In this paper, we present a construction of the compact form of the exceptional Lie group F4 by exponentiating the corresponding Lie algebra f4. We realize F4 as the automorphisms group of the exceptional Jordan algebra, whose elements are 3 x 3 Hermitian matrices with octonionic entries. We use a parametrization which generalizes the Euler angles for SU(2) and is based on the fibration of F4 via a Spin(9) subgroup as a fiber. This technique allows us to determine an explicit expression for the Haar invariant measure on the F4 group manifold. Apart from shedding light on the structure of F4 and its coset manifold OP2 = F4/Spin(9), the octonionic projective plane, these results are a prerequisite for the study of E6, of which F4 is a (maximal) subgroup.

A year of data from sonic anemometer and mechanical wind sensors was analyzed and compared at a low-wind site. Results indicate that 15-minute average and peak 1-second wind speeds (u) from the sonic agree well with data derived from a co-located cup anemometer over a wide range of speeds. Wind direction data derived from the sonic also agree closely with those from a wind vane except for very low wind speeds. Values of standard deviation of longitudinal wind speed ({sigma}{sub u}) and wind direction fluctuations ({delta}{sub {theta}}) from the sonic and mechanical sensors agree well for times with u > 2 ms{sup -1} but show significant differences with lower u values. The most significant differences are associated with the standard deviation of vertical wind fluctuations ({sigma}{sub w}): the co-located vertical propeller anemometer yields values increasingly less than those measured by the sonic anemometer as u decreases from 2.5 approaching 0 ms{sup -1}. The combination of u over-estimation and under-estimation of {sigma}{sub w} from the mechanical sensors at low wind speeds causes considerable under-estimation of the standard deviation of vertical wind angle fluctuations ({sigma}{sub {phi}}), an indicator of vertical dispersion. Calculations of {sigma}{sub {phi}} from sonic anemometer measurements are typically 5{sup …

The historical trend of increasing single CPU performancehas given way to roadmap of increasing core count. The challenge ofeffectively utilizing these multi-core chips is just starting to beexplored by vendors and application developers alike. In this study, wepresent some performance measurements of several complete scientificapplications on single and dual core Cray XT3 and XT4 systems with a viewto characterizing the effects of switching to multi-core chips. Weconsider effects within a node by using applications run at lowconcurrencies, and also effects on node-interconnect interaction usinghigher concurrency results. Finally, we construct a simple performancemodel based on the principle on-chip shared resource--memorybandwidth--and use this to predict the performance of the forthcomingquad-core system.

This paper explores the feasibility of integrating energyefficiency program evaluation with the emerging need for the evaluationof programs from different "energy cultures" (demand response, renewableenergy, and climate change). The paper reviews key features andinformation needs of the energy cultures and critically reviews theopportunities and challenges associated with integrating these withenergy efficiency program evaluation. There is a need to integrate thedifferent policy arenas where energy efficiency, demand response, andclimate change programs are developed, and there are positive signs thatthis integration is starting to occur.

We present an update of our results for the electron-cloud build-up for several upgrades proposed for the LHC injectors. Specifically, we have re-examined our published results for the ecloud heat load [1] from the perspective of numerical convergence of the simulations vis-a-vis the integration time step {Delta}t. We repeated most of the simulations with ever smaller values of {Delta}t until we reached stable results, indicating numerical convergence; this was achieved at 200-500 slices per bunch, depending on the particular case. In all cases examined, the simulated heat load decreases monotonically, until the limit is reached, as {Delta}t decreases in the range explored, hence the stable results are more favorable vis-a-vis the heat load than the previous ones. This is particularly true for a bunch spacing t{sub b} = 25 ns.

None

In today's hybrid vehicle market, the Toyota/Prius drive system is currently considered the leader in electrical, mechanical, and manufacturing innovations. It is significant that in today's marketplace, Toyota is able to manufacture and sell the vehicle for a profit. This project's objective is to test the torque capability of the 2004 Prius motor and to analyze the torque properties relating to the rotor structure. The tested values of no-load back electromotive force (emf) and mechanical losses are also presented.

