A three-dimensional finite-element method is used to investigate thermal convection in the earth's mantle. The equations of motion are solved implicitly by means of a fast multigrid technique. The computational mesh for the spherical problem is derived from the regular icosahedron. The calculation described use a mesh with 43,554 nodes and 81,920 elements and were run on a Cray X. The earth's mantle is modeled as a thick spherical shell with isothermal, free-slip boundaries. The infinite Prandtl number problem is formulated in terms of pressure, density, absolute temperature, and velocity and assumes an isotropic Newtonian rheology. Solutions are obtained for Rayleigh numbers up to approximately 10/sup 6/ for a variety of modes of heating. Cases initialized with a temperature distribution with warmer temperatures beneath speading ridges and cooler temperatures beneath present subduction zones yield whole-mantle convection solutions with surface velocities that correlate well with currently observed plate velocities. 8 references, 6 figures.

Simulation experiments of magnet operating conditions in a fusion reactor are reported. After approximately half of the lifetime dose the results on a variety of NbTi superconductors show moderate changes of the critical current density j/sub c/ (approx. 10%), the percentage change of j/sub c/ is always larger at high fields (8 T) than at 5 T. After a rapid initial change the resistivity ratios of the Cu-stabilizer are found to decrease only slowly with increasing neutron fluence.

This annotated bibliography includes papers on atomic and molecular processes published during 1982. Sources include scientific journals, conference proceedings, and books. Each entry is designated by one or more of the 114 categories of atomic and molecular processes used by the Controlled Fusion Atomic Data Center, Oak Ridge National Laboratory to classify data. Also indicated is whether the work was experimental or theoretical, what energy range was covered, what reactants were investigated, and the country of origin of the first author. Following the bibliographical listing, the entries are indexed according to the categories and according to reactants within each subcategory.

Spin physics in the past has provided an acid test of many models and theories and over the last decade has revealed new and unexpected phenomena to confront present day theories. This work received great impetus from the experiments at the ZGS, where for the first time multi-GeV polarized beams became available. This, in conjunction with polarized targets, allowed the complete specification of the initial quantum states in high energy proton-proton interactions and led to many startling new results. Although spin effects were important at the previously measured lower energies, practically all theorists felt that spin effects would become negligible at higher energies. Instead, the ZGS results showed in many cases even larger effects than those observed at lower energies. By the time the ZGS was shut down in 1979, high energy polarized proton projects were planned for KEK in Japan, SATURNE in France, and the AGS at Brookhaven. At present, serious thought is being given to high energy polarized proton beams at Fermilab, CERN, and indeed in planning for the Superconducting Super Collider. Today, I would like to describe the facility at Brookhaven and give you the present status of the project. We have been in the commissioning phase …

Major projects of the Los Alamos National Laboratory's Accelerator Technology Division are discussed, covering activities that occurred during the last six months of calendar 1982. The first sections report highlights in beam dynamics, accelerator inertial fusion, radio-frequency structure development, the racetrack microtron, CERN high-energy physics experiment NA-12, and high-flux radiographic linac study. Next we report on selected proton Storage Ring activities that have made significant progress during this reporting period, followed by an update on the free electron laser. The Fusion Materials Irradiation Test Facility work is discussed next, then progress on the klystron development project and on the gyrocon project. The activities of the newly formed Theory and Simulation Group are outlined. The last section covers activities concerning the accelerator test stand for the neutral particle beam program.

A report by the Office of Technology Assessment (OTA) that "synthesizes OTA's technical analyses of acid rain and other transported pollutants, and presents policy alternatives for congressional considerations" (p. iii).

This project is concerned with the study of the nature and behavior of active sites in gasification of chars produced from synthesized model compounds, primarily of the phenol-formaldehyde family of resins. The current technical progress report presents further developments on resin synthesis and characterization and the design of a pyro-gasifier reactor for transient kinetic studies of the chars produced from the model compounds. 7 references, 12 figures, 2 tables.

