The purpose of this report is to present the information obtained relative to the characteristic adsorption of radioisotopes in a long (forty feet) laboratory soil column treated with a high salt, process waste of high activity density. The movement of adsorbed cations in a soil column subjected to prolonged leeching by water also was determined.

Memorandum presenting tests at two supersonic speeds to obtain experimentally the aerodynamic damping characteristics of a control surface on a two-dimensional wing. The control surface had a chord of 1.67 inches and a span of 7.25 inches and was supplied in three materials with different mass, inertia, and stiffness properties. Results regarding the presentation of data and comparison with theory and comparison with control-surface data for a triangular wing are provided.

A new gas-liquid countercurrent system (the ANCO system from Anisole-Complex) for the enrichment of boron isotopes has been developed. It is believed that use of this systems will result in a considerably lower unit cost for enriched boron-10 than was previously possible. The system utilizes the exchange reaction between BF3 (gas) and BF3·anisole (liquid) to concentrate boron-10 in the liquid phase. The single stage isotopic separation factor for this system has been found to vary from 1.039 at 0°C to 1.029 at 30°C. The isotopic exchange reaction has been shown to be rapid. Vapor pressures of the complex as a function of temperature have been measured and the heat of formation of the complex determined. Laboratory experiments show that quantitative removal of the BF3 from the complex can be accomplished by heating. A complete miniature ANCO plant was constructed and operated in the laboratory to test the feasibility of the system. The system was found to operate efficiently with a minimum of attention, and to enrich the isotopes of boron as expected. Based upon the experience obtained with the laboratory ANCO unit, a pilot plant large enough to utilize a 6-inch diameter exchange column was designed. The design calculations of …

From objective: "The objective of this work was to design, develop, assemble, and test and automatic analyzing monitor for recording the prominent isotopes in reactor effluent cooling water."

"This bibliography is a compilation of titles to unclassified reports, journal articles and conference papers written by members of the University of California Radiation Laboratory, Livermore and Berkeley, relating to Project Sherwood (Controlled Thermonuclear Reactions) from 1953 through 1957."

Progress is reported on (1) direct cycle boiling reactor studies, (2) solvent extraction, (3) fluoride volatilization separation process, (4) elevated temperature separations, (5) fluidization studies, (6) development of analytical techniques, (7) processing and utilization of radioactive wastes.

Report that "summarizes the costs, experience and results of contracts AT(10-1)-1054 and AT(10-1)-1122 for drilling, casing and cementing observation wells at the National Reactor Testing Station, Idaho" (p. [11]).

Report presenting an investigation in the altitude wind tunnel to determine the performance of the Python turbine-propeller engine. Compressor-performance data were obtained for a range of simulated altitudes at a single cowl-inlet ram pressure ratio while the engine was run over its full operable range of engine speeds. Results regarding the deterioration of compressor performance, compressor performance, including efficiency and performance maps, and velocity and static-pressure profiles are provided.

"A theoretical analysis of the cross-sectional temperature distribution of a water-cooled turbine blade was made using the relaxation method to solve the differential equation derived from the analysis. The analysis was applied to specific turbine blade and the studies icluded investigations of the accuracy of simple methods to determine the temperature distribution along the mean line of the rear part of the blade, of the possible effect of varying the perimetric distribution of the hot gas-to -metal heat transfer coefficient, and of the effect of changing the thermal conductivity of the blade metal for a constant cross sectional area blade with two quarter inch diameter coolant passages" (p. 1).

"This bibliography lists selected books, articles, and unclassified reports which have appeared in the following abstracts and indexes between August 1959 and December 1960."

Originally issued as S and P 1963A, Parts I and II. This report covers a design and feasibility study of a pebble bed reactor-steam power plant of 125 megawatt electrical output. The reactor design which evolved from this study is a two-region thermal breeder, operating on the uranium-thorium cycle, in which all core structural materials are graphite. Fuel is in the form of unclad spherical elements of graphite, containing fissile and fertile material. The primary loop consists of the reactor plus three steam generators and blowers in parallel. Plant design and system analysis including cost analysis and capital cost summary are given.