Geologic storage of CO2 can be a viable technology forreducing atmospheric emissions of greenhouse gases only if it can bedemonstrated that leakage from proposed storage reservoirs and associatedhazards are small or can be mitigated. Risk assessment must evaluatepotential leakage scenarios and develop a rational, mechanisticunderstanding of CO2 behavior during leakage. Flow of CO2 may be subjectto positive feedbacks that could amplify leakage risks and hazards,placing a premium on identifying and avoiding adverse conditions andmechanisms. A scenario that is unfavorable in terms of leakage behavioris formation of a secondary CO2 accumulation at shallow depth. This paperdevelops a detailed numerical simulation model to investigate CO2discharge from a secondary accumulation, and evaluates the role ofdifferent thermodynamic and hydrogeologic conditions. Our simulationsdemonstrate self-enhancing as well as self-limiting feedbacks.Condensation of gaseous CO2, 3-phase flow of aqueous phase -- liquid CO2-- gaseous CO2, and cooling from Joule-Thomson expansion and boiling ofliquid CO2 are found to play important roles in the behavior of a CO2leakage system. We find no evidence that a subsurface accumulation of CO2at ambient temperatures could give rise to a high-energy discharge, aso-called "pneumatic eruption."

We study supersymmetric QCD in the conformal window as a laboratory for unparticle physics, and analyze couplings between the unparticle sector and the Higgs sector. These couplings can lead to the unparticle sector being pushed away from its scale invariant fixed point. We show that this implies that low energy experiments will not be able to see unparticle physics, and the best hope of seeing unparticles is in high energy collider experiments such as the Tevatron and the LHC. We also demonstrate how the breaking of scale invariance could be observed at these experiments.

This White Paper summarizes the outcome of the Town Meeting on Phases of QCD that took place January 12-14, 2007 at Rutgers University, as part of the NSAC 2007 Long Range Planning process. The meeting was held in conjunction with the Town Meeting on Hadron Structure, including a full day of joint plenary sessions of the two meetings. Appendix A.1 contains the meeting agenda. This Executive Summary presents the prioritized recommendations that were determined at the meeting. Subsequent chapters present the essential background to the recommendations. While this White Paper is not a scholarly article and contains few references, it is intended to provide the non-expert reader

Liquid array technology has previously been used to show proof-of-principle of a multiplexed non structural protein serological assay to differentiate foot-and-mouth infected and vaccinated animals. The current multiplexed assay consists of synthetically produced peptide signatures 3A, 3B and 3D and recombinant protein signature 3ABC in combination with four controls. To determine diagnostic specificity of each signature in the multiplex, the assay was evaluated against a naive population (n = 104) and a vaccinated population (n = 94). Subsequently, the multiplexed assay was assessed using a panel of bovine sera generated by the World Reference Laboratory for foot-and-mouth disease in Pirbright, UK. This sera panel has been used to assess the performance of other singleplex ELISA-based non-structural protein antibody assays. The 3ABC signature in the multiplexed assay showed comparative performance to a commercially available non-structural protein 3ABC ELISA (Cedi test{reg_sign}) and additional information pertaining to the relative diagnostic sensitivity of each signature in the multiplex is acquired in one experiment. The encouraging results of the evaluation of the multiplexed assay against a panel of diagnostically relevant samples promotes further assay development and optimization to generate an assay for routine use in foot-and-mouth disease surveillance.

The purpose of this annual monitoring report is to evaluate the conditions of and identify trends for groundwater beneath the ERDF and to report leachate results in fulfillment of the requirements specified in the ERDF ROD.

The Very High Temperature gas cooled reactor (VHTR) is one of the GEN IV reactor concepts that have been proposed for thermochemical hydrogen production and other process-heat applications like coal gasification. The USDOE has selected the VHTR for further research and development, aiming to demonstrate emissions-free electricity and hydrogen production at a future time. One of the major safety advantages of the VHTR is the potential for passive decay heat removal by natural circulation of air in a Reactor Cavity Cooling System (RCCS). The air-side of the RCCS is very similar to the Reactor Vessel Auxiliary Cooling System (RVACS) that has been proposed for the PRISM reactor design. The design and safety analysis of the RVACS have been based on extensive analytical and experimental work performed at ANL. The Natural Convective Shutdown Heat Removal Test Facility (NSTF) at ANL that simulates at full scale the air-side of the RVACS was built to provide experimental support for the design and analysis of the PRISM RVACS system. The objective of this work is to demonstrate that the NSTF facility can be used to generate RCCS experimental data: to validate CFD and systems codes for the analysis of the RCCS; and to support …

