A search for the production of neutral Higgs bosons {Phi} decaying into {tau}{sup +}{tau}{sup -} final states in p{bar p} collisions at a center-of-mass energy of 1.96 TeV is presented. The data, corresponding to an integrated luminosity of approximately 325 pb{sup -1}, were collected by the D0 experiment at the Fermilab Tevatron Collider. Since no excess compared to the expectation from standard model processes is found, limits on the production cross section times branching ratio are set. The results are combined with those obtained from the D0 search for {Phi}b({bar b}) {yields} b{bar b}b({bar b}) and are interpreted in the minimal supersymmetric standard model.

The authors present the results of the first search for a new particle X produced in p{bar p} collisions at {radical}s = 1.96 TeV and subsequently decaying to Z{gamma}. The search uses 0.3 fb{sup -1} of data collected with the D0 detector at the Fermilab Tevatron Collider. They set limits on the production cross section times the branching fraction {sigma}(p{bar p} {yields} X) x B(X {yields} Z{gamma}) that range from 0.4-3.5 pb at the 95% C.L. for X with invariant masses between 100 and 1000 GeV/c{sup 2} over a wide range of X decay widths.

A search for gaugino pair production with a trilepton signature in the framework of R-parity violating supersymmetry via the couplings {lambda}{sub 121}, {lambda}{sub 122}, or {lambda}{sub 133} is presented. The data, corresponding to an integrated luminosity of L {approx} 360 pb{sup -1}, were collected from April 2002 to August 2004 with the D0 detector at the Fermilab Tevatron Collider, at a center-of-mass energy of {radical}s = 1.96 TeV. This analysis considers final states with three charged leptons with the flavor combinations ee{ell}, {mu}{mu}{ell}, and ee{tau} ({ell} = e or {mu}). No evidence for supersymmetry is found and limits at the 95% confidence level are set on the gaugino pair production cross section and lower bounds on the masses of the lightest neutralino and chargino are derived in two supersymmetric models.

The authors present a search for supersymmetry in the R-parity violating resonant production and decay of smuons and muon-sneutrinos in the channels {tilde {mu}} {yields} {tilde {chi}}{sub 1}{sup 0} {mu}, {tilde {mu}} {yields} {tilde {chi}}{sub 2,3,4}{sup 0} {mu}, and {tilde {nu}}{sub {mu}} {yields} {tilde {chi}}{sub 1,2}{sup {+-}} {mu}. They analyzed 0.38 fb{sup -1} of integrated luminosity collected between April 2002 and August 2004 with the D0 detector at the Fermilab Tevatron Collider. The observed number of events is in agreement with the standard model expectation, and we calculate 95% C.L. limits on the slepton production cross section times branching fraction to gaugino plus muon, as a function of slepton and gaugino masses. In the framework of minimal supergravity, we set limits on the coupling parameter {lambda}'{sub 211}, extending significantly previous results obtained in Run I of the Tevatron and at the CERN LEP collider.

This Safety Analysis Report for Packaging (SARP) documents the analysis and testing performed on and for the 9977 Shipping Package, referred to as the General Purpose Fissile Package (GPFP). The performance evaluation presented in this SARP documents the compliance of the 9977 package with the regulatory safety requirements for Type B packages. Per 10 CFR 71.59, for the 9977 packages evaluated in this SARP, the value of ''N'' is 50, and the Transport Index based on nuclear criticality control is 1.0. The 9977 package is designed with a high degree of single containment. The 9977 complies with 10 CFR 71 (2002), Department of Energy (DOE) Order 460.1B, DOE Order 460.2, and 10 CFR 20 (2003) for As Low As Reasonably Achievable (ALARA) principles. The 9977 also satisfies the requirements of the Regulations for the Safe Transport of Radioactive Material--1996 Edition (Revised)--Requirements. IAEA Safety Standards, Safety Series No. TS-R-1 (ST-1, Rev.), International Atomic Energy Agency, Vienna, Austria (2000). The 9977 package is designed, analyzed and fabricated in accordance with Section III of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code, 1992 edition.

None

The authors present a measurement of R{sub B}, the ratio of the branching fraction for the rare decay D{sup 0} {yields} K{sup +}{pi}{sup -} to that for the Cabibbo-favored decay D{sup 0} {yields} K{sup -}{pi}{sup +}. Charge conjugate decays are implicitly included. A signal of 2005 {+-} 104 events for the decay D{sup 0} {yields} K{sup +}{pi}{sup -} is obtained using the CDF II detector at the Fermilab Tevatron collider. The data set corresponds to an integrated luminosity of 0.35 fb{sup -1} produced in {bar p}p collisions at {radical}s = 1.96 TeV. Assuming no mixing, they find R{sub B} = [4.05 {+-} 0.21(stat) {+-} 0.11(syst)] x 10{sup -3}. This measurement is consistent with the world average, and comparable in accuracy with the best measurements from other experiments.

