This report presents background on the Carl D. Perkins Vocational and Applied Technology Education Act, rovides a funding history of the Act, and tracks and analyzes legislation during the 105th Congress to revise and reauthorize the Perkins Act.

This report presents background on the Carl D. Perkins Vocational and Applied Technology Education Act, provides a funding history of the Act, and tracks and analyzes legislation during the 105 Congress to revise and reauthorize the Perkins Act. Specifically the report th examines H.R. 1853 as passed by the House and H.R. 1385 as passed by the Senate. Key issues include whether and how to change state and substate formulas; what percentage of funds to reserve for statewide activities and administration; and how best to ensure services for “special populations,” such as students with disabilities. The report will be updated as legislative action warrants.

Generalized geologic province information and data on house construction were used to predict indoor radon concentrations in New Hampshire (NH). A mixed-effects regression model was used to predict the geometric mean (GM) short-term radon concentrations in 259 NH towns. Bayesian methods were used to avoid over-fitting and to minimize the effects of small sample variation within towns. Data from a random survey of short-term radon measurements, individual residence building characteristics, along with geologic unit information, and average surface radium concentration by town, were variables used in the model. Predicted town GM short-term indoor radon concentrations for detached houses with usable basements range from 34 Bq/m{sup 3} (1 pCi/l) to 558 Bq/m{sup 3} (15 pCi/l), with uncertainties of about 30%. A geologic province consisting of glacial deposits and marine sediments, was associated with significantly elevated radon levels, after adjustment for radium concentration, and building type. Validation and interpretation of results are discussed.

The aims of our project have not changed significantly since the original proposal. Our primary goals were to support field experiments by screening strains of bacteria to find favorable transport characteristics among field isolates and to estimate collision efficiencies for those bacteria in typical Oyster site sediments. The data we obtained were disseminated to other members of the subprogram. For example, Tim Ginn of PNL incorporated our results into his field model; Aaron Mills used our work for comparison purposes; and John Wilson used our results to determine if there is a correlation between facies type and cell adhesion. Copies of all information were also sent to Mary DeFlaun of Envirogen for incorporation into the Sample Tables. In addition to the originally proposed work, we performed longer column studies, examining the effects of aluminum, iron, and water chemistry on bacterial transport, and beginning to understand the role of electrostatic interactions as determinants of biocolloid/collector affinity.

The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error-forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA.

Crystalline mullite coatings have been chemically vapor deposited onto SiC substrates to enhance the corrosion and oxidation resistance of the substrate. Current research has been divided into three distinct areas: (1) Development of the deposition processing conditions for increased control over coating`s growth rate, microstructure, and morphology; (2) Analysis of the coating`s crystal structure and stability; (3) The corrosion resistance of the CVD mullite coating on SiC.

In this work the authors report results of narrowband amplifiers designed for milliwatt and submilliwatt power consumption using JFET and pseudomorphic high electron mobility transistors (PHEMT) GaAs-based technologies. Enhancement-mode JFETs were used to design both a hybrid amplifier with off-chip matching as well as a monolithic microwave integrated circuit (MMIC) with on-chip matching. The hybrid amplifier achieved 8--10 dB of gain at 2.4 GHz and 1 mW. The MMIC achieved 10 dB of gain at 2.4 GHz and 2 mW. Submilliwatt circuits were also explored by using 0.25 {micro}m PHEMTs. 25 {micro}W power levels were achieved with 5 dB of gain for a 215 MHz hybrid amplifier. These results significantly reduce power consumption levels achievable with the JFETs or prior MESFET, heterostructure field effect transistor (HFET), or Si bipolar results from other laboratories.

The present invention is an improvement on the LIGA microfabrication process wherein a buffer layer is applied to the upper or working surface of a substrate prior to the placement of a resist onto the surface of the substrate. The buffer layer is made from an inert low-Z material (low atomic weight), a material that absorbs secondary X-rays emissions from the substrate that are generated from the substrate upon exposure to a primary X-rays source. Suitable materials for the buffer layer include polyamides and polyimide. The preferred polyimide is synthesized from pyromellitic anhydride and oxydianiline (PMDA-ODA).

