A technical memorandum by the Office of Technology Assessment (OTA) that presents "findings and conclusions regarding the role of the public and private research participants in the PHTME (postharvest technology and marketing economics) research, the benefits and burdens of PHTME research, trends in PHTME research funding, quality of PHTME research, and management of PHTME research in the public sector (p. iii).

This report presents a diagnostic automation that can be used to investigate classes of systems without feedback loops. This report shows the input needed for the automation, the algorithm used, and the PROLOG program for the simulation.

The MFTF-B central-cell solenoids are a set of twelve closely coupled, large superconducting magnets with similar but not exactly equal currents. Alternative methods of connecting them to their power supplies and dump resistors are investigated. The circuits are evaluated for operating conditions and fault conditions. The factors considered are the voltage to ground during a dump, short circuits, open circuits, quenches, and failure of the protection system to detect a quench. Of particular interest are the current induced in coils that remain superconducting when one or more coils quench. The alternative connections include separate power supplies, combined power supplies, individual dump resistors, series dump resistors and combinations of these. A new circuit that contains coupling resistors is proposed. The coupling resistors do not affect normal fast dumps but reduce the peak induced currents while also reducing the energy rating of the dump resistors. Another novel circuit, the series circuit with diodes, is discussed in detail.

The RAM package design certification process has two important elements, testing and acceptance. These terms sound very similar but they have specific meanings. Qualification testing in the context of this study is the imposition of simulated accident test conditions upon the candidate package design. (Normal transportation environments may also be included.) Following qualification testing, the acceptance criteria provide the performance levels which, if demonstrated, indicate the ability of the RAM package to sustain the severity of the qualification testing sequence and yet maintain specified levels of package integrity. This study has used Severities of Transportation Accidents as a data base to examine the regulatory test criteria which are required to be met by small packages containing Type B quantities of radioactive material (RAM). The basic findings indicate that the present regulatory test standards provide significantly higher levels of protection for the surface transportation modes (truck, rail) than for RAM packages shipped by aircraft. It should also be noted that various risk assessment studies have shown that the risk to the public due to severe transport accidents by surface and air transport modes is very low. A key element in this study was the quantification of the severity of the transportation …

The Analytical Chemistry Dvision of Oak Ridge National laboratory (ORNL) serves a multitude of functions for a clientele that exists both in and outside ORNL. These functions fall into the following general categories: (1) analytical research, development, and implementation; (2) programmatic research, development, and utilization; and (3) technical support. The Division is organized into five major sections, each of which may carry out any type of work falling in the three categories mentioned above. Chapters 1 through 5 of this report highlight progress within the five sections (analytical methodology, mass and emission spectrometry, radioactive materials, bio/organic analysis, and general and environmental analysis) during the period January 1, 1982 to December 31, 1982. A short summary introduces each chapter to indicate work scope. Information about quality assurance and safety programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8. Approximately 61 articles, 32 proceedings publications and 37 reports have been published, and 107 oral presentations were given during this reporting period.

This investigation consisted of the following 6 tasks: (1) improve the instrumentation for the sulfur functional groups analysis and make it more reliable. (2) create a set of reference standards of sulfur-containing compounds. (3) examine the sulfur groups distribution in untreated and desulfurized coals. (4) examine the sulfur functionalities in raw and processed coals, i.e., liquefied coals. (5) determine the distribution of sulfur functionalities in modified coals. (6) prepare computer programs for calculations related to the distribution of sulfur functional groups in coal. Each task is discussed and results are presented. Appendix A contains the computer program used to interpret the data. 31 references, 56 figures, 17 tables.

Angular distributions of target fragments from the reactions of /sup 12/C with /sup 197/Au and /sup 238/U were measured at projectile energies of 292 MeV, 1.0 GeV, 3.0 GeV, 12.0 GeV and 25.2 GeV. The angular distributions of the /sup 197/Au target fragments were all forwardly peaked. Extensively forward peaked angular distributions were observed at the non-relativistic projectile energies (292 MeV, 1.0 GeV). No obvious differences were observed in the angular distributions at the different relativistic projectile energies of 3.0 GeV, 12.0 GeV and 25.2 GeV. The characteristic angular distribution pattern from the relativistic projectile energy experiments was also observed in the non-relativistic energy experiments. Maximum degree of forward-peaking in the angular distributions at each projectile energy was observed at the product mass number (A) around 190 from the 292 MeV projectile energy, at A=180 from 1.0 GeV and at A=175 from 3.0 GeV and 12.0 GeV. In general, two different types of angular distributions were observed in the relativistic projectile energy experiments with the /sup 238/U target. Isotropic angular distributions were observed for the fission product nuclides. The angular distributions of the fission products at the intermediate (292 MeV) energy showed slightly forward- peaked angular distributions. Because of the …

This section contains edited copies of site-visit and other reports prepared by CCAWG members. Some of the hand-out materials prepared by DOE contractors and others are included (without explication) to permit readers the construction of a coherent picture of work in progress.