The authors present the results of a search for standard model Higgs boson production with decay to WW*, identified through the leptonic final states e{sup +}e{sup -} {bar {nu}}{nu}, e{sup {+-}}{mu}{sup {-+}} {bar {nu}}{nu} and {mu}{sup +} {mu}{sup -} {bar {nu}}{nu}. This search uses 360 pb{sup -1} of data collected from p{bar p} collisions at {radical}s = 1.96 TeV by the upgraded Collider Detector at Fermilab (CDF II). They observe no signal excess and set 95% confidence level upper limits on the production cross section times branching ratio for the Higgs boson to WW* or any new scalar particle with similar decay products. These upper limits range from 5.5 to 3.2 pb for Higgs boson masses between 120 and 200 GeV/c{sup 2}.

The authors present results of a search for anomalous production of events containing a charged lepton ({ell}, either e or {mu}) and a photon ({gamma}), both with high transverse momentum, accompanied by additional signatures, X, including missing transverse energy (E{sub T}) and additional leptons and photons. We use the same kinematic selection criteria as in a previous CDF search, but with a substantially larger data set, 305 pb{sup -1}, a p{bar p} collision energy of 1.96 TeV, and the upgraded CDF II detector. We find 42 {ell}{gamma}E{sub T} events versus a standard model expectation of 37.3 {+-} 5.4 events. The level of excess observed in Run I, 16 events with an expectation of 7.6 {+-} 0.7 events (corresponding to a 2.7{sigma} effect), is not supported by the new data. In the signature of {ell}{ell}{gamma} + X we observe 31 events versus an expectation of 23.0 {+-} 2.7 events. In this sample we find no events with an extra photon or E{sub T} and so find no events like the one ee{gamma}{gamma}E{sub T} event observed in Run I.

We describe a measurement of the top quark mass using events with two charged leptons collected by the CDF II detector from p{bar p} collisions with {radical}s = 1.96 TeV at the Fermilab Tevatron. The likelihood in top mass is calculated for each event by convoluting the leading order matrix element describing q{bar q} {yields} t{bar t} {yields} b{ell}{nu}{sub {ell}}{bar b}{ell}{prime} {nu}{sub {ell}}, with detector resolution functions. The presence of background events in the data sample is modeled using similar calculations involving the matrix elements for major background processes. In a data sample with integrated luminosity of 340 pb{sup -1}, we observe 33 candidate events and measure M{sub top} = 165.2 {+-} 6.1(stat.) {+-} 3.4(syst.) GeV/c{sup 2}. This measurement represents the first application of this method to events with two charged leptons and is the most precise single measurement of the top quark mass in this channel.

None

We report an updated measurement of the top quark mass in the lepton plus jets channel of t{bar t} events from p{bar p} collisions at {radical}s = 1.96 TeV. This measurement uses a dataset with integrated luminosity of 680 pb{sup -1}, containing 360 t{bar t} candidates separated into four subsamples. A top quark mass is reconstructed for each event by using energy and momentum constraints on the top quark pair decay products. We also employ the reconstructed mass of hadronic W boson decays W {yields} jj to constrain in situ the largest systematic uncertainty of the top quark mass measurement: the jet energy scale. Monte Carlo templates of the reconstructed top quark and W boson mass are produced as a function of the true top quark mass and the jet energy scale. The distribution of reconstructed top quark and W boson mass in the data are compared to the Monte Carlo templates using a likelihood fit to obtain: M{sub top} = 173.4 {+-} 2.8 GeV/c{sup 2}.

This report includes information regarding issues and policy challenges with U.S.-European trade relations. Growing strains, resolving longstanding disputes, and strengthening the multilateral trading system are among topics discussed in this report.

The major objectives of the proposed study are to 1) determine the leaching characteristics of Cr(VI) from contaminated sediments collected from 100 area spill sites, 2) elucidate possible Cr(VI) mineral and/or chemical associations that may be responsible for Cr(VI) retention in the Hanford site 100 areas through the use of i) macroscopic solubility studies and ii) microscale characterization of contaminated sediments, and 3) from these data construct a conceptual model of Cr(VI) geochemistry in the Hanford 100 area vadose zone. These objectives are based on locating and obtaining contaminated sediment with depth and at varying Cr(VI) concentrations as we hypothesize that mineral/chemical-Cr(VI) associations should be related to the total Cr concentration and other master geochemical variables (e.g., pH, counter-cation type and concentration, and water content). In addressing these objectives, additional benefits accrued will be (1) a fuller understanding of Cr(VI) entrained in the vadose zone that will that can be utilized in modeling potential Cr(VI) source terms, and 2) accelerating the Columbia River 100 area corridor cleanup by developing remedial action based on a fundamental understanding of Cr(VI) vadose zone geochemistry.

This paper presents a new technique--Integrated Bayesian Uncertainty Estimator (IBUNE) to account for the major uncertainties of hydrologic rainfall-runoff predictions explicitly. The uncertainties from the input (forcing) data--mainly the precipitation observations and from the model parameters are reduced through a Monte Carlo Markov Chain (MCMC) scheme named Shuffled Complex Evolution Metropolis (SCEM) algorithm which has been extended to include a precipitation error model. Afterwards, the Bayesian Model Averaging (BMA) scheme is employed to further improve the prediction skill and uncertainty estimation using multiple model output. A series of case studies using three rainfall-runoff models to predict the streamflow in the Leaf River basin, Mississippi are used to examine the necessity and usefulness of this technique. The results suggests that ignoring either input forcings error or model structural uncertainty will lead to unrealistic model simulations and their associated uncertainty bounds which does not consistently capture and represent the real-world behavior of the watershed.

