Management (EM) to evaluate factors that are anticipated to affect waste glass reaction during repository disposal, especially in an unsaturated environment typical of what may be expected for the proposed Yucca Mountain repository site.

This report discusses the results of the environmental protection program at Argonne National Laboratory-East (ANL) for 1992. To evaluate the effects of ANL operations .on the environment, samples of environmental media collected on the site, at the site boundary, and off the ANL site were analyzed and compared to applicable guidelines and standards. A variety of radionuclides was measured in air, surface water, groundwater, soil, grass, and bottom sediment samples.

The DOE is building a new generation 6-7 GeV Synchrotron Radiation Source known as the Advanced Photon Source (APS) at Argonne National Laboratory. This facility, to be completed in FY 1996, can provide 70 x-ray sources of unprecedented brightness to meet the research needs of virtually all scientific disciplines and numerous technologies. The technological research capability of the APS in the areas of energy, communications and health will enable a new partnership between the DOE and US industry. Current funding for the APS will complete the current phase of construction so that scientists can begin their applications in FY 1996. Comprehensive utilization of the unique properties of APS beams will enable cutting-edge research not currently possible. It is now appropriate to plan to construct additional radiation sources and beamline standard components to meet the excess demands of the APS users. In this APS Beamline Initiative, 2.5-m-long insertion-device x-ray sources will be built on four straight sections of the APS storage ring, and an additional four bending-magnet sources will also be put in use. The front ends for these eight x-ray sources will be built to contain and safeguard access to these bright x-ray beams. In addition, funds will be provided …

This paper examined the technologies and issues to be considered at World Administrative Radio Conference (WARC)-92, discusses the international and domestic context for WARC-93 preparations, and analyzed the U.S. process of conference preparation.

This report discusses the earth data—positional, topographic, climatological, meteorological, man–made features, and changes over time in all of these, which are increasingly important to the military. Data from these systems are bought and extensively used by the military and intelligence communities. The need to integrate data from military-unique systems as well only complicates the situation.

This report is part of a process leading to regulations to be issued by the U.S. Department of Transportation. This process has included a review of a draft of this study by the Architectural and Transportation Barriers Compliance Board (ATBCB).

Deposition on indoor surfaces is an important removal mechanism for tobacco smoke particles. We report measurements of deposition rates of environmental tobacco smoke particles in a room-size chamber. The deposition rates were determined from the changes in measured concentrations by correcting for the effects of coagulation and ventilation. The air flow turbulent intensity parameter was determined independently by measuring the air velocities in the chamber. Particles with diameters smaller than 0.25 {micro}m coagulate to form larger particles of sizes between 0.25-0.5 {micro}m. The effect of coagulation on the particles larger than 0.5 {micro}m was found to be negligible. Comparison between our measurements and calculations using Crump and Seinfeld's theory showed smaller measured deposition rates for particles from 0.1 to 0.3 {micro}m in diameter and greater measured deposition rates for particles larger than 0.6 {micro}m at three mixing intensities. Comparison of Nazaroff and Cass model for natural convection flow showed good agreement with the measurements for particles larger than 0.1 {micro}m in diameter, however, measured deposition rates exceeded model prediction by a factor of approximately four for particles in size range 0.05-0.1 {micro}m diameter. These results were used to predict deposition of sidestream smoke particles on interior surfaces. Calculations predict that …

The testing of candidate fuel elements at prototypic operating conditions with respect to temperature, power density, hydrogen coolant flow rate, etc., a crucial component in the development and qualification of nuclear rocket engines based on the Particle Bed Reactor (PBR), NERVA-derivative, and other concepts. Such testing may be performed at existing reactors, or at new facilities. A scoping study has been performed to assess the feasibility of testing PBR based fuel elements at the TREAT reactor. initial results suggest that full-scale PBR, elements could be tested at an average energy deposition of {approximately}60--80 MW-s/L in the current TREAT reactor. If the TREAT reactor was upgraded to include fuel elements with a higher temperature limit, average energy deposition of {approximately}100 MW/L may be achievable.