We have evaluated the usefulness of the self-potential (SP)geophysical method to track the onset and location of microbialsulfate-reduction in saturated sediments during organic carbon amendment.Following stimulation of sulfate-reducing bacteria (SRB) by addition oflactate, anomalous voltages exceeding 600 mV correlated in space and timewith the accumulation of dissolved sulfide. Abiotic experiments in whichthe sulfide concentration at the measurement electrode was systematicallyvaried showed a positive correlation between the magnitude of the SPanomaly and differences in the half-cell potential associated with themeasurement and reference electrodes. Thus, we infer that the SPanomaliesresulted from electrochemical differences that developedbetween sulfide-rich regions and areas having higher oxidation potential.In neither experiment did generation of an SP anomaly require thepresence of an in situ electronic conductor, as is required by othermodels. These findings emphasize the importance of incorporation ofelectrochemical effects at electrode surfaces in interpretation of SPdata from geophysical studies. We conclude that SP measurements provide aminimally invasive means for monitoring stimulated sulfate-reductionwithin saturated sediments.

Annual Illness and Injury Surveillance Program report for 2003 for Sandia National Laboratories-Albuquerque. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The IISP monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

Heating by irradiation of a solid surface in vacuum with 5 x 10{sup 20} W cm{sup -2}, 0.8 ps, 1.05 {micro}m wavelength laser light is studied by x-ray spectroscopy of the K-shell emission from thin layers of Ni, Mo and V. A surface layer is heated to {approx} 5 keV with an axial temperature gradient of 0.6 {micro}m scale length. Images of Ni Ly{sub {alpha}} show the hot region has a {approx} 25 {micro}m diameter, much smaller than {approx} 70 {micro}m region of K{sub {alpha}} emission. 2D particle-in-cell (PIC) simulations suggest that the surface heating is due to a light pressure driven shock.

The quest for the development of rechargeable lithium-metal batteries has attracted vigorous worldwide research efforts because this system offers the highest theoretical specific energy [1]. For this to be achieved, the repetitive deposition and stripping of lithium must be close to fully reversible. Thus, alternative electrolytes have been investigated, such as the room-temperature ionic liquid (RTILs). Lithium can be cycled with a high degree of reversibility with efficiencies exceeding 99% using systems based on N-methyl N-alkyl pyrrolidinium (P{sub 1X}{sup +}) combined with the TFSI anion [2]. More recent efforts have been directed towards systems based on P{sub 1X}{sup +} cations with the FSI anion and appear to be even more promising [3,4]. In this work, we discuss to what extent RTILs based on P{sub 1X}{sup +} cations with TFSI or FSI anions can be used as electrolytes for rechargeable Li batteries. In particular, their physical and chemical properties are thoroughly discussed so as to explain the difference observed in their electrochemical behavior. Although these two systems seem to be stable against lithium, their compatibilities with cathode materials require full assessment as well. Thus, various manganese oxide cathodes are investigated in this study. Strategies to minimize cathode dissolution are also debated, …

We correlate the positions of 13,240 Brightest Cluster Galaxies (BCGs) with 0.1 {le} z {le} 0.3 from the maxBCG catalog with radio sources from the FIRST survey to study the sizes and distributions of radio AGN in galaxy clusters. We find that 19.7% of our BCGs are radio-loud, and this fraction depends on the stellar mass of the BCG, and to a lesser extent on the richness of the parent cluster (in the sense of increasing radio loudness with increasing mass). The intrinsic size of the radio emission associated with the BCGs peaks at 55 kpc, with a tail extending to 200 kpc. The radio power of the extended sources places them on the divide between FR I and FR II type sources, while sources compact in the radio tend to be somewhat less radio-luminous. We also detect an excess of radio sources associated with the cluster, instead of with the BCG itself, extending out to {approx} 1.4 kpc.

