The evolution of the density profile in PLT during intense gas puffing is documented and analyzed. Measurements of the spectrum of low energy edge neutrals and of the change in central neutral density indicate that charge-exchange processes alone cannot account for the central density rise. The transient density profile changes can be reproduced numerically by a diffusivity of approx. 10/sup 4/ cm/sup 2//s, and a spatially averaged inward flow of 10/sup 3/ cm/s. These transport coefficients are 10 ..-->.. 10/sup 2/ times larger than neoclassical. The ion energy confinement is reduced, the small scale density fluctuations are increased, and runaway electrons losses are increased during the density rise.

Fermilab's p anti p project is described, with emphasis on the anti p source. A detailed comparison is made with the design goals and accomplishments of the CERN p anti p project.

In support of Unresolved Safety Issue, USI A-43, Containment emergency Sump Performance, 8 additional nuclear power plants (representative of different US reactor manufacturers and architect-engineers) were surveyed to identify and document the types and amounts of insulation used, location within containment, components insulated, material characteristics, and methods of installation and attachment. These plants were selected to obtain survey information on older plants and supplements information previously reported in NUREG/CR-2403. In addition, a preliminary assessment was made of the potential for migration to the emergency sump of the insulation debris which might be generated as a result of the postulated loss-of-coolant accident (pipe break).

The Lawrence Livermore National Laboratory (LLNL) has an active interest in the synthesis of new polysiloxanes as base polymers for cellular silicone materials. These elastomers have properties uniquely suited to very specific engineering requirements. While the polymers which we have prepared via random equilibrium of various cyclic tetrasiloxanes have adequate properties for certain applications, there is evidence to suggest that alternating block polysiloxanes prepared via condensation-polymerization techniques have properties more suited to our end uses as flexible foam materials (cushions). The synthetic sequence developed to prepare these materials involves reactions of functionally terminated (silylamino and silanol) polysiloxane oligomers to produce alternating multiblock (ABAB...) materials of high molecular weight. Dialkylamines are condensation byproducts in this reaction. The analysis and characterization of these multiblock polymers is reported.

This final technical report covers the work performed between September 1, 1980 and November 30, 1981 relating to Chem Systems' Liquid Phase Methanation/Shift Process. A total of 44 runs were completed covering testing of five commercially available catalysts at 900/sup 0/F, 1000 psig and 10,000 h/sup -1/ VHSV. The shifted methanation feed gas consisted of 63% H/sub 2/, 19% CO, 2% CO/sub 2/ and 16% CH/sub 4/. To determine the effects of steam, twenty of the scans had 15% steam injected into the feed gas. Each test ran for 100, 300, 600 or 1200 hours with continuous effluent sampling and temperature profile monitoring. At each of the termination points, a catalyst sample was taken from the hot spot section of the bed for analysis. Carbon was deposited on the catalyst under the methanation conditions studied. The rate of carbon deposition was primarily a function of catalyst properties and not of the thermodynamics of the methanation reaction system. In spite of heavy carbon deposition, the catalytic behavior for these systems generally remains unaffected. Physical plugging of the catalyst bed is the limiting condition of the process and not catalyst deactivation. In this respect, a controlled oxidation of the carbon deposits is …

Glass marbles and ceramic pellets have been developed at Pacific Northwest Laboratory as part of the multibarrier concept for immobilizing high-level radioactive waste. These consolidated waste forms served as substrates for the application of various inert coatings and as ideal-sized particles for encapsulation in protective matrices. Marble and pellet formulations were based on existing defense wastes at Savannah River Plant and proposed commercial wastes. To produce marbles, glass is poured from a melter in a continuous stream into a marble-making device. Marbles were produced at PNL on a vibratory marble machine at rates as high as 60 kg/h. Other marble-making concepts were also investigated. The marble process, including a lead-encapsulation step, was judged as one of the more feasible processes for immobilizing high-level wastes. To produce ceramic pellets, a series of processing steps are required, which include: spray calcining - to dry liquid wastes to a powder; disc pelletizing - to convert waste powders to spherical pellets; sintering - to densify pellets and cause desired crystal formation. These processing steps are quite complex, and thereby render the ceramic pellet process as one of the least feasible processes for immobilizing high-level wastes.

