The availability of precise, real-time intelligence has been an integral part of a military technical revolution being implemented by the Department of Defense for post-Cold War conflicts and peacekeeping operations. Providing this intelligence requires new types of equipment, analysis and organizational relationships within the U.S. intelligence community.

A more convenient sampling and analysis method for the volatile N-nitrosamines (VNA) in ETS, using commercially available TherrnosorbIN cartridges, was developed and validated. Using the method, emission factors for the two major VNA in environmental tobacco smoke (ETS) were determined in a room-sized environmental chamber for six commercial cigarette brands, which together accounted for 62.5% of the total market in California in 1990. The average emission factors were 565 {+-} 115 and 104 {+-} 20 ng per cigarette for N-nitrosodimethylamine and N-nitrosopyrrolidine, respectively. The emission factors were used to estimate VNA exposures from ETS in a typical office building and an average residence. Indoor concentrations of N,N dimethylnitrosamine from ETS for these scenarios were less than 10% of the reported median outdoor concentration. This median outdoor concentration, however, includes many measurements made in source-dominated areas and may be considerably higher than one based on more representative sampling of outdoor air.

The U.S. Department of Energy, Nevada Operations Office (DOE/NV) Environmental Restoration Division is seeking to evaluate groundwater contamination resulting from 30 years of underground nuclear testing at the Nevada Test Site (NTS). This evaluation requires knowledge about what radioactive materials are in the groundwater and how they are transported through the underground environment. This information coupled with models of groundwater flow (flow paths and flow rates) will enable predictions of the arrival of each radionuclide at a selected receptor site. Risk assessment models will then be used to calculate the expected environmental and human doses. The accuracy of our predictions depends on the validity of our hydrologic and risk assessment models and on the quality of the data for radionuclide concentrations in ground water at each underground nuclear test site. This paper summarizes what we currently know about radioactive material in NTS groundwater and suggests how we can best use our limited knowledge to proceed with initial modeling efforts. The amount of a radionuclide available for transport in groundwater at the site of an underground nuclear test is called the hydrologic source term. The radiologic source term is the total amount of residual radionuclides remaining after an underground nuclear test. …

A major stable isotope mapping project is underway that will provide important baseline information to the State of California in management of their groundwater resources. The results represent a new technological application using isotope hydrology to better understand and predict the sustainability of California`s groundwater supply for the future. This project is driven by the fact that Californians inhabit a semi-arid region of seasonal precipitation, but have created a lifestyle and economic infrastructure requiring a sub-tropical climate. They have accomplished this by engineering systems that store and divert alpine runoff, and by utilizing a large, productive alluvial aquifer. In the past, both of these resources appeared to be unlimited. Today, water shortages are recognized, regardless of drought conditions. Because Californians maintain their current practices of prolific water use, the deep-seated competition between agricultural users and urban consumers has been amplified. This has been aggravated by the acquisition of one-third of the available surface water resources for maintenance of aquatic habitats. The State of California accepts and encourages the use of groundwater to supplement these diverse water demands. Stable isotope imaging of the groundwater resources has proven to be the most economical and effective means to diagnose the health of the …

Prosthetic joint implants currently in use exhibit high Realistic computer modeling of prosthetic implants provides an opportunity for orthopedic biomechanics researchers and physicians to understand possible in vivo failure modes, without having to resort to lengthy and costly clinical trials. The research presented here is part of a larger effort to develop realistic models of implanted joint prostheses. The example used here is the thumb carpo-metacarpal (cmc) joint. The work, however, can be applied to any other human joints for which prosthetic implants have been designed. Preliminary results of prosthetic joint loading, without surrounding human tissue (i.e., simulating conditions under which the prosthetic joint has not yet been implanted into the human joint), are presented, based on a three-dimensional, nonlinear finite element analysis of three different joint implant designs.

