Beams of metallic ion species can be produced by the ECR (electron cyclotron resonance) ion source and by the MEVVA (metal vapor vacuum arc) ion source. Although the ECR source is fundamentally a gaseous ion source, metal ion beams can be produced by introducing metallic feed material into the plasma discharge using a number of techniques. The ion charge states can be very high, which is a significant advantage to most applications. The MEVVA ion source, on the other hand, is specifically a metal ion source. It has produced metallic ion beams from virtually all the solid metallic elements at a current of typically hundreds of milliamperes; the ions produced are in general multiply ionized, but not as highly stripped as those generated in the ECR source. Although the MEVVA source at present operates in a pulsed mode with a low duty cycle (less than or equal to 1%), work is in progress to increase the duty cycle significantly. In this paper the operation and performance of the LBL ECR and MEVVA ion sources, with respect to metal ion generation, are described.

We discuss an improvement to the algorithm developed by Yu for modelling rf cavities in klystrons using the port approximation. In this method, the cavity is simulated by imposing an rf voltage as a boundary condition across the outer wall. The voltage and phase are chosen to be consistent with the cavity impedence and with the rf current induced by the electron beam. In the original method, each cavity was calculated successively using either linear theory or an iterative method to achieve a self-consistent voltage. The new method relaxes the voltage and phase of several cavities simultaneously during the simulation. The time dependence of the voltages are calculated from a relaxation equation. The new algorithm reduces the total computation time by about a factor of five for a complete klystron.

Periodic newsletter discussing information related to legislation, state finance, and other topics related to Texas government. This issue focuses on comparing various financial data to analyze the Texas economic system.

This report is divided into analytical spectroscopy; radioactive materials analysis; inorganic chemistry; organic chemistry; ORNL environmental programs; quality assurance, safety, and training; supplementary activities; and presentation of research results.

The Analytical Chemistry Division of Oak Ridge National Laboratory (ORNL) is a large and diversified organization. As such, it serves a multitude of functions for a clientele that exists both in and outside of ORNL. These functions fall into the following general categories: (1) Analytical Research, Development, and Implementation. The division maintains a program to conceptualize, investigate, develop, assess, improve, and implement advanced technology for chemical and physicochemical measurements. Emphasis is on problems and needs identified with ORNL and Department of Energy (DOE) programs; however, attention is also given to advancing the analytical sciences themselves. (2) Programmatic Research, Development, and Utilization. The division carries out a wide variety of chemical work that typically involves analytical research and/or development plus the utilization of analytical capabilities to expedite programmatic interests. (3) Technical Support. The division performs chemical and physicochemical analyses of virtually all types. The Analytical Chemistry Division is organized into four major sections, each of which may carry out any of the three types of work mentioned above. Chapters 1 through 4 of this report highlight progress within the four sections during the period January 1 to December 31, 1988. A brief discussion of the division's role in an especially important …

The Annex to the 7-GeV Advanced Photon Source Conceptual Design Report updates the Conceptual Design Report of 1987 (CDR-87) to include the results of further optimization and changes of the design during the past year. The design changes can be summarized as affecting three areas: the accelerator system, conventional facilities, and experimental systems. Most of the changes in the accelerator system result from inclusion of a positron accumulator ring (PAR), which was added at the suggestion of the 1987 DOE Review Committee, to speed up the filling rate of the storage ring. The addition of the PAR necessitates many minor changes in the linac system, the injector synchrotron, and the low-energy beam transport lines. 63 figs., 18 tabs.

The Annex to the 7-GeV Advanced Photon Source Conceptual Design Report updates the Conceptual Design Report of 1987 (CDR-87) to include the results of further optimization and changes of the design during the past year. The design changes can be summarized as affecting three areas: the accelerator system, conventional facilities, and experimental systems. Most of the changes in the accelerator system result from inclusion of a positron accumulator ring (PAR), which was added at the suggestion of the 1987 DOE Review Committee, to speed up the filling rate of the storage ring. The addition of the PAR necessitates many minor changes in the linac system, the injector synchrotron, and the low-energy beam transport lines. 63 figs., 18 tabs.