Seven experimental fracture stimulation treatments completed to date and the laboratory work performed to develop the stimulation technology are described. A discussion of the pre-stimulation and post-stimulation data and their evaluation is provided for each experiment. Six of the seven stimulation experiments were at least technically successful in stimulating the wells. The two fracture treatments in East Mesa 58-30 more than doubled the producing rate of the previously marginal producer. The two fracture treatments in Raft River and the two in Baca were all successful in obtaining significant production from previously nonproductive intervals. However, these treatments failed to establish commercial production due to deficiencies in either fluid temperature or flow rate. The acid etching treatment in the well at The Geysers did not have any material effect on producing rate.

Two liquid samples from the Three Mile Island Unit 2 (TMI-2) Reactor Coolant System (RCS) and three liquid samples from the three Reactor Coolant Bleed Tanks (RCBT) were taken during the time period March 29, 1979 to August 14, 1980. The samples were analyzed for radionuclide concentrations by two independent laboratories, Exxon Nuclear Idaho Co., Inc. (ENICO) and EG and G Idaho, Inc. at the Idaho National Engineering Laboratory (INEL). The RCS sample taken on March 29, 1979 was also analyzed by Science Applications, Inc. (SAI). This report presents the methods used and the results of these analyes. 14 tables.

Rising interest in the nuclear physics community in a GeV C.W. electron accelerator reflects the growing importance of high-resolution short-range nuclear physics to future advances in the field. In this report major current problems are reviewed and the details of prospective measurements which could be made with a GeV C.W. electron facility are discussed, together with their impact on an understanding of nuclear forces and the structure of nuclear matter. The microtron accelerator has been chosen as the technology to generate the electron beams required for the research discussed because of the advantages of superior beam quality, low capital and operating cost and capability of furnishing beams of several energies and intensities simultaneously. A complete technical description of the conceptual design for a 2 GeV double-sided C.W. electron microtron is presented. The accelerator can furnish three beams with independently controlled energy and intensity. The maximum current per beam is 100 ..mu..amps. Although the precise objective for maximum beam energy is still a subject of debate, the design developed in this study provides the base technology for microtron accelerators at higher energies (2 to 6 GeV) using multi-sided geometries.

The safety characteristics of the high-temperature gas-cooled reactor (HTGR) during normal and accident conditions are determined in part by HTGR fuel performance. During normal operation, less than 0.1% fuel failure occurs, primarily from defective particles. This low fuel failure fraction limits circulating activity to acceptable levels. During severe accidents, the radiological consequence is influenced by high-temperature fuel particle behavior. An empirical fuel failure model, supported by recent experimental data, is presented. The onset of significant fuel particle failure occurs at temperatures in excess of 1600/sup 0/C, and complete fuel failure occurs at 2660/sup 0/C. This indicates that the fuel is more retentive at higher temperatures than previously assumed. The more retentive nature of the fuel coupled with the high thermal capacitance of the core results in slow release of fission products from the core during severe accidents.

The dynamics of space charge neutralization at the front of an intense self-focused electron beam pulse exhibits important differences in different gas pressure regimes. At very low pressures, the beam front is in the so-called ion-focused regime (IFR) where all secondary electrons are expelled from the beam region by the radial electric field without causing significant additional ionization. We estimate the upper pressure boundary of this regime by considering the distance scale length for cascade (avalanche) ionization. Data from the FX-25 diode experiments indicate a critical transition pressure (P/sub c/) that agrees with this estimate and with its scaling among various gas types. Normal mobility-limited treatments (local conductivity models) of the secondary electrons at the beam front are not justified until the gas pressure is 10 to 50 times higher than P/sub c/, due to runaway of these secondary electrons in the strong space-charge electric field at the lower pressures. The main conclusion of this study is that a non-local phase space (Boltzmann) treatment of the secondary electrons is required to accurately describe these different beam front regimes and the transitions between them; such a code model is currently under development.

This report summarizes research and development effort in support of the Inertial Confinement Fusion program, including absorption measurements with an integrating sphere, generation of high CO/sub 2/-laser harmonics in the backscattered light from laser plasmas, and the effects of hydrogen target contamination on the hot-electron temperature and transport. The development of new diagnostics is outlined and measurements taken with a proximity-focused x-ray streak camera are presented. High gain in phase conjugation using germanium was demonstrated, data were obtained on retropulse isolation by plasmas generated from metal shutters, damage thresholds for copper mirrors at high fluences were characterized, and phase conjugation in the ultraviolet was demonstrated. Significant progress in the characterization of targets, new techniques in target coating, and important advances in the development of low-density, small-cell-size plastic foam that permit highly accurate machining to any desired shape are presented. The results of various fusion reactor system studies are summarized.