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for 1994 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976-1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) generally characterize the radiological environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. For many years it was the only radionuclide found to have migrated in measurable quantities. Analyses since 1984 have indicated the presence of low levels of …

The United States Air Force has developed plastic media blasting (PMB) to replace solvent paint stripping of its aircraft. This paint blasting operation generates a waste stream of mainly pulverized plastic, but the stream also contains enough paint pigments to make the PMB waste RCRA hazardous. A Phase I study identified density separation as the preferred treatment alternative to land disposal of the entire PMB waste stream in a hazardous landfill. This study found density separation to be a less attractive alternative to self-encapsulation, solidification/stabilization (S/S), and low-temperature ashing. Self-encapsulation resulted in a volume decrease but only moderate improvement in Toxicity Characteristic Leaching Procedure (TCLP) performance Solidification/Stabilization (S/S) into cementiaous waste for resulted in excellent TCLP performances, but volume increases. Low-temperature ashing resulted in dramatic volume decreases, but off-gas control is required to contain all the RCRA metals. The resulting ash must be stabilized (e.g., S/S) to meet TCLP limits.

Integrated system validation is one aspect of the US Nuclear Regulatory Commission`s design review process for human-system interfaces. This paper will consider three methodological issues that must be addressed in validation and their implications for drawing conclusions about the acceptability of the integrated system. They are: representing the integrated system, representing the operational events it must handle, and representing system performance. A logical basis for generalizability from validation tests to predicted performance of the integrated system emerges from the comparability of the psychological and physical processes of the test and actual situations. Generalizability of results is supported when the integrated system, operating conditions and performance are representative of their real-world counterparts. The methodological considerations for establishing representativeness are discussed.

This paper presents the cooperative design efforts of LBL, SLAC, and LLNL on the magnet power conversion systems for PEP-II. The systems include 900 channels of correction magnet bipolar supplies and 400 unipolar supplies in the range of 5 to 500 kW. We show the decision process and technical considerations influencing the choice of power supply technologies employed. We also show the development of specifications that take maximum advantage of both the resources available and existing facilities while at the same time satisfying tight constraints for cost control, scheduling and coordination of different working groups. Switch-mode power conversion techniques will be used extensively in these systems, from the corrector supplies to the largest units if the dynamic performance specifications demand it. General system descriptions for each of the power supply ranges and for a new common control system interface and regulator are included.

This report describes the results of accelerated aging experiments (weathering) conducted on prototype tamper tapes bonded to a variety of surface materials. The prototype tamper tapes were based on the patented Confirm{reg_sign} tamper-indicating technology developed and produced by 3M Company. Tamper tapes bonded to surfaces using pressure sensitive adhesive (PSA) and four rapid-set adhesives were evaluated. The configurations of the PSA-bonded tamper tapes were 1.27-cm-wide Confirm{reg_sign} 1700 windows with vinyl underlay and 2.54-cm-wide Confirm{reg_sign} 1700 windows with vinyl and polyester underlays. The configurations of the rapid-set adhesive-bonded tamper tapes were 2.54-cm-wide Confirm{reg_sign} (1700, 1500 with and without primer, and 1300) windows with vinyl underlay. Surfaces used for bonding included aluminum, steel, stainless steel, Kevlar{reg_sign}, brass, copper, fiberglass/resin with and without gel coat, polyurethane-painted steel, acrylonitrile:butadiene:styrene plastic, polyester fiberglass board, Lexan polycarbonate, and cedar wood. Weathering conditions included a QUV cabinet (ultraviolet light at 60{degrees}C, condensing humidity at 40{degrees}C), a thermal cycling cabinet (-18{degrees}C to 46{degrees}C), a Weather-O-Meter (Xenon lamp), and exposure outdoors in Daytona Beach, Florida. Environmental aging exposures lasted from 7 weeks to 5 months. After exposure, the tamper tapes were visually examined and tested for transfer resistance. Tamper tapes were also exposed to a variety of chemical liquids …

The U.S. Department of Energy (DOE) has prepared an Environmental Assessment (EA) for seven decontamination and decommissioning (D&D) projects at the Mound Plant in Miamisburg, Ohio, that have not been previously addressed in the Final Environmental Impact Statement for the Mound Facility (June 1979). Based on the information presented in the EA, the DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement (EIS) is not required and the Department is issuing this Finding of No Significant Impact (FONSI).