This paper examines several multi-model combination techniques: the Simple Multimodel Average (SMA), the Multi-Model Super Ensemble (MMSE), Modified Multi-Model Super Ensemble (M3SE) and the Weighted Average Method (WAM). These model combination techniques were evaluated using the results from the Distributed Model Intercomparison Project (DMIP), an international project sponsored by the National Weather Service (NWS) Office of Hydrologic Development (OHD). All of the multi-model combination results were obtained using uncalibrated DMIP model outputs and were compared against the best uncalibrated as well as the best calibrated individual model results. The purpose of this study is to understand how different combination techniques affect the skill levels of the multi-model predictions. This study revealed that the multi-model predictions obtained from uncalibrated single model predictions are generally better than any single member model predictions, even the best calibrated single model predictions. Furthermore, more sophisticated multi-model combination techniques that incorporated bias correction steps work better than simple multi-model average predictions or multi-model predictions without bias correction.

A method for evaluation of coupled optics functions, detection of strong perturbing elements, determination of BPM calibration errors and tilts using turn-by-turn (TBT) data is presented as well as the new version of the Hamiltonian perturbation theory of betatron oscillations the method is based upon. An example of application of the considered method to the Tevatron is given.

In light water reactors (LWRs), vessel internal components made of nickel-base alloys are susceptible to environmentally assisted cracking. A better understanding of the causes and mechanisms of this cracking may permit less conservative estimates of damage accumulation and requirements on inspection intervals. A program is being conducted at Argonne National Laboratory to evaluate the resistance of Ni alloys and their welds to environmentally assisted cracking in simulated LWR coolant environments. This report presents crack growth rate (CGR) results for Alloy 182 shielded-metal-arc weld metal in a simulated pressurized water reactor (PWR) environment at 320 C. Crack growth tests were conducted on 1-T compact tension specimens with different weld orientations from both double-J and deep-groove welds. The results indicate little or no environmental enhancement of fatigue CGRs of Alloy 182 weld metal in the PWR environment. The CGRs of Alloy 182 in the PWR environment are a factor of {approx}5 higher than those of Alloy 600 in air under the same loading conditions. The stress corrosion cracking for the Alloy 182 weld is close to the average behavior of Alloy 600 in the PWR environment. The weld orientation was found to have a profound effect on the magnitude of crack growth: …

The report emphasizes smooth transition from paper-based procedure systems (PBPSs) to computer-based procedure systems (CBPSs) for the existing commercial nuclear power plants in the U.S. The expected advantages and of the transition are mentioned including continued, safe and efficient operation of the plants under their recently acquired or desired extended licenses. The report proposes a three-stage survey to aid in developing a national strategic plan for the transition from PBPSs to CBPSs. It also includes a comprehensive questionnaire that can be readily used for the first stage of the suggested survey.

LiFePO{sub 4} has several potential advantages in comparison to the transition metal oxide cathode materials used in commercial lithium-ion batteries. However, its low intrinsic electronic conductivity ({approx} 10{sup -9} S/cm) is problematic. We report here a study by soft x-ray absorption/emission spectroscopy of the electronic properties of undoped LiFePO{sub 4} and Li-doped LiFePO{sub 4} in which Li{sup +} ions are substituted for Fe{sup 2+} ions in an attempt to increase the intrinsic electronic conductivity. The conductivities of the Li{sub 1+x}Fe{sub 1-x}PO{sub 4} samples were, however, essentially unchanged from that of the undoped LiFePO{sub 4}. Nonetheless, evidence for changing the electronic properties of LiFePO{sub 4} by doping with excess Li+ was observed by the XAS/XES spectroscopy. New pre-edge features the O-1s XAS spectrum of Li{sub 1.05}Fe{sub 0.95}PO4 is a direct indication that the charge compensation for substitution of Fe{sup 2+} by Li{sup +} resides in the unoccupied O-2p orbitals. A charge transfer (CT) excitation was also observed in the doped material implying that the unoccupied O-2p orbitals created by doping are strongly hybridized with unoccupied Fe-3d orbitals of neighboring sites. However, the strong covalent bonding within the (PO{sub 4}){sup 3-} anions and the large separation of the Fe cations means that …

The status of groundwater level monitoring at Los Alamos National Laboratory (LANL) in 2005 is provided in this report. The Groundwater Level Monitoring Project was instituted in 2005 to provide a framework for the collection and processing of quality controlled groundwater level data. This report summarizes groundwater level data for 137 monitoring wells, including 41 regional aquifer wells, 22 intermediate wells, and 74 alluvial wells. Pressure transducers were installed in 118 monitoring wells for continuous monitoring of groundwater levels. Time-series hydrographs of groundwater level data are presented along with pertinent construction and location information for each well.

None

This report provides a brief analysis of the proposal for change introduced or discussed in the 109th Congress and will be updated as events warrant.

None