The objective of this study was to define and quantify cost reductions in the Martin Marietta Denver Aerospace Second Generation Heliostat resulting from design and cost optimization. These cost reductions were based on optimizing the heliostat performance vs. cost and engineering design, and reviewing the design specification in selected technological areas with a goal of removing nonrealistic requirements and eliminating or minimizing overdesign. Specific technological areas investigated were: (1) designing the heliostat for survival strength rather than stiffness and reducing the operational wind requirements as dictated by this design approach; (2) reducing the pointing accuracy and/or beam quality required for some fraction or all of the heliostat field; (3) modifying the operational temperature range; (4) relaxing the rate at which the heliostat must move in the slew mode; (5) using alternate beam safety strategies; (6) analyzing actual wind data for selected sites in the southwest United States vs. the heliostat design specification survival wind requirements; (7) estimating heliostat damage for winds in excess of the design specification over a 30 year period; (8) evaluating the impact of designing the heliostat for higher wind loads; and (9) investigating the applicability to heliostat design of the standard engineering practices for designing buildings.

The low-cost replacement cable consists of a 510 foot roll of 19 pair twisted shielded cable with each end terminated by a standard AMP mass termination connector. The cable tested out and was installed with no irregularities or problems. The termination procedure is plotted. (LEW)

This commercial scale test, known as the M-1 Project, is located in Crawford County, Illinois. It encompasses 407 acres of Robinson sand reservoir and covers portions of several waterflood projects that were approaching economic limit. The project includes 248 acres developed on a 2.5-acre five-spot pattern and 159 acres developed on a 5.0-acre five-spot pattern. Development work commenced in late 1974 and has previously been reported. Micellar solution (slug) injection was initiated on February 10, 1977, and is now completed. After 10% of a pore volume of micellar slug was injected, injection of 11% pore volume of Dow 700 Pusher polymer was conducted at a concentration of 1156 ppM. At the end of this reporting period, 625 ppM polymer was being injected into the 2.5-acre pattern and 800 ppM polymer was being injected into the 5.0-acre pattern. The oil cut of the 2.5-acre pattern has decreased from 11.0% in September 1980, to 7.9% in September 1981. The 2.5-acre pattern had been on a plateau since May 1980, and as of May 1981 appears to be on a decline. The oil cut of the 5.0-acre pattern has increased from 5.9% in September 1980, to 10.9% in September 1981. The 5.0-acre pattern …

Materials deform faster under stress in the presence of irradiation by a process known as irradiation creep. This phenomenon is important to reactor design and has been the subject of a large number of experimental and theoretical investigations. The purpose of this work is to review the recent experimental results to obtain a summary of these results and to determine those research areas that require additional information. The investigations have been classified into four subgroups based on the different experimental methods used. These four are: (1) irradiation creep using stress relaxation methods, (2) creep measurements using pressurized tubes, (3) irradiation creep from constant applied load, and (4) irradiation creep experiments using accelerated particles. The similarity and the differences of the results from these methods are discussed and a summary of important results and suggested areas for research is presented. In brief, the important results relate to the dependence of creep on swelling, temperature, stress state and alloying additions. In each of these areas new results have been presented and new questions have arisen which require further research to answer. 65 references.

This paper describes the cooldown and testing of the first yin-yang magnet for the Mirror Fusion Test Facility. The introduction describes the superconducting magnet; the rest of the paper explains the tests prior to and including magnet cooldown and final acceptance testing. The MFTF (originally MX) was proposed in 1976 and the project was funded for construction start in October 1977. Construction of the first large superconducting magnet set was completed in May 1981 and testing started shortly thereafter. The acceptance test procedures were reviewed in May 1981 and the cooldown and final acceptance test were done by the end of February 1982. During this acceptance testing the magnet achieved its full design current and field.

Diffuse reflectance infrared spectra of a variety of different organic compounds have been determined. Profiles of the spectra along with the location and relative intensity of the principal bands have been included for each compound studied. In addition both diffuse reflectance and transmittance infrared spectra were obtained for the same samples, and the spectral results were compared. Although some minor variations are observed between a diffuse reflectance spectrum and the corresponding transmittance spectrum, the diffuse reflectance is quite useful and may be a superior technique for the study of many samples because it possesses an inherently higher signal-to-noise response, requires less sample preparation and allows a very wide range of samples (solids, liquids of low volatility, neat sample, or sample diluted in a reflecting medium) to be studied under very similar conditions.