Studies conducted at BNL, have shown that a cost-efficient and environmentally acceptable biochemical technology for detoxification of geothermal sludges is most satisfactory, as well as technically achievable. This technology is based on biochemical reactions by which certain extremophilic microorganisms interact with inorganic matrices of geothermal origin. The biochemical treatment of wastes generated by power plants using geothermal energy is a versatile technology adaptable to several applications beyond that of rendering hazardous and/or mixed wastes to non-hazardous by products, which meet regulatory requirements. This technology may be used for solubilization or recovery of a few metals to the isolation of many metals including radionuclides. In the metal recovery mode, an aqueous phase is generated which meets regulatory standards. The resulting concentrate contains valuable trace metals and salts which can be further converted into income generating products which can off-set the initial investment costs associated with the new biotechnology. In this paper, recent developments in this emerging technology will be discussed.

A linear least-squares procedure for the determination of modal residues using time-domain system realization theory is presented. The present procedure is shown to be theoretically equivalent to residue determination in realization algorithms such as the Eigensystem Realization Algorithm (ERA) and Q-Markov COVER. However, isolating the optimal residue estimation problem from the general realization problem affords several advantages over standard realization algorithms for structural dynamics identification. Primary among these are the ability to identify data sets with large numbers of sensors using small numbers of reference point responses, and the inclusion of terms which accurately model the effects of residual flexibility. The accuracy and efficiency of the present realization theory-based procedure is demonstrated for both simulated and experimental data.

The TRC code, a mid-course tracking code for ballistic missiles, has previously been implemented on a 1024-processor MIMD (Multiple Instruction -- Multiple Data) massively parallel computer. Measures of Effectiveness (MOE) for this algorithm have been developed for this computing environment. The MOE code is run in parallel with the TRC code. Particularly useful MOEs include the number of missed objects (real objects for which the TRC algorithm did not construct a track); of ghost tracks (tracks not corresponding to a real object); of redundant tracks (multiple tracks corresponding to a single real object); and of unresolved objects (multiple objects corresponding to a single track). All of these are expressed as a function of time, and tend to maximize during the time in which real objects are spawned (multiple reentry vehicles per post-boost vehicle). As well, it is possible to measure the track-truth separation as a function of time. A set of calculations is presented illustrating these MOEs as a function of time for a case with 99 post-boost vehicles, each of which spawns 9 reentry vehicles.

Relationships between countries generally exist somewhere in the grey area between war and peace. Crisis prevention activities are particularly important and should have two goals: stabilizing tense situations that could push countries toward war, and supporting or reinforcing efforts to move countries toward peace. A Crisis Prevention Center (CPC) should facilitate efforts to achieve these goals. Its functions can be grouped into three broad, inter-related categories: establishing and facilitating communication among participating countries; supporting negotiations and consensus-building on regional security issues; and supporting implementation of agreed confidence and security building measures. Technology will play a critical role in a CPC. First, technology is required to establishing communication systems and to provide the means for organizing and analyzing this information. Second, technically-based cooperative monitoring can provide an objective source of information on mutually agreed issues. In addition, technology can be a neutral subject of interaction and collaboration between technical communities from different countries. Establishing a CPC in Northeast Asia does not require the existence of an Asian security regime. Potential first steps for such a CPC should include establishing communication channels and a dedicated communications center in each country, together with an agreement to use the system as a {open_quotes}Hot Line{close_quotes} …

The proton and deuteron structure functions F{sub 2}{sup p} and F{sub 2}{sup d} measured in inelastic muon scattering with an average beam energy of 470 GeV. The data were taken at Fermilab experiment 665 during 1991-1992 using liquid hydrogen and deuterium targets. The F{sub 2} measurements are reported in the range 0.0008 < x < 0.6 and 0.2 < Q{sup 2} < 75 GeV{sup 2}. These are the first precise measurements of F{sub 2} in the low x and Q{sub 2} range of the data. The E665 data overlap in x with the HERA data, and there is a smooth connection in Q{sup 2} between the two data sets. At high Q{sup 2} the E665 measurements are consistent with QCD-evolved leading twist structure function models. The data are qualitatively described by structure function models incorporating the hadronic nature of the photon at low Q{sup 2}. The Q{sup 2} and the W dependence of the data measure the transition in the nature of the photon between a point-probe at high Q{sup 2} and a hadronic object at low Q{sup 2}.

