On May 22, 1995, the U.S. Supreme Court in U.S. Term Limits, Inc. v. Thornton (Sup. Ct. Doc. No. 93-1456) in a 5-4 decision held that Arkansas' constitutional amendment, Section 3 of Amendment 73, providing for limitations on congressional terms of office was unconstitutional in that it established an additional qualification for congressional office in violation of Article I, Sections 2 and 3 setting forth the three basic qualifications of age, citizenship and inhabitancy for Members of Congress.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Whether a person who has successfully completed deferred adjudication community supervision and who has been discharged after dismissal of charges pursuant to section 5(c) of article 42.12 of the Code of Criminal Procedure is eligible to apply to the Board of Pardons and Paroles for a pardon.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Whether a member of the board of directors of a statewide certified development corporation created by the Department of Commerce pursuant to section 481.077 of the Government Code is immune from personal liability by virtue of section 481.051 of the Government Code.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Whether section 161.091 of the Health and Safety Code prohibits a physician from investing in, and referring patients to, a business entity that offers certain health care services.

This document provides a test plan for the conduct of electric arc vitrification testing by a vendor in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. The vendor providing this test plan and conducting the work detailed within it [one of seven selected for glass melter testing under Purchase Order MMI-SVV-384216] is the US Bureau of Mines, Department of the Interior, Albany Research Center, Albany, Oregon. This test plan is for Phase I activities described in the above Purchase Order. Test conduct includes feed preparation activities and melting of glass with Hanford LLW Double-Shell Slurry Feed waste simulant in a 3-phase electric arc (carbon electrode) furnace.

The Vertical Denitrating Calciner system will stabilize certain unique solutions containing fissile salts by removing the water and nitrate ion to produce a more easily stored powder. This end is achieved by high-firing the solution in the calciner. The resultant calcine is distinguished by particles which are larger and denser than those produced by the more conventional oxalate precipitation process. This criticality safety evaluation report examines criticality safety for the denitration system, installed in glovebox 188-1 at PFP. The examination shows that, due to the incorporation of standard criticality safety design techniques, the glovebox can be maintained subcritical with minimal reliance on administrative controls. The examination also shows that, ignoring the necessary administrative controls can make a criticality possible in glovebox 188-1. Section 3.0 of this report lists the necessary administrative controls.

At about 1100 on July 2, 1980, a temperature rise above normal was recorded on charts monitoring operation of the incinerator in Room 149, Building 771. The plenum overheat alarm sounded at 1215, emergency actions initiated, and the fire was extinguished and mop-up began at about 1300. Investigation determined that the fire in the plenum was caused by a heat rise in the system, a deteriorated bypass valve on the No. 3 heat exchanger (KOH scrubber), nitration of the urethane seal on the HEPA filter media to the filter frame, and accumulation of metallic fines on the filter media. It was concluded that the management system responded properly, except for the ring- down system to activate the Emergency Operations Center.

This report presents the details of the Hanford waste tank characterization study for tank 241-SX-106. The drivers and objectives of the headspace vapor sampling and analysis were in accordance with procedure that were presented in other reports. The vapor and headspace gas samples were collected and analyzed to determine the potential risks to tank farm workers due to fugitive emissions from the tank.

This report presents the details of the Hanford waste tank characterization study for tank 241-T-107. The drivers and objectives of the headspace vapor sampling and analysis were in accordance with procedure that were presented in other reports. The vapor and headspace gas samples were collected and analyzed to determine the potential risks to tank farm workers due to fugitive emissions from the tank.

This report presents the details of the Hanford waste tank characterization study for tank 241-BX-104. The drivers and objectives of the headspace vapor sampling and analysis were in accordance with procedure that were presented in other reports. The vapor and headspace gas samples were collected and analyzed to determine the potential risks to tank farm workers due to fugitive emissions from the tank.

This report presents the details of the Hanford waste tank characterization study for tank 241-TY-101. The drivers and objectives of the headspace vapor sampling and analysis were in accordance with procedure that were presented in other reports. The vapor and headspace gas samples were collected and analyzed to determine the potential risks to tank farm workers due to fugitive emissions from the tank.