The Advanced Light Source (ALS) is a synchrotron radiation source consisting of a 50-MeV linear accelerator, a 1.3-GeV 'booster' synchrotron, a 1.3-GeV electron storage ring, and a number of photon beam lines, as shown in Figure 1. As an introduction to a detailed description of the Advanced Light Source, this section provides brief discussions on the characteristics of synchrotron radiation and on the theory of storage rings. Appendix A contents: Introduction to Synchrotron-Radiation Sources; Storage Ring; Injection System; Control System; Insertion Devices; Photon Beam Lines; and References.

Uranium urinalysis and in vivo examination results obtained from workers at eleven uranium mills between 1978 and 1980 were evaluated. The main purpose was to determine the degree of the mills' compliance with bioassay monitoring recommendations given in the draft NRC Regulatory Guide 8.22 (USNRC 1978). The effect of anticipated changes in the draft regulatory guidance, as expressed to PNL in May 1982, was also studied. Statistical analyses of the data showed that the bioassay results did not reliably meet the limited performance criteria given in the draft regulatory guide. Furthermore, quality control measurements of uranium in urine indicated that detection limits at ..cap alpha.. = ..beta.. = 0.05 ranged from 13 ..mu..g/l to 29 ..mu..g/l, whereas the draft regulatory guidance suggests 5 ..mu..g/l as the detection limit. Recommendations for monitoring frequencies given in the draft guide were not followed consistently from mill to mill. The results of these statistical analyses indicate a need to include performance criteria for accuracy, precision, and confidence in revisions of the draft Regulatory Guide 8.22. Revised guidance should also emphasize the need for each mill to continually test the laboratory performing urinalyses by submitting quality control samples (i.e., blank and spiked urine samples as …

Progress and activities are reported in: analytical methodology, mass and emission spectrometry, radioactive materials analysis, bio/organic analysis, general and environmental analysis, and quality assurance and safety. Supplementary activities are also discussed, and a bibliography of publications is also included. (DLC)

The analyzing power in 28 GeV/c proton-proton elastic scattering was measured at P/sub perpendicular to//sup 2/ = 5.95 and 6.56 (GEV/c)/sup 2/ y/sub g/ a polarized proton target and an unpolarized proton beam at the Brookhaven National Laboratory AGS. Results indicate that the analyzing power, A, is rising sharply with P/sub perpendicular to//sup 2/. Previous measurements of the analyzing power, A, in p + p ..-->.. p + p suggested a rise in A at large-P/sub perpendicular to//sup 2/, but the statistical uncertainty in the highest point at P/sub perpendicular to//sup 2/ = 5.95 (GeV/c)/sup 2/ made it impossible to determine the magnitude of the increase. In an effort to clarify this situation, we made new measurements of A at P/sub perpendicular to//sup 2/ = 5.95 and 6.56 (GeV/c)/sup 2/. An unpolarized beam of typically 5 x 10/sup 10/ 28 GeV/c protons from the AGS at Brookhaven National Laboratory was incident upon the University of Michigan polarized proton target. This target contains irradiated ammonia beads cooled to 0.5/sup 0/K by a /sup 3/He-/sup 4/He evaporation refrigerator, in a 2.5 T magnetic field. The polarizing transitions are driven by a 70 GHz microwave system. The polarization of the hydrogen protons is …

The National Institute for Petroleum and Energy Research (NIPER) resulted from efforts by the Department of Energy (DOE) to ensure the continuity of the unique energy research capabilities that had been developed at the Bartlesville Energy Technology Center (BETC) over the past 65 years. This was accomplished by a Cooperative Agreement between DOE and IIT Research Institute (IITRI). The agreement to operate NIPER for the five fiscal years 1984-88 became effective October 1, 1983. The NIPER Annual Research Plan for 1983-84 consists of eight projects in the Base Program and 13 projects in the Optional Program. A sampling of potential Work for Others projects is also presented. The Base Program consists of five EOR and three Fundamental Petroleum Chemistry projects. The Optional Program has three EOR projects, one Unconventional Gas Recovery project, five APT projects, and four Advanced Utilization Research projects.