"This appendix contains reproductions of five reports where were issued by the Petrology Laboratory of the Geochemical Support Department, Project Operations Divisions, Bendix Field Engineering Corporation (BFEC)" (p. 1 of Appendix). Each report includes a table describing the sample and representative photomicrographs for each sample category.

Report containing documents related to the construction of of the Fission Neutron Water Factor Model.

Uranium and plutonium separations were made from simulated breeder reactor spent fuel dissolver solution with laboratory-sized pulse column contactors. Hydroxylamine nitrate (HAN) was used for reduction of plutonium (1V). An integrated extraction-partition system, simulating a breeder fuel reprocessing flowsheet, carried out a partial partition of uranium and plutonium in the second contactor. Tests have shown that acceptable coprocessing can be ontained using HAN as a plutonium reductant. Pulse column performance was stable even though gaseous HAN oxidation products were present in the column. Gas evolution rates up to 0.27 cfm/ft/sup 2/ of column cross section were tested and found acceptable.

The statistical theory of extreme values is a well established part of theoretical statistics. Unfortunately, it is seldom part of applied statistics and is infrequently a part of statistical curricula except in advanced studies programs. This has resulted in the impression that it is difficult to understand and not of practical value. In recent environmental and pollution literature, several short articles have appeared with the purpose of documenting all that is necessary for the practical application of extreme value theory to field problems (for example, Roberts, 1979). These articles are so concise that only a statistician can recognise all the subtleties and assumptions necessary for the correct use of the material presented. The intent of this text is to expand upon several recent articles, and to provide the necessary statistical background so that the non-statistician scientist can recognize and extreme value problem when it occurs in his work, be confident in handling simple extreme value problems himself, and know when the problem is statistically beyond his capabilities and requires consultation.

An appraisal was made of the concept of isolating high-level radioactive waste in the vadose zone of alluvial-filled valleys and tuffaceous rocks of the Basin and Range geomorphic province. Principal attributes of these terranes are: (1) low population density, (2) low moisture influx, (3) a deep water table, (4) the presence of sorptive rocks, and (5) relative ease of construction. Concerns about heat effects of waste on unsaturated rocks of relatively low thermal conductivity are considered. Calculations show that a standard 2000-acre repository with a thermal loading of 40 kW/acre in partially saturated alluvium or tuff would experience an average temperature rise of less than 100{sup 0}C above the initial temperature. The actual maximum temperature would depend strongly on the emplacement geometry. Concerns about seismicity, volcanism, and future climatic change are also mitigated. The conclusion reached in this appraisal is that unsaturated zones in alluvium and tuff of arid regions should be investigated as comprehensively as other geologic settings considered to be potential repository sites.

Recent work in the Ashland area has identified a low temperature geothermal resource on the order of 65-90/sup 0/F. This report concentrates on utilization of the low temperature resource through the use of water source heat pumps. Water-to-air heat pumps were examined for residential, commercial and industrial sectors in two applications; space heating and process heating. In the residential sector, the most attractive areas for heat pump use appear to be those not currently served by city water or natural gas service. Simple payback periods for these applications vary from 9.5 years to well over 20 years depending upon the specific characteristics of the site. In the commercial sector, heat pump use for space heating of government funded office type structures appears to be a viable option. This is particularly true if air conditioning is used. The payback periods for heat pump use in commercial office buildings and retail establishments, however, are beyond the values generally considered attractive by private entities.

The two-dimensional flow of a collision dominated hydrogen scrape-off plasma in an axisymmetric tokamak is examined. This flow is described by a set of equations which contain the dominant terms in a maximal ordering appropriate to high density experimental divertors and reactor scrape-off plasmas. Comparison of the theory to estimates of scrape-off parameters in the Doublet III expanded boundary plasmas suggests that analysis of classical and neoclassical processes alone may be sufficient to predict plasma transport in high density scrape-off plasmas of practical importance.

GEOTHERM sample file contains 314 records for Arizona. Three computer-generated indexes are found in appendices A, B, and C of this report. The indexes give one line summaries of each GEOTHERM record describing the chemistry of geothermal springs and wells in the sample file for Arizona. Each index is sorted by different variables to assist the user in locating geothermal records describing specific sites. Appendix A is sorted by the county name and the name of the source. Also given are latitude, longitude (both use decimal minutes), township, range, section, GEOTHERM record identifier, and temperature (/sup 0/C). Appendix B is sorted by county, township, range, and section. Also given are name of source, GEOTHERM record identifier, and temperature (/sup 0/C). Appendix C is first sorted into one-degree blocks by latitude, and longitude, and then by name of source. Adjacent one-degree blocks which are published as a 1:250,000 map are combined under the appropriate map name. Also given are GEOTHERM record identifier, and temperature (/sup 0/C). A bibliography is given in Appendix D.