The author argues that the d{sub x{sup 2}{minus}y{sup 2}}-wave superconductor is marginally stable in the presence of external perturbations. Subjected to the external perturbations by magnetic impurities, it develops a secondary component of the gap, complex d{sub xy}, to maximize the coupling to impurities and lower the total energy. The secondary d{sub xy} component exists at high temperatures and produces the full gap {approximately} 20K in the single particle spectrum around each impurity, apart from impurity induced broadening. At low temperatures the phase ordering transition into global d{sub x{sup 2}{minus}y{sup 2}} + id{sub xy} state occurs.

From time to time, Congress has considered the operation of the National Environmental Policy Act. While Congress has amended the statute itself only twice since its enactment, Congress has often enacted provisions that modify the application of the Act or specify the extent of the documents that need be prepared in particular instances or contexts. This report collects and lists examples of such provisions.

This report describes the research that supports the Subsurface Science Program by maintaining a culture collection of microorganisms isolated from deep terrestrial subsurface environments (the Subsurface Microbial Culture Collection, or SMCC). The general distribution of cultures and data was identified as an important function of the SMCC. The accomplishments related to this function of the culture collection are described.

The original DAMP (DAta Manipulation Program) was written by Mark Hedemann of Sandia National Laboratories and used the CA-DISSPLA{trademark} (available from Computer Associates International, Inc., Garden City, NY) graphics package as its engine. It was used to plot, modify, and otherwise manipulate the one-dimensional data waveforms (data vs. time) from a wide variety of accelerators. With the waning of CA-DISSPLA and the increasing popularity of Unix{reg_sign}-based workstations, a replacement was needed. This package uses the IDL{reg_sign} software, available from Research Systems Incorporated in Boulder, Colorado, as the engine, and creates a set of widgets to manipulate the data in a manner similar to the original DAMP and earlier versions of xdamp. IDL is currently supported on a wide variety of Unix platforms such as IBM{reg_sign} workstations, Hewlett Packard workstations, SUN{reg_sign} workstations, Microsoft{reg_sign} Windows{trademark} computers, Macintosh{reg_sign} computers and Digital Equipment Corporation VMS{reg_sign} and Alpha{reg_sign} systems. Thus, xdamp is portable across many platforms. The author has verified operation, albeit with some minor IDL bugs, on personal computers using Windows 95 and Windows NT; IBM Unix platforms; and DEC alpha and VMS systems; HP 9000/700 series workstations; and Macintosh computers, both regular and PowerPC{trademark} versions. Version 3 adds the capability to manipulate images …

During the test of the LEDA injector on the CRITS RFQ, an automatic data acquisition system has been implemented. The purpose was to measure the sparking rate of this CW RFQ. The RF level has some influences on vacuum, but there is no evidence of any reciprocal effect. The raw sparking rate is very difficult to interpret, since burst of sparks bias the statistics. A more convenient and useful interpretation is the number of sparking seconds. At the nominal field level (1.75 Kilp), the sparking-second rate is 0.5 per minute without beam. It strongly depends on the field, with a logarithmic law: 4.5 decade/Kilp. With beam, the sparking rate jumps to 3.0 per minute. As far as tested, it depends neither on the beam current (20 to 80 mA) nor on the field (1.5 to 1.7 Kilp tested). With sparking rates as measured here, one could not hope to build an RFQ that would be free of sparks over a several months continuous operation. Such a requirement, based on an extrapolation of the curves presented here, would lead to a maximal electric field much lower than the Kilpatrick value, an unreasonable requirement for a functional RFQ. A conclusion is that …

This document defines the data quality objectives, (DQOS) for sampling the B-Cell racks waste stream. The sampling effort is concentrated on determining a ratio of Cs-137 to Sr-90 and Cs-137 to transuranics (TRU). Figure 1.0 shows the logic path of sampling effort. The flow chart begins with sample and data acquisition and progresses toward (a) statistical confidence and waste classification boundaries, (b) management decisions based on the input parameters and technical methods available, and (c) grout container volume/weight limits and radiation limits. The end result will be accurately classifying the B-Cell rack waste stream.