Introduction: Recently a new type of charged particle detector, the so-called spark chamber, has been developed. The detector has certain advantages in high energy physics over bubble chambers aside from its much lower cost.

Study of the effects on Zircaloy-2 radiation corrosion of a high concentration of excess H2SO4 in a uranyl sulfate test solution using an in-pile loop experiment.

"The laboratory experiments and field testing which were carried out in the development of a homogeneous gas labeling device are described. Detailed drawings of the injector and its most critical components are included. Recommendations are made for a production model of the device along with estimated costs of construction."

The development of methods which were successful in producing zirconium Hanford type process tubing by roll forming and inert are welding (He) flat strip to which appropriate rails had ben previously attached by resistance welding is described in this report. Grade 2 drip arc melted crystal bar material was used.

Objective: "The laboratory equilibrium study RC-E-1 described in this report was carried out to obtain uranium equilibrium curves at various concentrations of nitric acid and of TBP."

To better understand the solvent extraction process much effort has been and is being expended at ORNL and elsewhere to measure reaction kinetics of the extraction reactions. To date these efforts have been largely unsuccessful, due to the attempt to apply homogeneous reaction kinetics to two-phase systems. An optical method has been devised for analyzing the concentration profile in the vicinity of a quiescent interface during steady-state diffusion at rather large molecular fluxes. The system under study is the extraction of uranyl ion from water by a TBP solution. Considerable effort has been directed to eliminating leaks in the diffusion cell and testing the optical system/

In order to make rational predictions of the operating characteristics of uranium anion exchange contactors, an understanding of the mechanism and kinetics of the exchange is necessary. Toward this objective an effort is being made to determine the equilibrium sorption isotherms and rates of sorption of uranium on the anion exchange resin Dovex 21K.

In order to make rational predictions of the operating characteristics of uranium anion exchange contactors, an understanding of the mechanism and kinetics of the exchange is necessary. Toward this objective an effort is being made to determine the equilibrium sorption isotherms and rates of sorption of uranium on the anion exchange resin Dovex 21K.

Abstract: "An experimental study was made to determine the effective shielding provided by a modern reinforced-concrete office building (AEC Headquarters building) from nuclear fallout. Pocket ionization chambers were used for measurement of the radiation-field strength. Fallout was simulated with distributed and point-source configurations of Co-60 and Ir-192 sources. Four typical sections were selected for study, and experiments were performed on each. These included an external wing with exposed basement walls and an external wing with a buried basement. Roof studies were made on an internal wing with a full basement and on the east end of wing A, which has a thin-roof construction. The thick-roof construction of 8 in. of concrete and 2 in. of rigid insulation covers all the building except the east end of wing A, which has 4 in. of concrete and 2 in. of insulation."

"An experimental investigation of rectangular exhaust-gas ejector pumps was conducted to provide data that would serve as a guide to the design of ejector applications for aircraft engines with marginal cooling. The pumping characteristics of rectangular ejectors actuated by the exhaust of a single-cylinder aircraft engine were determined for a range of ejector mixing-section area from 20 to 50 square inches, over-all length from 12 to 42 inches, aspect ratio from 1 to 5, diffusing exit area from 20 to 81 square inches, and exhaust-nozzle aspect ratio from 1 to 42" (p. 161).

From introduction: "This report is concerned with exploratory experiments designed to studies the efficiency of a number of scavengers for zirconium and niobium adsorption and to provide preliminary information on the best conditions to employ on the most satisfactory of those scavengers studied, namely Super Filtrol FO. The data in this report include data obtained through October, 1949, and are by no means considered to be final. The investigation is currently being actively continued."

Technical report describing the Brookhaven National Laboratory nuclear reactor and the physical studies of heat transfer and efficiency conducted to improve nuclear reactor operations.

"This investigation describes a visual method for making stroboscopic observations, through a large number of small windows, of the spread of flame throughout the combustion chamber of a gasoline engine. Data, secured by this method on a small engine burning gaseous fuels, are given to show the effects of mixture ratio, spark advance, engine speed, charge density, degree of dilution, compression ratio, and fuel composition on flame movement in the cylinder. Partial indicator diagrams showing pressure development during the combustion period are included" (p. 697).