Table 1 summarizes the number of jobs associated with the development and operation of a 50 MW geothermal dual flash power system. The values shown are person years (PY) of employment for the 50 MW system. About 1500 person years (PY) of labor are incorporated in the manufacture and installation of capital components of the system. Of these, about 300 PY are local to the area of the geothermal system, and about 1200 are dispersed elsewhere in the U.S. or other countries. About 71 PY of labor per year are required for the operation of the system. Of those, about 39 PY are local to the plant, and about 32 are dispersed. The total person years of labor over the entire life cycle of such a system, assuming a 30-year operational life, is on the order of 3630 person years. These include jobs during the 5 to 10 years of exploration and construction activities prior to plant start up. Of these jobs, about 1470 PY are local to the system, and about 21 60 are dispersed elsewhere.

This annual report describes progress in studies on hprt mutations induced by radon or Indium 111 along with the corresponding mutation frequency, cloning and molecular spectra in human T-lymphocytes. Parallel studies on the mutation susceptibility between individuals is being investigated by hprt mutation studies on ataxia telangiectasia and xeroderma pigmentosum.

None

Space is an Application Visualization System (AVS) graphics module designed for crystallographic and molecular research. The program can handle molecules, two-dimensional periodic systems, and three-dimensional periodic systems, all referred to in the paper as models. Using several methods, the user can select atoms, groups of atoms, or entire molecules. Selections can be moved, copied, deleted, and merged. An important feature of Space is the crystallography component. The program allows the user to generate the unit cell from the asymmetric unit, manipulate the unit cell, and replicate it in three dimensions. Space includes the Buerger reduction algorithm which determines the asymmetric unit and the space group of highest symmetry of an input unit cell. Space also allows the user to display planes in the lattice based on Miller indices, and to cleave the crystal to expose the surface. The user can display important precalculated volumetric data in Space, such as electron densities and electrostatic surfaces. With a variety of methods, Space can compute the electrostatic potential of any chemical system based on input point charges.

The conventional theory of high-n toroidal drift waves, based on the ballooning representation, indicates that shear-damping is generally reduced in a torus compared to its plane-slab value. It therefore describes the most unstable class of toroidal drift waves. However, modes of this type occur only i f the diamagnetic frequency [omega]*(r) has a maximum in r, and they affect only a small fraction, [Omicron](1/n[sup l/2]), of the plasma radius around this maximum. Consequently they may produce little anomalous transport. In the present work we show that, within the ballooning description, there is another class of toroidal drift waves with very different properties to the conventional ones. The new modes have greater shear-damping (closer to that in a plane-slab) than the conventional ones and so have a higher instability threshold. However, they occur for any plasma profile and at all radii, and they have larger radial extent. Consequently they may produce much greater anomalous transport than the possibly benign conventional modes. This suggests a picture of anomalous transport in which the plasma profile is determined by marginal stability, but marginal to the new class of modes not to the conventional ones. This might explain why marginally stable profiles calculated for drift …

A significant amount of electrical energy used to cool non-residential buildings is drawn by the fans used to transport the cool air through the thermal distribution system. Hydronic systems reduce the amount of air transported through the building by separating ventilation and thermal conditioning. Due to the physical properties of water, hydronic distribution systems can transport a given amount of thermal energy using less than 5% of the otherwise necessary fan energy. This savings alone significantly reduces the energy consumption and especially the peak power requirement This survey clearly shows advantages for radiant cooling in combination with hydronic thermal distribution systems in comparison with the All-Air Systems commonly used in California. The report describes a literature survey on the system's development, thermal comfort issues, and cooling performance. The cooling power potential and the cooling power requirement are investigated for several California climates. Peak-power requirement is compared for hydronic radiant cooling and conventional All-Air-Systems.