This report provides an annotated bibliography of completed and in-progress consumer decision research useful for technology transfer and commercialization planning by the US Department of Energy's (DOE) Office of Buildings and Community Systems (OBCS). This report attempts to integrate the consumer research studies conducted across several public and private organizations over the last four to five years. Some of the sources of studies included in this annotated bibliography are DOE National Laboratories, public and private utilities, trade associations, states, and nonprofit organizations. This study divides the articles identified in this annotated bibliography into sections that are consistent with or similar to the system of organization used by OBCS.

Report of Argonne Chemical Technology division activities, including high-performance batteries, aqueous batteries, advanced fuel cells, and coal utilization.

In this note, the authors describe the recently designed APS beam transport system to the booster synchrotron. Another transfer system which guides the beam from the booster to the storage ring is described and therefore it will not be treated here. The system of interest consists of two parts; the transfer line LTOA from the injector linac to the positron accumulator ring (PAR) and the transfer line ATOB from the accumulator ring to booster synchrotron. For the design, they assumed that the rms transverse emittance of the linac output beam is about 1.1 mm mrad at 450 MeV and the energy spread is {+-} 1%. The plan view of the designed beam transfer line is given.

In 1988 the Atmospheric and Geophysical Sciences Division began its 15th year as a division. As the Division has grown over the years, its modeling capabilities have expanded to include a broad range of time and space scales ranging from hours to years, and from kilometers to global, respectively. For this report, we have chosen to show a subset of results from several projects to illustrate the breadth, depth, and diversity of the modeling activities that are a major part of the Division's research, development, and application efforts. In addition, the recent reorganization of the Division, including the merger of another group with the Division, is described, and the budget, personnel, models, and publications are reviewed. 95 refs., 26 figs., 2 tabs.

Diminished natural fish production in the Columbia River Basin has prompted increased artificial propagation to compensate both for losses of anadromous salmonids related to hydroelectric facilities and for other causes. The health and quality of artificially propagated smolts probably is a major influence on survival. Smolt survival varies greatly from one location to another, among different species and from one year to the next. Fish health monitoring is necessary to identify cause of mortality, assist in producing a healthy smolt, and provide a means for improving hatchery effectiveness. The Bonneville Power Administration (BPA) conducted a series of meetings to define the minimum ''needed'' level of fish health monitoring, determine what was presently being done and what additional effort was needed in the Basin's 54 anadromous fish hatcheries. Funding for the additional effort in Oregon began June 2, 1987. The goal of this project is to increase smolt-to-adult survival by accomplishing the following: (1) increase monitoring for specific fish pathogens and fish health parameters; (2) measure hatchery water supply quality; (3) identify facility impediments to fish health; (4) create a database of hatchery and fish health information; (5) establish a technical steering committee to evaluate and refine the project annually; and …

We have measured the lifetime of an ensemble of particles containing b quarks, tagged with a high p/sub T/ lepton from their semileptonic decay. Using a method which estimates the production point of each particle in the beam ellipse, we measured a lifetime of 0.98 +- 0.12 +- 0.13 psec. We have also studied methods of partially reconstructing B mesons decaying into D/sup/star//minus// mesons plus charged leptons or mesons. We have searched the Mark II PEP data samples and find five candidates for B/sup 0/ decay. Four of these B/sup 0/ candidates form good vertices, and their measured proper lifetimes are presented. 18 refs.

Extensive source terms for beta, gamma, and neutrons following fission pulses are presented in various tabular and graphical forms. Neutron results from a wide range of fissioning nuclides (42) are examined and detailed information is provided for four fuels: /sup 235/U, /sup 238/U, /sup 232/Th, and /sup 239/Pu; these bracket the range of the delayed spectra. Results at several cooling (decay) times are presented. For ..beta../sup -/ and ..gamma.. spectra, only /sup 235/U and /sup 239/Pu results are given; fission-product data are currently inadequate for other fuels. The data base consists of all known measured data for individual fission products extensively supplemented with nuclear model results. The process is evolutionary, and therefore, the current base is summarized in sufficient detail for users to judge its quality. Comparisons with recent delayed neutron experiments and total ..beta../sup -/ and ..gamma.. decay energies are included. 27 refs., 47 figs., 9 tabs.

The miscellaneous components of an accelerator may contribute a substantial or even dominant part of the interaction between beam and surroundings. We have estimated the beam impedances of a few of these components. When needed, we have added our own conceptions to the descriptions available at the Workshop on the RHIC Performance in order to make definite the calculations of impedance. These assumed parameters, while not unique, hopefully illustrate feasible and typical designs. 8 refs., 4 figs., 2 tabs.