The Ecological Monitoring Program (ECMP) was established at the Rocky Flats Environmental Technology Site (Site) in September 1992. At that time, EcMP staff developed a Program Plan that was peer-reviewed by scientists from western universities before submittal to DOE RFFO in January 1993. The intent of the program is to measure several quantitative variables at different ecological scales in order to characterize the Rocky Flats ecosystem. This information is necessary to document ecological conditions at the Site in impacted and nonimpacted areas to determine if Site practices have had ecological impacts, either positive or negative. This information can be used by managers interested in future use scenarios and CERCLA activities. Others interested in impact analysis may also find the information useful. In addition, these measurements are entered into a database which will serve as a long-term information repository that will document long-term trends and potential future changes to the Site, both natural and anthropogenic.

Progress is reported on the design of a pulsed fluidized bed combustor and component, fabrication, and construction site activities.

The Plutonium Finishing Plant (PFP) is currently stabilizing about 25 kg of Pu sludge; upon completion of this task, PFP will be maintained in a safe standby condition to await decision from the PFP NEPA review. It can take about 10 years to initiate and complete terminal cleanout after this; the facility will then be decommissioned and decontaminated. The 234-5Z ventilation system must continue to operate until terminal cleanout. Part of the ventilation system is the seismic fan shutdown system which shuts down the ventilation supply fans in case of strong earthquake. This document presents criteria for installing solid state, reduced voltage motor starters and isolation contactors for the 8 main ventilation supply fans. The isolation contactors will shutdown the supply fans in event of earthquake.

The advantages of a dedicated, ground-based observatory over measurements from spacecraft are its relative adaptability, ease of maintenance, and low cost. However, groundbased observations must contend with problems introduced by observing through the Ear-th`s atmosphere and by changes in the long-term stability of the observing instrument. Both of these problems have been addressed at SCLERA and currently pose no limitation of solar diameter measurements at the parts-per-n-tillion level. The atmospheric problems of seeing and differential refraction are managed by separate procedures. For the former, a technique is used for the definition of the edge of a solar limb which exhibits a greatly reduced sensitivity to atmospheric seeing (Hill, Stebbins, and Oleson 1975). For the latter, diameters measured at several solar latitudes are used to yield a solar oblateness and diameter with reduced sensitivity to differential refraction. Differential radius measurements are used to detect changes in the solar limb-darkening function with a reduced sensitivity to differential refraction. The long-term stability of the telescope is monitored with an interferometric technique which is itself stable over long periods of time. Exploration of information contained in the global oscillations of the Sun is the basis of solar seismology programs. Such exploration permits the examination …

This report provides an evaluation that establishes plutonium inventory estimates for all DSTs based on known tank history information, the DST plutonium inventory tracking system, tank characterization measurements, tank transfer records, and estimated average concentration values for the various types of waste. These estimates use data through December 31, 1994, and give plutonium estimates as of January 1, 1995. The plutonium inventory values for the DSTs are given in Section 31. The plutonium inventory estimate is 224 kg for the DSTs and 854 kg for the SSTs for a total of 1078 kg. This value compares favorably with the total plutonium inventory value of 981 kg obtained from the total plutonium production minus plutonium recovery analysis estimates.

The objective of this document is to report and interpret the findings of the isolation barrier acceptance tests performed in 105KE/100K. The tests were performed in accordance with the test plan (McCracken 1995c) and acceptance test procedure (McCracken 1995a). The test report (McCracken 1995b) contains the test data. This document compares the test data (McCracken 1995b) against the criteria (McCracken 1995a, c). A discussion of the leak rate analytical characterization (Irwin 1995) describes how the flow characteristics and the flow rate will be determined using the test data from the test report (McCracken 1995b). The barriers must adequately control the leakage from the main basin to the discharge chute to less than the 1,500 gph (5,680 lph) Safety Analysis Report (SAR 1994) limit.