Oxide superconductors with high critical temperature [Tc] make sensitive thermometers for several types of infrared bolometers. The authors built composite bolometers with YBa[sub 2]Cu[sub 3]O[sub 7[minus][delta]] thermometers on sapphire substrates which have higher sensitivity than competing thermal detectors which operate at temperatures above 77 K. A 1 x 1 mm bolometer with gold black serving as the radiation absorber has useful sensitivity for wavelengths 20--100 [mu]m. A 3 x 3 mm bolometer with a bismuth film as the absorber operates from 20--100 [mu]m. High-[Tc] bolometers which are fabricated with micromachining techniques on membranes of Si or Si[sub 3]N[sub 4] have potential application to large-format arrays which are used for infrared imaging. A nonisothermal high-[Tc] bolometer can be fabricated on a membrane of yttria-stabilized zirconia (YSZ) which is in thermal contact with the heat sink along the perimeter of the membrane. A thermal analysis indicates that the YSZ membrane bolometer can have improved sensitivity compared to the sapphire bolometer for spectrometer applications. The quasiparticle tunneling current in a superconductor-insulator-superconductor (SIS) junction is highly nonlinear in the applied voltage. The authors have made the first measurement of the linear response of the quasiparticle current in a Nb/AlO[sub x]/Nb junction over a broad …

The goal of this field review was to provide information to the Bonneville Power Administration (BPA) regarding previous and ongoing fish habitat improvement projects in central Idaho. On July 14, 1992, the review team met at the Sawtooth National Recreation Area office near Ketchum, Idaho, for a slide presentation illustrating several habitat projects during their construction phases. Following the slide presentation, the review team inspected fish habitat projects that have been implemented in the last several years in the Stanley Basin and adjacent valleys. At each site the habitat project was described to the field team and a brief period for project inspection followed. The review team visited approximately a dozen sites on the Challis, Sawtooth, and Boise National Forests over a period of approximately two and a half days. There are two objectives of this review namely to summarize observations for specific field sites and to provide overview commentary regarding the BPA habitat improvement program in central Idaho.

The new 18-sector Long-term Industrial Energy Forecasting (LIEF) model is designed for convenient study of future industrial energy consumption, taking into account the composition of production, energy prices, and certain kinds of policy initiatives. Electricity and aggregate fossil fuels are modeled. Changes in energy intensity in each sector are driven by autonomous technological improvement (price-independent trend), the opportunity for energy-price-sensitive improvements, energy price expectations, and investment behavior. Although this decision-making framework involves more variables than the simplest econometric models, it enables direct comparison of an econometric approach with conservation supply curves from detailed engineering analysis. It also permits explicit consideration of a variety of policy approaches other than price manipulation. The model is tested in terms of historical data for nine manufacturing sectors, and parameters are determined for forecasting purposes. Relatively uniform and satisfactory parameters are obtained from this analysis. In this report, LIEF is also applied to create base-case and demand-side management scenarios to briefly illustrate modeling procedures and outputs.

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for CY 1992 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976--1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to (1) determine the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) generally characterize the radiological environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. For many years it was the only radionuclide found to have migrated in measurable quantities. Analyses since 1984 have indicated the presence of low levels …

The Savannah River One-Fourth Linear Scale, One-Sixth Sector, Tank-Muff-Pump (TMP) Separate Effects Tests (SET) are being conducted by the Idaho National Engineering Laboratory to investigate Savannah River Site (SRS) production reactor tank, muff, pump suction, and pump hydraulic response phenomena for large break loss-of-coolant accident (LBLOCA) scenarios. The test series consists of experiments representing a range of hydraulic conditions and geometries which bound those anticipated for LBLOCAs in SRS reactors. Data from these experiments will be examined to identify important hydraulic phenomena with the objective of providing data for benchmarking code calculations. Information obtained from the SET series will also expand the SRS data base on reactor LBLOCA events. Due to inherent scaling distortions and facility limitations, the results of experiments in the SET series will not be precise replications of full-scale Savannah River Site production reactor (SRSPR) response, but will provide hydraulic behavior sufficiently representative of full-scale SRSPR behavior to preserve important hydraulic phenomena and satisfy test objectives. This document is Appendix SET-TMP-PT of the Experiment Operating Specification for the third set of experiments in the SET series. It contains information on experiment operation and facility configuration necessary to meet the key objectives stated in the bingham pump formal …