This assessment analyzes the problem of acid deterioration of books and the program underway at the Library of Congress. The program at the Library involves the chemical treatment of books in a unique and effective process that, however, also presents some new engineering and safety concerns. Because of these concerns, the House of Representatives Committee on Appropriations requested this independent review of the Library’s system and other available or potential processes.

Interest in the bootstrap current arising from neoclassical transport in tokamaks has increased recently in view of certain experimental observations. In this study, the bootstrap current is calculated for a number of rf current-driven tokamaks. Two-dimensional, self-consistent, steady-state tokamak MHD equilibria are obtained by including both the transport-driven bootstrap current and the externally driven rf current. The self-consistency is acomplished by iterating between two-dimensional MHD equilibrium calculations and the current calculations (including bootstrap and rf ray-tracing). Calculations for other reactor parameters of interest are also carried out. It is found that for reactor-grade plasmas, the bootstrap current contribution to the toroidal current is, in general, important. An approxiamte scaling law for GAMMA, based on parametric survey performed, is also obtained. 16 refs., 8 figs., 1 tab.

The purpose of this study was to find a suitable braze alloy to close the ends of a new fuel design for N Reactor, the defense reactor at the Hanford site, Washington. An alloy composed of Zircaloy-2 + 8 wt % chromium + 8 wt % nickel (Zr2-8Cr-8Ni) was successfully used to obtain an acceptable joint with no voids. Suggestions for future work on end closure development for the new fuel are outlined. This alloy has potential use in any Zircaloy joining applications. 3 refs., 9 figs., 3 tabs.

A report discussing the findings of the Public Utility Commission of Texas and their research into energy efficiencies and production costs throughout the state.

Volume 2 of the Public Utility Commission of Texas' research into the bulk power transmission throughout the state.

The 4th Volume of the Public Utility Commission of Texas' research into the bulk power transmission throughout the state.

Subsequent to an extensive smoothing of the vacuum chamber a comprehensive study of the SPEAR impedance was undertaken. Bunch length, synchrotron quadrupole mode frequency, and parasitic mode loss were measured as functions of beam current. The results showed that, although the gross longitudinal impedance had indeed been reduced, the 'capacitive' component had also decreased relative to the 'inductive'--to the extent that previously compensated potential well distortion now induced bunch lengthening at low currents, and the turbulent threshold had actually been lowered. A specially designed multi-cell disc-loaded 'capacitor' cavity was shown to be capable of removing this effect by restoring the original compensation. A model of the new SPEAR impedance is also obtained. 7 refs., 6 figs.

In this paper we present the results of measurements of bunch length and bunch shape as a function of current in the SLC e/sup /minus//damping ring. After extraction, the SLC bunch is compressed by means of an RF compressor and a subsequent high dispersion section. By inserting a video screen at a point of large dispersion and by using the correlation between bunch length and energy spread induced by the compressor, we have measured not only the bunch length but also the longitudinal charge distribution of the bunch in the damping ring as a function of beam intensity. At 3 /times/ 10/sup 10/ particles per bunch with a peak ring RF voltage of 800 KV, the FWHM of the bunch length in the ring doubles over the nominal value. To measure the energy spread of the bunch in the damping ring, the optics of the extraction lines was modified to produce a large dispersion but small horizontal ..beta.. function at the video screen. At 3 /times/ 10/sup 10/ particles per bunch, the relative energy spread in the rings is increased by about 30%. Finally, these data are compared with calculations of bunch lengthening in the SLC damping rings. 8 refs., …

A high level of current dependent bunch lengthening has been observed in the north damping ring of the Stanford Linear Collider (SLC), indicating that the ring's impedance is very inductive. This level of bunch lengthening will limit the performance of the SLC. In order to study the problem of bunch lengthening in the damping ring and the possibility of reducing their inductance we compute, in this report, the longitudinal impedance of the damping ring vacuum chamber. More specifically we find the response function of the ring to a short gaussian bunch. This function will later be used as a driving term in the longitudinal equation of motion. We also identify the important inductive elements of the vacuum chamber and estimate their contribution to the total ring inductance. This information will be useful in assessing the effect of vacuum chamber modifications. 7 refs. , 8 figs., 1 tab.