An empirical model of detonator electrical performance which describes the resistance of the exploding bridgewire (EBW) or exploding foil initiator (EFI or slapper) as a function of energy, deposition will be described. This model features many parameters that can be adjusted to obtain a close fit to experimental data. This has been demonstrated using recent experimental data taken with the cable discharge system located at Sandia National Laboratories. This paper will be a continuation of the paper entitled ``Cable Discharge System for Fundamental Detonator Studies`` presented at the 2nd NASA/DOD/DOE Pyrotechnic Workshop.

We have significantly increased our computational modeling capability by the addition of a vertical valve model in KIVA-3, code used internationally for engine design. In this report the implementation and application of the valve model is described. The model is shown to reproduce the experimentally verified intake flow problem examined by Hessel. Furthermore, the sensitivity and performance of the model is examined for the geometry and conditions of the hydrogen-fueled Onan engine in development at Sandia National Laboratory. Overall the valve model is shown to have comparable accuracy as the general flow simulation capability in KIVA-3, which has been well validated by past comparisons to experiments. In the exploratory simulations of the Onan engine, the standard use of the single kinetic reaction for hydrogen oxidation was found to be inadequate for modeling the hydrogen combustion because of its inability to describe both the observed laminar flame speed and the absence of autoignition in the Onan engine. We propose a temporary solution that inhibits the autoignition without sacrificing the ability to model spark ignition. In the absence of experimental data on the Onan engine, a computational investigation was undertaken to evaluate the importance of modeling the intake flow on the combustion …

Quench antennas for RHIC quadrupole magnets are being developed jointly by KEK and BNL. A quench antenna is a device to localize a quench origin using arrays of pick-up coils lined up along the magnet bore. Each array contains four pick-up coils: sensitive to normal sextupole, skew sextupole, normal octupole, and skew octupole field. This array configuration allows an azimuthal localization of a quench front while a series of arrays gives an axial localization and a quench propagation velocity. Several antennas have been developed for RHIC magnets and they are now routinely used for quench tests of production magnets. The paper discusses the description of the method and introduces a measured example using an antenna designed for quadrupole magnets.

In extraterrestrial applications, satellite payloads have printed circuit modules that are housed in boxes or chassis. The box may be a one piece wall or a segmented wall. These two wall options are compared for function and cost.

A prototype 10 inch flat panel Planar Optic display, (POD), screen has been constructed and tested. This display screen is comprised of hundreds of planar optic glass sheets bonded together with a cladding layer between each sheet where each glass sheet represents a vertical line of resolution. The display is 9 inches wide by 5 inches high and approximately 1 inch thick. A 3 milliwatt HeNe laser is used as the illumination source and a vector scanning technique is employed.

The chemistry and physical properties of fullerenes, the third, molecular allotrope of carbon, have been studied using both experimental and computational techniques. Early computational work investigated the stability of fullerene isomers and oxides, which was followed by extensive work on hydrogenated fullerenes. Our work led to the first synthesis of a polymer containing C{sub 60} and the synthesis of the simplest hydrocarbon derivatives of C{sub 60} and C{sub 70}. The excellent agreement between theory and experiment ({plus_minus} 0.1 kcal/mol in the relative stability of isomers) has provided insight into the chemical nature of fullerenes and has yielded a sound basis for prediction of the structure of derivatized fullerenes. Such derivatives are the key to the preparation of fullerene-based materials.

The Relativistic Heavy Ion Collider (RHIC) consists of two rings with cryogenic magnets at a 4.5K operating temperature. Control of positions of the dipole and quadrupole cold masses (iron laminations) and the beam position monitors (BPM`s) during production and installation is presented. The roll of the dipoles is controlled by a combination of rotating coil measurements with the surveying measurements. The center of the quadrupole magnetic field is obtained by direct measurement of the field shape within a colloidal cell placed inside the quadrupoles. Special attention is given to the triplet quadrupole alignment and determination of the field center position.

A diethyl phosphonate oxazoline monomer and its polymer have been synthesized. The monomer appears to polymerize via a ring-opening mechanism giving the expected polyethyleneimine backbone with pendant carbonyl groups. Two distinct molecular weights were produced during polymerization suggesting two mechanisms of chain growth. Studies are underway to elucidate the reasons for this. This polymer has potential as a metal-chelating agent.