Task 3 provides detailed characterization of fuel properties of the test coals and in-depth evaluation of their performance characteristics under controlled pilot-scale combustion testing. Results from this task provide fundamental information required to develop some of the improved algorithms for the CQE. Both bench-scale fuel characterization and test furnace performance evaluations are being performed under this task. All pilot-scale combustion tests under this task have been completed. Topical reports for the coals evaluated under the Public Service Oklahoma's Northeastern Unit 4 and Northern States Power's King Unit 1 test series have been issued. Work continued during the past quarter on preparation of the final report for the Mississippi Power Company's Watson Unit 4 tests (to be completed first quarter 1993) and analyzing pilot-scale combustion data from the Alabama Power Company's Gaston tests; a topical report for the Gaston study will also be issued in 1993. Bench-scale testing and data analyses continued in support of the development of the slagging and fouling models. Data obtained from the analysis of samples of deposits, inflame solids, fly ash, and coal from CQE pilot-scale and drop tube combustion tests were evaluated for use in devising and verifying the slagging and fouling algorithms.

This report discusses the research on the following topics: DIII-D program overview; divertor and boundary research program; advanced tokamak studies; tokamak physics; operations; program development; support services; contribution to ITER physics R D; and collaborative efforts.

An algorithm is developed to study particle dynamics of beams including collective interaction with high accuracy and low noise. Particle dynamics with collective interactions is treated through particle simulation, where the main or average distribution f[sub 0] and the deviation away from it [delta]f are separately followed. The main distribution f[sub 0] is handled by an analytic equilibrium solution and the perturbation away from it [delta]f is followed by the method of characteristics. We call this the [delta]f algorithm. We specifically model a synchrotron collider which includes the collision section where collective effects of collisions are simulated by this [delta]f algorithm and the rest of the collider where single particle dynamics are treated by simple harmonic transport. The most important target of this simulation is to understand and predict the long-time behavior of the beam luminosity and lifetime. The [delta]f method allows the study the effect of small perturbations over long timescales on beam lifetime by eliminating the numerical noise problem inherent in Particle-in-Cell techniques. In the [delta]f code using the reference parameters of the SSC (Superconducting Super Collider), beam blow-up near resonances and oscillations in the tune shift, [Delta][nu], far from resonances are observed. In studying long timescale particle …

In a field evaluation conducted for the US Department of Energy (DOE) Office of Federal Energy Management Program (FEMP), the Pacific Northwest Laboratory (PNL) examined the performance of a new US energy-related technology under the FEMP Test Bed Demonstration Program. The technology was a 15-ton natural gas engine driven roof top air conditioning unit. Two such units were installed on a naval retail building to provide space conditioning to the building. Under the Test Bed Demonstration Program, private and public sector interests are focused to support the installation and evaluation of new US technologies in the federal sector. Participating in this effort under a Cooperative Research and Development Agreement (CRADA) with DOE were the American Gas Cooling Center, Philadelphia Electric Company, Thermo King Corporation, and the US Naval Air Station at Willow Grove, Pennsylvania. Equipment operating and service data as well as building interior and exterior conditions were secured for the 1992 cooling season. Based on a computer assessment of the building using standard weather data, a comparison was made with the energy and operating costs associated with the previous space conditioning system. Based on performance during the 1992 cooling season and adjusted to a normal weather year, the technology …

In this paper we discuss the observed variation in plasma performance with plasma shape, in particular, we shall compare single and double null diverted plasmas. The product [beta][center dot][tau] has been used as a figure-of-merit for comparing different toroidal magnetic configurations. Here we shall use it as the figure-of-merit for comparing differing configurations within the DIII-D tokamak.