The goal of the West Hackberry Tertiary Project is to demonstrate the technical and economic feasibility of combining air injection with the Double Displacement Process for tertiary oil recovery. The Double Displacement Process is the gas displacement of a water invaded oil column for the purpose of recovering oil through gravity drainage. The novel aspect of this project is the use of air as the injection fluid. The target reservoir for the project is the Camerina C-1,2,3 Sand located on the West Flank of West Hackberry Field in Cameron Parish, Louisiana. If successful, this project will demonstrate that the use of air injection in the Double Displacement Process can economically recover oil in reservoirs where tertiary oil recovery is presently uneconomic. Air injection was initiated on November 17, 1994. During this quarter, the West Hackberry Tertiary Project completed the first six months of air injection operations. The following events are reviewed in this quarter`s technical progress report: (1) early nitrogen breakthrough seen in the Gulf Land D No. 56; (2) corrosion downhole in the air injectors and at the wellsite injection skid; (3) fill in the Watkins No. 16 air injection well; (4) temperature logs run in air injectors(after 24 …

This report presents the details of the Hanford waste tank characterization study for tank 241-C-110. The drivers and objectives of the headspace vapor sampling and analysis were in accordance with procedure that were presented in other reports. The vapor and headspace gas samples were collected and analyzed to determine the potential risks to tank farm workers due to fugitive emissions from the tank.

This report presents the details of the Hanford waste tank characterization study for tank 241-TY-103. The drivers and objectives of the headspace vapor sampling and analysis were in accordance with procedure that were presented in other reports. The vapor and headspace gas samples were collected and analyzed to determine the potential risks to tank farm workers due to fugitive emissions from the tank.

This report presents the details of the Hanford waste tank characterization study for tank 241-U-106. The drivers and objectives of the headspace vapor sampling and analysis were in accordance with procedures that were presented in other reports. The vapor and headspace gas samples were collected to determine the potential risks to tank farm workers due to fugitive emissions from the tank.

The purpose of this Site Environmental Report (SER) is to characterize site environmental management performance, confirm compliance with environmental standards and requirements, and highlight significant programs and efforts. The SER, provided annually in accordance with Department of Energy DOE Order 5400.1, serves the public by summarizing monitoring data collected to assess how the Strategic Petroleum Reserve (SPR) impacts the environment. This report (SER) provides a balanced synopsis of non-radiological monitoring and regulatory compliance data and affirms that the SPR has been operating within acceptable regulatory limits. Included in this report is a description of each site`s environment, an overview of the SPR environmental program, and a recapitulation of special environmental activities and events associated with each SPR site during 1994. Two of these highlights include decommissioning of the Weeks Island facility (disposition of 73 million barrels of crude oil inventory) as well as the degasification of up to 144 million barrels of crude oil inventory at the Bayou Choctaw, Big Hill, Bryan Mound, and West Hackberry facilities. The decision to decommission the Weeks Island facility is a result of diminishing mine integrity from ground water intrusion. Degasifying the crude oil is required to reduce potentially harmful emissions that would occur …

The window and door industry in North America have a strong interest in harmonizing US and Canadian rating procedures and standards for predicting the thermal performance of their products. The costs and time associated with complying with the requirements in both countries are significant and could be reduced through reciprocity. The purpose of this paper is to compare the US and Canadian rating programs. Joint efforts between the US and Canada can use this information to focus on reconciling the differences and to work towards reciprocity. The following identifies the applicable procedures and standards for both countries, and summarizes the major differences in the products that are covered, the sizes that are used, the U-factor and solar heat gain coefficient calculational and test methods, air leakage measurement, prediction of annual energy use, condensation resistance methods, reporting requirements, and accreditation and certification programs. The major differences between the system s are identified and recommendations are made to achieve reciprocity. The appendix contains a paper that is a synopsis of the findings from this study.

This study presents estimates of the solid radioactive waste quantities that will be generated in the Separations, Low-Level Waste Vitrification and High-Level Waste Vitrification facilities, collectively called the Tank Waste Remediation System Treatment Complex, over the life of these facilities. This study then considers previous estimates from other 200 Area generators and compares alternative methods of handling (segregation, packaging, assaying, shipping, etc.).