PT-313-105-4M⁽¹⁾ was undertaken primarily as an evaluation of recently remotized metallographic equipment. It was, also, proposed to compare the grain size with values obtained ultrasonically on the same slug. It was further proposed to make a comparison, so far as limited data permitted, of post-irradiated powder metal uranium grain size with that to be expected from normal uranium similarly irradiated.

Abstract: "The shock-tube experiments of Professor R. G. Fowler and his co-workers at the University of Oklahoma, and of Professor Arthur Kantrowits and his group at Cornell University, are reported by the author, who visited the laboratories of the two groups. Fowler's group has studied expanding low-pressure sparks; Kantrowits and his group have studied shocks produced by the adiabatic expansion of a compressed gas."

Stress corrosion was found in 8 components of the HRT mockup; only of four of these actually shut down the loop. All of the failures have occurred in the high-pressure system of the loop.

"This bibliography is a list of references pertaining to factors affecting the motion of the artificial earth satellite. References are foreign and domestic literature."

An empirical approach for the evaluation of shielding materials for macrochemical manipulations of spontaneously fissioning heavy elements (curium and californium) has revealed interesting comparisons. High-density metal halide solutions were compared with lead glass and with rare earth glass for use as shielding windows. Laminated shields of lead-paraffin and uranium-paraffin were compared with water and with paraffin for shielding walls.

Nuclear and radiation hazards have been investigated for all phases of operation to be carried out in the mechanical decladding of SRE fuel elements. The SRE fuel is 2.8% enriched with a maximum burnup of 1,000 Mvd/ton and minimum cooling of 120 days. Each element contains 9 kg of uranium metal (~2 kg U-235) and is made up from 84 slugs (3/4"D x 6'"), clad with (10 mil wall) stainless steel tubing. It is planned to ship the fuel from Santa Susana, California, to Oak Ridge in the modified PAR loop carriers, with a maximum of 10 elements being shipped in each carrier per trip.

The Interim Power Fuels Reprocessing Program, as established by the Atomic Energy Commission, provides the service of recovering uranium, thorium, plutonium, etc., from irradiated fuels discharged from non-production reactors of both public and private ownership. To provide this service on an interim basis and at minimum capital investment, the Commission has assigned the processing responsibility for the various fuel types to several AEC sites. The sites are to be assigned fuel types most similar to their normal production. As a result, HAPO has been assigned the responsibility for processing the low enrichment uranium and uranium oxide type fuels with isotopic content up to 5% uranium-235. In addition, some plutonium base fuels will be processed at Hanford.

This report presents the description and safeguard evaluation of an open pool research and test reactor rated at one megawatt. The reactor is being proposed by the General Electric Company to the Rhode Island and Providence Plantation Atomic Energy Commission.

Unclassified experimental data concerned with the oxidation characteristics of Nb and Nb-base alloys are presented. The bulk of the results is presented in tabular form and cataloged under laboratory name sub-headings. The theory of alloy development for oxidation resistance is discussed. Methods of evaluating oxidation behavior are outlined.

Summary. The analysis of the motion of a six-bar linkage is difficult because of the large number of variables involved and the large number of calculations that have to be made for each position of the linkage. If a digital computer is used to make the calculations required for a multi-position analysis of a mechanism, it is feasible to design by analyzing a large numbers of similar linkages and selecting the optimum configuration. In this paper expressions have been derived for the output angle as a function of the input angle and the transmission angle as a function of the input angle for any single-degree-of-freedom six-bar linkage for which the parameters are known An example showing the usefulness of a six-bar computer program as a mechanism design tool is discussed.

The evaluation of the inductance of an electrical component is often important in understanding and operating an electrical circuit. Inductance is defined by several equations, the most common being e= -L d1/dt . This equation defines inductance as the constant which relates the back emf produced in an element to the time-rate-of-change of current.

The problem of the reduction of an arbitrary truth function to the minimal union of basic cells is discussed. The solution to this problem has applications to pattern recognition and logical circuit design. An algorithm is presented that solves the problem and generates the class of minimal unions. It partitions an arbitrary truth function into a well-defined set of subfunctions (components) in such a way that the partition is invariant under all transformations that preserve the topology of the original truth function.