The technology for producing an LLNL-developed polymer, L97KVB, has been transferred to a commercial speciality silicones manufacturer, McGhan-NuSil Corporation. Workers there have demonstrated both on a small scale and on a 200 lb. scale that they can produce a polymer which meets our analytical specifications and which will also perform satisfactorily in our load deflection and compression set tests.

Two water-cooled isobutane condensers, one with 2 tubes and one with 40 tubes, were subjected to field tests at the East Mesa Geothermal Test Site to assess relative heat transfer performance in both surface evaporator and direct-contact evaporator modes. The five groups of tests established that field performance was below earlier laboratory-determined levels and that direct-contact evaporator mode performance was poorer than that for the surface evaporator mode. In all test situations, fluted condenser tubes performed better than smooth condenser tubes. Cooling water quality had no significant effect on performance, but brine preflash in the direct-contact mode did promote some relative performance improvement. Important implications of these results for binary geothermal power plants are that (1) working-fluid-side impurities can significantly degrade heat transfer performance of the power plant condensers and (2) provisions for minimizing such impurities may be required.

Electrostatic ion cyclotron turbulence and the formation of ion conics at low altitudes (approx. = 1500 km) along auroral field lines have been investigated analytically and by plasma numerical simulations. Ion cyclotron waves are assumed to be driven unstable by the up-going cold ionospheric electrons associated with the downward auroral current. When the electron drift speed is comparable to the electron thermal speed, it is found that the large amplitude, e phi/T/sub e/ approx. = 1, coherent, ..omega.. = ..cap omega../sub i/, ion cyclotron waves shoudl exist along auroral field lines at low altitudes extending approx. = 500 to 1000 km. Ion conics are associated with the cyclotron turbulence and the ion bulk temperature is found to increase a factor of 10 of the initial ionospheric temperature, while the temperature of the high energy tail can be as much as a factor of 100 of the ionospheric temperature. Theory and simulations agree well.

Thermal conductivity plays an important part in the response of aqueous foams used as geothermal drilling fluids. The thermal conductivity of these foams was measured at ambient conditions using the thermal conductivity probe technique. Foam densities studied were from 0.03 to 0.2 g/cm/sup 3/, corresponding to liquid volume fractions of the same magnitude. Microscopy of the foams indicated bubble sizes in the range 50 to 300 ..mu..m for nitrogen foams, and 30 to 150 ..mu..m for helium foams. Bubble shapes were observed to be polyhedral at low foam densities and spherical at the higher densities. The measured conductivity values ranged from 0.05 to 0.12 W/m-K for the foams studied. The predicted behavior in foam conductivity caused by a change in the conductivity of the discontinuous gas phase was observed using nitrogen or helium gas in the foams. Analysis of the probe response data required an interpretation using the full intergral solution to the heat conduction equation, since the thermal capacity of the foam was small relative to the thermal mass of the probe. The measurements of the thermal conductivity of the foams were influenced by experimental effects such as the probe input power, foam drainage, and the orientation of the …

The state of knowledge about utilization of solution-mined salt cavities for CAES including laboratory experiments, numerical modeling, field characterization, solution mining experience, and operating parameters is outlined in this report. Topics evaluated in recent studies include: cavern geometry and size; long-term creep and creep rupture of rock salt; effects of pressure and temperature loading rates; low frequency fatigue; progressive deterioration of salt fabric with possible air penetration; cavern monitoring methods; and salt properties at nonambient conditions. Currently, the only CAES operational facility in the world is located at Huntorf, West Germany. This CAES facility uses two solution-mined salt caverns for air storage and has been operating successfully for more than 2 years. Stability criteria for solution-mined salt caverns from the Huntorf facility and recent field and laboratory studies are included in this report.

Reduced instrument responses are presented for Thermal-Hyraulic Test Facility (THTF) Test 3.06.6B. This test was conducted by members of the Oak Ridge National Laboratory Pressurized-Water-Reactor (PWR) Blowdown Heat Transfer (BDHT) Separate-Effects Program on August 29, 1980. The objective of the program was to investigate heat transfer phenomena believed to occur in PWR's during accidents, including small and large break loss-of-coolant accidents. Test 3.06.6B was conducted to obtain transient film boiling data in rod bundle geometry under reactor accident-type conditions. The primary purpose of this report is to make the reduced instrument responses for THTF Test 3.06.6B available. Included in the report are uncertainties in the instrument responses, calculated mass flows, and calculated rod powers.