Small organic scintillators that exhibit pulse shape differences (PSD) in response to charged particles have been investigated as possible neutron detectors in the energy range from 1 to 200 MeV. Neutrons in this energy range can induce reactions such as (n,p) and (n,alpha) in these scintillators, and the cross sections for these reactions vary with energy. Pulse-height and PSD distributions were measured as a function of neutron energy for small crystals of NaI(Tl) and CsI(Tl) at the LANSCE-WNR pulsed spallation neutron source. PSD information indicating the relative numbers of protons and alphas produced can give information about the neutron spectrum in fast-neutron radiation fields such as those encountered in space exploration.

This describes a test program to establish the in-situ material properties of the reinforced concrete in Building 221-U for comparison to the original design specifications. Field sampling and laboratory testing of concrete and reinforcing steel structural materials in Building 221-U for design verification will be undertaken. Forty seven samples are to be taken from radiologically clean exterior walls of the canyon. Laboratory testing program includes unconfined compressive strength of concrete cores, tensile strength of reinforcing steel, and petrographic examinations of concrete cores taken from walls below existing grade.

Pellet injection has been used on the DIII-D tokamak to study density limits and particle transport in H-mode and inner wall limited L-mode plasmas. These experiments have provided a variety of conditions in which to examine the fueling efficiency of pellets injected into DIII-D plasmas. The fueling efficiency defined as the total increase in number of plasma electrons divided by the number of pellet fuel atoms, is determined by measurements of density profiles before and just after pellet injection. The authors have found that there is a decrease in the pellet fueling efficiency with increased neutral beam injection power. The pellet penetration depth also decreases with increased neutral beam injection power so that, in general, fueling efficiency increases with penetration depth. The fueling efficiency is generally 25% lower in ELMing H-mode discharges than in L-mode due to an expulsion of particles with a pellet triggered ELM. A comparison with fueling efficiency data from other tokamaks shows similar behavior.

An exploratory study was conducted under the Architectural Surety Program to examine the possibility of modifying fracture of glass in the shock-wave environment associated with terrorist bombings. The intent was to explore strategies to reduce the number and severity of injuries resulting from those attacks. The study consisted of a series of three experiments at the Energetic Materials Research and Testing Center (EMRTC) of the New Mexico Institute of Mining and Technology at Socorro, NM, in which annealed and tempered glass sheets were exposed to blast waves at several different levels of overpressure and specific impulse. A preliminary assessment of the response of tempered glass to the blast environment suggested that inducing early failure would result in lowering fragment velocity as well as reducing the loading from the window to the structure. To test that possibility, two different and novel procedures (indentation flaws and spot annealing) were used to reduce the failure strength of the tempered glass while maintaining its ability to fracture into small cube-shaped fragments. Each experiment involved a comparison of the performance of four sheets of glass with different treatments.

In this study we first discuss a pulsed EPR experiment designed to establish the mechanism of coherence generation [1]. The pulse sequence employed, flash-t-({pi}/2){sub x}-{tau}, consists of a short laser pulse at time zero, followed by a variable period t. At the end of this period a non-ideal ({pi}/2) microwave pulse is applied. The resulting free-induction decay at fixed detection time {tau} is then monitored as a function of successively incremented values of t. For P{sub 700}{sup +} A{sub 1}{sup {minus}} in deuterated and {sup 15}N-substituted PSI preparations, the transverse magnetization shows an oscillatory dependence on the delay between the laser and the microwave pulse [1]. Apparently, there are fast initial oscillations which disappear 250 ns after the laser pulse. In addition, slow persisting oscillations with frequencies of a few MHz can be observed. Basically, these slow oscillations represent nuclear coherences initiated by the laser pulse [1].

Using precisely controlled laboratory conditions we have begun to establish a spectral catalogue of the intermediate ionization states of iron, Fe IX - Fe XXIV, in the extreme ultraviolet. The measurements are being performed in support of the development of reliable modeling codes for the analysis of data from the Extreme Ultraviolet Explorer and future space astrophysics missions sensitive to extreme ultraviolet radiation. They aim to resolve the controversies surrounding the short-wavelength spectra of stellar coronae. Preliminary measurements showing the wealth of iron lines in the 50-120 {Angstrom} region are presented.