This is concerned with imaging and wave propagation in nonhomogeneous media, and includes a collection of computational techniques, such as level set methods with material transport, Dijkstra-like Hamilton-Jacobi solvers for first arrival Eikonal equations and techniques for data smoothing. The theoretical components include aspects of seismic ray theory, and the results rely on careful comparison with experiment and incorporation as input into large production-style geophysical processing codes. Producing an accurate image of the Earth's interior is a challenging aspect of oil recovery and earthquake analysis. The ultimate computational goal, which is to accurately produce a detailed interior map of the Earth's makeup on the basis of external soundings and measurements, is currently out of reach for several reasons. First, although vast amounts of data have been obtained in some regions, this has not been done uniformly, and the data contain noise and artifacts. Simply sifting through the data is a massive computational job. Second, the fundamental inverse problem, namely to deduce the local sound speeds of the earth that give rise to measured reacted signals, is exceedingly difficult: shadow zones and complex structures can make for ill-posed problems, and require vast computational resources. Nonetheless, seismic imaging is a crucial part …

By combining the method of images with calculus of complex variables, we provide a simple expression for the electric field of a two-dimensional (2D) static elliptical charge distribution inside a perfectly conducting cylinder. The charge distribution need not be concentric with the cylinder.

In 1969, the U. S. Department of Transportation began collecting detailed data on personal travel to address various transportation planning issues. These issues range from assessing transportation investment programs to developing new technologies to alleviate congestion. This 1969 survey was the birth of the Nationwide Personal Transportation Survey (NPTS). The survey was conducted again in 1977, 1983, 1990 and 1995. Longer-distance travel was collected in 1977 and 1995. In 2001, the survey was renamed to the National Household Travel Survey (NHTS) and collected both daily and longer-distance trips in one survey. In addition to the number of sample households that the national NPTS/NHTS survey allotted to New York State (NYS), the state procured an additional sample of households in both the 1995 and 2001 surveys. In the 1995 survey, NYS procured an addition sample of more than 9,000 households, increasing the final NY NPTS sample size to a total of 11,004 households. Again in 2001, NYS procured 12,000 additional sample households, increasing the final New York NHTS sample size to a total of 13,423 households with usable data. These additional sample households allowed NYS to address transportation planning issues pertinent to geographic areas significantly smaller than for what the national …

Annual Illness and Injury Surveillance Program report for 2003 for ORNL. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

The knowledge of chemical and magnetic conditions at the Co{sub 40}Fe{sub 40}B{sub 20}/MgO interface is important to interpret the strong annealing temperature dependence of tunnel magnetoresistance of Co-Fe-B/MgO/Co-Fe-B magnetic tunnel junctions, which increases with annealing temperature from 20% after annealing at 200 C up to a maximum value of 112% after annealing at 350 C. While the well defined nearest neighbor ordering indicating crystallinity of the MgO barrier does not change by the annealing, a small amount of interfacial Fe-O at the lower Co-Fe-B/MgO interface is found in the as grown samples, which is completely reduced after annealing at 275 C. This is accompanied by a simultaneous increase of the Fe magnetic moment and the tunnel magnetoresistance. However, the TMR of the MgO based junctions increases further for higher annealing temperature which can not be caused by Fe-O reduction. The occurrence of an x-ray absorption near-edge structure above the Fe and Co L-edges after annealing at 350 C indicates the recrystallization of the Co-Fe-B electrode. This is prerequisite for coherent tunneling and has been suggested to be responsible for the further increase of the TMR above 275 C. Simultaneously, the B concentration in the Co-Fe-B decreases with increasing annealing temperature, …

Advanced electric power generation systems use a coal gasifier to convert coal to a gas rich in fuels such as H{sub 2} and CO. The gas stream contains impurities such as H{sub 2}S and HCl, which attack metal components of the coal gas train, causing plant downtime and increasing the cost of power generation. Corrosion-resistant coatings would improve plant availability and decrease maintenance costs, thus allowing the environmentally superior integrated-gasification-combined-cycle (IGCC) plants to be more competitive with standard power-generation technologies. Heat-exchangers, particle filters, turbines, and other components in the IGCC system must withstand the highly sulfiding conditions of the high-temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low cost alloy will improve is resistance to such sulfidation attack and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. The Fe- and Ni-based high-temperature alloys are susceptible to sulfidation attack unless they are fortified with high levels of Cr, Al, and Si. To impart corrosion resistance, these elements need not be in the …