GEOTHERM sample file contains 356 records for Wyoming. Three computer-generated indexes are found in appendices A, B, and C of this report. The indexes give one line summaries of each GEOTHERM record describing the chemistry of geothermal springs and wells in the sample file for Wyoming. Each index is sorted by different variables to assist the user in locating geothermal records describing specific sites. Appendix A is sorted by the county name and the name of the source. Also given are latitude, longitude (both use decimal minutes), township, range, section, GEOTHERM record identifier, and temperature (/sup 0/C). Appendix B is sorted by county, township, range, and section. Also given are name of source, GEOTHERM record identifier, and temperature (/sup 0/C). Appendix C is first sorted into one-degree blocks by latitude, and longitude, and then by name of source. Adjacent one-degree blocks which are published as a 1:250,000 map are combined under the appropriate map name. Also given are GEOTHERM record identifier, and temperature (/sup 0/C). A bibliography is given in Appendix D.

This document reports data and information on TRU waste from all DOE generating and storage sites. The geographical location of the sites is shown graphically. There are four major sections in this document. The first three cover the TRU waste groups known as Newly Generated, Stored, and Buried Wastes. Subsections are included under Newly Generated and Stored on contact-handled and remote-handled waste. These classifications of waste are defined, and the current or expected totals of each are given. Figure 1.3 shows the total amount of Buried and Stored TRU waste. Preparation of this document began in 1981, and most of the data are as of December 31, 1980. In a few cases data were reported to December 31, 1981, and these have been noted. The projections in the Newly Generated section were made, for the most part, at the end of 1981.

Hot-cell tests were conducted using (U,Pu)O{sub 2} fuels that had been irradiated to about 5.2 TJ/kg (U + Pu) [60 MWd/kg (U + Pu)] in an effort to characterize the insoluble residues that remained after the fuel pellets had been dissolved in HNO{sub 3} and in HNO{sub 3}-KF. The composition, particle size range, and density of the material were determined by newer analytical techniques, including spark-source mass spectrometry, neutron activation, scanning electron microscopy, and x-ray fluorescence, combined with older methods such as sedimentation and powder density by water displacement.

We have studied hadron production in e/sup +/e/sup -/ annihilation at 29 GeV center of mass energy. We have measured the particle fractions and particle separated differential cross sections using the PEP-4 (Time Projection Chamber) detector. The particles were identified by measuring their ionization energy loss (dE/dx). The pion fraction decreases from above 90% at 400 MeV/c to 55% at 6 GeV/c. Our results for kaon production require that a large number of kaons are produced by strange quarks pulled from the vacuum. We have also measured R, the ratio of the total hadronic cross section to the mu pair cross section. Our value for R is 3.7 with an uncertainty of 10%. This value is in agreement with the results of other experiments and with the predictions of the quark-parton model.

Report studying the water estuaries of Texas to properly manage and utilize these resources. Contains maps, data-collection methods, tables, and more.

GEOTHERM sample file contains 225 records for Colorado. Three computer-generated indexes are found in appendices A, B, and C of this report. The indexes give one line summaries of each GEOTHERM record describing the chemistry of geothermal springs and wells in the sample file for Colorado. Each index is sorted by different variables to assist the user in locating geothermal records describing specific sites. Appendix A is sorted by the county name and the name of the source. Also given are latitude, longitude (both use decimal minutes), township, range, section, GEOTHERM record identifier, and temperature (/sup 0/C). Appendix B is sorted by county, township, range, and section. Also given are name of source, GEOTHERM record identifier, and temperature (/sup 0/C). Appendix C is first sorted into one-degree blocks by latitude, and longitude, and then by name of source. Adjacent one-degree blocks which are published as a 1:250,000 map are combined under the appropriate map name. Also given are GEOTHERM record identifier, and temperature (/sup 0/C). A bibliography is given in Appendix D.

The ionic compositions of 18 brines used in nuclear waste-related laboratory tests or obtained from field tests are described and compared. Also described are the origin of each brine, its predominant use for laboratory testing, and its relavancy for future testing. The brines include Brines A and B (Waste Isolation Pilot Plant (WIPP)/generic), Office of Nuclear Waste Isolation (ONWI) Composite Permian Brine P and Equilibrated Permian P No. 2, Battelle Pacific Northwest Laboratory (PNL)-Sandia High-Level Waste (HLW) package interactions test brines (flow and downhole), ERDA-6 brines (flow and downhole), WIPP Inclusions No. 1 and No. 2, Materials Characterization Center (MCC) brine, German quinare Brine Q, US Geological Survey bittern NBT-6a, saturated NaCl (20/sup 0/ and 100/sup 0/C), and standard seawater.

Report issued by the National Bureau of Standards over studies conducted on vapor compression cycles. Methods of operation are discussed. This report includes graphs, illustrations, and photographs.