Accelerator-based photoneutron sources have enjoyed wide use and offer the advantages of long term stability, ease of control and absence of radioactive materials. The authors report here measurements of the yield of photoneutrons from a neutron generator using a compact betatron (466 kg total weight, 900 by 560 by 350 mm betatron dimensions) at the Institute of Introscopy of the Tomsk Polytechnic University. Electrons were accelerated to energies up to 10 MeV and produced a bremsstrahlung beam with a dose rate of 0.16 Gy/min (at 10 MeV, 1 meter from the bremsstrahlung target) to irradiate LiD, Be, depleted U, and Pb neutron-producing targets. The angular distributions of photoneutrons produced by bremsstrahlung beams were measured with a long counter and integrated to determine neutron yield. In addition, neutron time of flight spectra were recorded from all targets using a 15 meter flight path perpendicular to the photon beam. The maximum observed yields were 5.2 {times} 10{sup 4} n/rad/gram target obtained with LiD, 1.7 {times} 10{sup 4} n/rad/gram from Be, 3.3 {times} 10{sup 3} n/rad/gram from U, and 7.5 {times} 10{sup 2} n/rad/gram from Pb. Optimization of target dimensions, shape, and positioning is expected to increase the yield from the LiD target …

The objectives of this project are to design, assemble, test, and demonstrate a prototype Internal Reflection Sensor (IRS) for the cone penetrometer. The sensor will ultimately be deployed during site characterization with the goal of providing real-time, in situ detection of NonAqueous Phase Liquids (NAPLs) in the subsurface. In the first phase of this program, we have designed and assembled an IRS module that interfaces directly to a standard cone penetrometer system. Laboratory tests demonstrated that the sensor responds in real-time to a wide variety of free phase NAPLs without interference from natural materials such as water and soil of various types or dissolved contaminants. In a preliminary field test, the sensor was able to locate NAPLs at thin, discrete depths in a soil test pit when deployed with a cone penetrometer. Ruggedness of the device was tested with a series of penetrometer pushes to the depth of refusal at a clean location. There was no visible damage to the sensor and its performance did not change in the course of these experiments. Based on the successes of the Phase I program, it is recommended that the project proceed to full-scale demonstration in Phase II.

Argonne National Laboratory is demonstrating the application of electrometallurgical treatment processes to Experimental Breeder Reactor-II spent nuclear fuel. Begun in June 1996, 100 driver fuel assemblies and 25 blanket fuel assemblies will be conditioned during this demonstration project. In order to validate the technical and economic viability of the technology, the Department of Energy has established four success criteria with specific supporting goals. The results from both laboratory-scale and engineering-scale testing are being used to evaluate the processes, products and equipment against the target goals. The interim results have provided confidence that the integrated electrometallurgical processes will prove to be a viable option for treating problematic spent nuclear fuels for geologic disposal.

The purpose of this Plan is to outline the minimum health and safety requirements to which all participating Lawrence Livermore National Laboratory (LLNL) and non-LLNL employees (excluding National Ignition Facility [NIF] specific contractors and subcontractors covered under the construction subcontract packages (e.g., CSP-9)-see Construction Safety Program for the National Ignition Facility [CSP] Section I.B. ''NIF Construction Contractors and Subcontractors'' for specifics) shall adhere to for preventing job-related injuries and illnesses during Conventional Facilities construction activities at the NIF Project. For the purpose of this Plan, the term ''LLNL and non-LLNL employees'' includes LLNL employees, LLNL Plant Operations staff and their contractors, supplemental labor, contract labor, labor-only contractors, vendors, DOE representatives, personnel matrixed/assigned from other National Laboratories, participating guests, and others such as visitors, students, consultants etc., performing on-site work or services in support of the NIF Project. Based upon an activity level determination explained in Section 1.2.18, in this document, these organizations or individuals may be required by site management to prepare their own NIF site-specific safety plan. LLNL employees will normally not be expected to prepare a site-specific safety plan. This Plan also outlines job-specific exposures and construction site safety activities with which LLNL and non-LLNL employees shall comply.