For ErRh/sub 4/B/sub 4/, owing to the critical spin fluctuations just above T/sub s/ (> T/sub c2/), the critical temperature at which surface ferromagnetism appears, the reciprocal penetration depth, lambda/sup -1/, decreases smoothly as T decreases toward T/sub s/. For Er/sub 0/ /sub 5/Ho/sub 0/ /sub 5/Rh/sub 4/B/sub 4/, the decrease in lambda/sup -1/ for T > T/sub c2/ is very small, and lambda/sup -1/ decreases abruptly at T/sub c2/.

The TeV I Beam Position Monitor (BPM) system is designed to provide a useful diagnostic tool during the commissioning and operational phases of the antiproton source. Simply stated the design goal is to provide single turn position information for intensities of > 1x10/sup 9/ particles, and multi-turn (clocked orbit) information for beam intensities of > 1x10/sup 7/ particles, both with sub-millimeter resolution. It is anticipated that the system will be used during commissioning for establishing the first turn through the Debuncher and Accumulator, for aligning injection orbits, for providing information necessary to correct closed orbits, and for measuring various machine parameters (e.g. tunes, dispersion, aperture, chromaticity). During normal antiproton operation the system will be used to monitor the beam position throughout the accumulation process.

A method of calculating the vacuum magnetic flux for plasma equilibrium over a range of aspect ratio A and major radius R is presented. Toroidal multipoles are used to fit the vacuum flux for a set of reference equilibria and the fitted moments are then used to parametrize the flux over the design space in A and R. An example is given in which the equilibrium flux for a D-shaped tokamak plasma is predicted and compared with the actual equilibrium code vacuum flux.

The primary concern of the Environmental Research Program is the understanding of pollutant formation, transport, and transformation and the impacts of pollutants on the environment. These impacts include global, regional, and local effects on the atmosphere and hydrosphere, and on certain aspects of human health. This multidisciplinary research program includes fundamental and applied research in physics, chemistry, engineering, and biology, as well as research on the development of advanced methods of measurement and analysis. During FY 1983, research concentrated on atmospheric physics and chemistry, applied physics and laser spectroscopy, combustion theory and phenomena, environmental effects of oil shale processing, freshwater ecology and acid precipitation, trace element analysis for the investigation of present and historical environmental impacts, and a continuing survey of instrumentation for environmental monitoring.

This paper describes a potential approach by which the International Atomic Energy Agency (IAEA) might verify the nuclear-material balance at the Portsmouth Gas Centrifuge Enrichment Plant (GCEP) for the circumstance in which the IAEA inspections occur on an intermittent basis. The verification approach is a variation of the standard IAEA attributes/variables measurement-verification method. This alternative approach is useful and applicable at the Portsmouth GCEP, which will ship all its product and tails UF/sub 6/ to United States facilities not eligible for IAEA safeguards. The paper reviews some of the relevant results of the Hexapartite Safeguards Project (HSP), describes the standard IAEA material-balance-verification approach for bulk-handling facilities, and provides the procedures to be followed in handling and processing UF/sub 6/ cylinders at the Portsmouth GCEP. The paper then discusses the assumptions made in the approach, and derives a formula for the probability with which the IAEA could detect the diversion of a significant quantity of uranium (75 kg of U-235 in depleted, normal, and low-enriched uranium) if this method were applied. The paper also provides numerical examples of IAEA detection probability should the operator divert uranium from the feed, product, or tails streams for the Portsmouth GCEP with a capacity of …

Workshop proceedings gathered by the Office of Technology Assessment (OTA) that cover the topic of space weapons and arms control as discussed during hearings.

The design and construction of a new experiment for PEP designed to measure the flux of low energy photons unaccompanied by any additional photons, or charged tracks is described. The device consists of arrays of extruded lead glass bars and PWC's in the central region with lead-scintillator shower counters, drift chambers and PWC's in the forward regions. 9 references.

Time Dependent Hartree-Fock theory, TDHF, is the most sophisticated, microscopic approach to nuclear dynamics yet practiced. Although it is far from a description of nature it does allow us to examine multiply interactive many-body systems semi quantum mechanically and to visualize otherwise covert processes. Some of the properties of the TDHF equations are stated leaving the interested reader to one of several excellent review articles for the derivations. Some of the applications to the collision of heavy ions are briefly described. (WHK)

This report assesses the uses of /sup 241/Am and the associated costs and supply. The study shows that /sup 241/Am-fueled radioisotope thermoelectric generators in the range of 1 to 5 W electrical provide the most promising use of kilogram amounts of this isotope. For medical uses, where purity is essential, irradiation of /sup 241/Am can produce 97% pure /sup 238/Pu at $21,000/g. Using a pyro-metallurgical process, /sup 241/Am could be recovered from molten salt extraction (MSE) residues at an estimated incremental cost of $83/g adjusted to reflect the disposal costs of waste products. This cost of recovery is less than the $300/g cost for disposal of the /sup 241/Am contained in the MSE residues.

The objective of this report is to present, in usable form, summary data from the Building Energy Performance Standards (BEPS) Phase II commercial buildings energy research conducted in 1978-1979. Summary data presented were obtained from two major research efforts: the BEPS Phase II Redesign experiment; and the related research on ASHRAE Standard 90-75R. The bulk of this report consists of data tabulations of key energy parameters for the 168 sample buildings, which were tabulated from computer-stored files of the 1978-1979 data. Two kinds of tabulations are included: numerical tabulations that extracted information from the computer-stored data base for the 168 sample buildings; and graphic presentations of the computer-generated data, plus data extracted from other sources. The intent is to provide a single data compendium of key energy-related factors from the 1978 redesign experiment and the associated 1978-1979 ASHRAE Standard 90-75R research. This report also supplements the information for which there was not space in the magazine articles. Thus, for some building types, additional analysis, comments, and data tabulations are included that could not be included in the articles because space was limited. These additional analysis items are not consistent across building types because both the energy conservation opportunities and the …

The estimation of systemic burdens from urinalyses has been the most common and useful method of quantifying occupational exposures to plutonium. Problems arise in using this technique, however, because of inadequate modeling of human retention, translocation, and excretion of this element. Present methods for estimating the systemic burden from urinalyses were derived to a large extent from patterns observed in the first few months after exposure, but there is now evidence that these same patterns do not persist over long periods. In this report we collect and discuss data needed for the interpretation of bioassay results for Pu. These data are used to develop a model that describes the movement, retention, and excretion of systemic Pu in the human body in terms of explicitly identified anatomical compartments. This model may be used in conjunction with existing models and/or case-specific information concerning the translocation of Pu from the respiratory or gastrointestinal tract or from wounds to the bloodstream. Attention is restricted to the behavior of Pu after it has gained access to the bloodstream. There remain significant uncertainties concerning some aspects of the movement of Pu, particularly its translocation from the liver. An attempt has been made to construct the model …

The problems addressed are the protection of uranium mill workers from occupational exposure to uranium through routine bioassay programs and the assessment of accidental worker exposures. Comparisons of chemical properties and the biological behavior of refined uranium ore (yellowcake) are made to identify important properties that influence uranium distribution patterns among organs. These studies will facilitate calculations of organ doses for specific exposures and associated health risk estimates and will identify important bioassay procedures to improve evaluations of human exposures. A quantitative analytical method for yellowcake was developed based on the infrared absorption of ammonium diuranate and U/sub 3/O/sub 8/ mixtures in KBr. The method was applied to yellowcake samples obtained from six operating mills. The composition of yellowcake from the six mills ranged from nearly pure ammonium diuranate to nearly pure U/sub 3/O/sub 8/. The composition of yellowcake samples taken from lots from the same mill was only somewhat less variable. Because uranium mill workers might be exposed to yellowcake either by contamination of a wound or by inhalation, a study of retention and translocation of uranium after subcutaneous implantation in rats was done. The results showed that 49% of the implanted yellowcake cleared from the body with a …