Impurities in the Tandem Mirror Experiment (TMX) have been studied using extreme ultraviolet spectroscopy. Three time-resolving absolutely-calibrated normal-incidence monochromators, one on each section of TMX, were used to study the impurity emissions in the wavelength range of 300 A to 1600 A. The instruments on the east end cell and central cell were each capable of obtaining spatially-resolved profiles from 22 chords of the plasma simultaneously while the instrument on the west end cell monitored the central chord. The impurities identified in TMX were carbon, nitrogen, oxygen, and titanium. Emphasis was placed upon determining the impurity densities and radiated power losses of the central cell; results indicate that the impurity concentrations were low - less than 0.4% for each species - and that less than 10% of the total net trapped neutral beam power was lost to radiation. The use of titanium gettering on the central cell walls was observed to decrease the brightnesses of singly- and doubly-ionized carbon and oxygen in the central cell plasma. In the end cells, oxygen was the main impurity with a concentration of about 1.5% and was injected by the neutral beams; the other impurities had concentrations of about 0.5%. Radiation losses from the …

Ion cyclotron resonance heating (ICRH) was evaluated and it was found to be satisfactory for use in establishing the conditions necessary to form a thermal barrier in TMX-upgrade (TMX-U). We discuss the constraints that must be satisfied in order to maintain a plasma, and outline a complete startup scenario that ends with the plasma at design parameters. The detailed discussions in this report concentrate on those parts of startup where ICRH is necessary. The ability of ICRH to couple power into a plasma at the fundamental ion cyclotron resonance, w/sub ci/, is determined from experiments with a half-turn loop antenna in the Phaedrus tandem mirror central cell. From these experiments, we get the empirical scaling that shows power deposited in the plasma is proportional to the plasma density.

The Savannah River Plant has 28 ponds and 190 Carolina Bays on its 192,000-acreite. Excluding the Par Pond system, the mean pond area is 17.6 acre, with a range of 0.4 to 202.8 acres. Par Pond is the largest pond, with an area of 2500 acres. The mean Carolina Bay area is 6.6 acres, with a range of less than 0.3 to 124.0 acres. The geographical location of each pond and bay has been digitized and can be graphically displayed by computer. This capability will facilitate identification of wetland areas as required by Executive Order 11990 (Protection of Wetlands, May 24, 1977).

Geothermal development in The Geysers KGRA has affected local public services and fiscal resources in Sonoma, Lake, Mendocino, and Napa counties. Each of these counties underwent rapid population growth between 1970 and 1980, some of which can be attributed to geothermal development. The number of workers currently involved in the various aspects of geothermal development in The Geysers is identified. Using three different development scenarios, projections are made for the number of power plants needed to reach the electrical generation capacity of the steam resource in The Geysers. The report also projects the cumulative number of workers needed to develop the steam field and to construct, operate, and maintain these power plants. Although the number of construction workers fluctuates, most are not likely to become new, permanent residents of the KGRA counties. The administrative and public service costs of geothermal development to local jurisdictions are examined and compared to geothermal revenues accruing to the local governments. Revenues do not cover the immediate fiscal needs resulting from increases in local road maintenance and school enrollment attributable to geothermal development. Several mitigation options are discussed, and a framework is presented for calculating mitigation costs per unit of public service.

The following information about the Savannah River is tabulated: significant activities and discharges along the Savannah River, river water temperature data near Jackson st Savannah River Plant, flow informatiom, and reservoir parameters for Clarks Hill, Richard B. Russell and Hartwell reservoirs.

We are investigating the interactive process between turbulent flow and dispersed phase particles. We are focusing on the mechanisms that appear to result in a reduction of local turbulent intensity and a corresponding reduction in wall heat transfer and subsequent wall erosion in turbulent solid propellant combustion flow. We apply computational simulations and physical experiments specialized to a developing free shear layer over a rearward facing step and over a parallel splitter plate. The flow configuration evolves in a two-dimensional, steady, combustion and non-combustion turbulent free shear mixing region, with and without particle additives. The computational simulations combine three basic components: gas phase Navier-Stokes solutions, Lagrange particle field solutions and a Monte Carlo technique for the random encounters, forces and accelerations between the two fields. We concentrate here on relatively large sized additive particles (of the order of tens of microns to 100 microns mean diameter). We examine their apparent influence in breaking up the larger, energy bearing eddy structures into smaller structures which are more readily dissipated.

The Department of Energy and the Department of Defense are actively pursuing a program of nuclear weapons testing by underground explosions at the Nevada Test Site (NTS). Over the past 11 years, scores of tests have been conducted and the safety record is very good. In the short run, emphasis is put on preventing the release of radioactive materials into the atmosphere. In the long run, the subsidence and collapse of the ground above the nuclear cavities also are matters of interest. Currently, estimation of containment is based mostly on empiricism derived from extensive experience and on a combination of physical/mechanical testing and numerical modeling. When measured directly, the mechanical material properties are obtained from short-term laboratory tests on small, conventional samples. This practice does not determine the large effects of scale and time on measured stiffnesses and strengths of geological materials. Because of the limited data base of properties and in situ conditions, the input to otherwise fairly sophisticated computer programs is subject to several simplifying assumptions; some of them can have a nonconservative impact on the calculated results. As for the long-term, subsidence and collapse phenomena simply have not been studied to any significant degree. This report examines …

RINGBEARER II is a linearized monopole/dipole particle simulation code for studying intense relativistic electron beam propagation in gas. In this report the mathematical models utilized for beam particle dynamics and pinch field computation are delineated. Difficulties encountered in code operations and some remedies are discussed. Sample output is presented detailing the diagnostics and the methods of display and analysis utilized.

A dipole magnet, intended as a possible alternative for the ISABELLE main-ring magnet, was designed at LBL. Three layers of FNAL Doubler/Saver conductor were used. Two 1.3-m-long models were built and tested, both with and without an iron core, and in both helium I and helium II. The training behavior, cyclic energy loss, point of quench initiation, and quench velocity were determined. A central field of 6.5 tesla was obtained in He I (4.4 K), and 7.6 tesla in He II (1.8K).

A Q machine plasma target using cesium was constructed to serve as a target for a beam of Cs/sup +/ ions. The sum of charge transfer and ionization cross sections was determined by measuring the growth of the Cs/sup + +/ component of the beam as a function of the plasma radial line density. The measured cross section varies approximately linearly with energy between 50 and 110 keV. This loss cross section is 0.47 +- .11 x 10/sup -16/ cm/sup 2/ at 110 keV. These results have been compared to the cross section determined by a crossed-beam technique. The agreement between the results of the experiments is good at energies above 75 keV. A discrepancy between the results at lower energies indicated a systematic error in one of the techniques. Theoretical estimates of the cross section recently have begun to agree with the magnitude of the cross section but have not fully explained the energy dependence.

A hydrogeologic model of the Cerro Prieto geothermal field has been developed based on geophysical and lithologic well logs, downhole temperature, and well completion data from about 90 deep wells. The hot brines seem to originate in the eastern part of the field, flowing in a westward direction and rising through gaps in the shaly layers which otherwise act as partial caprocks to the geothermal resource.

This report was prepared to document the techniques being used to evaluate the neutron exposures received by personnel at the LLNL. Two types of evaluations are discussed covering the use of the routine personnel dosimeter and of the albedo neutron dosimeter. Included in the report are field survey results which were used to determine the calibration factors being applied to the dosimeter readings. Calibration procedures are discussed and recommendations are made on calibration and evaluation procedures.

In this project several mechanisms are proposed for radiation damage to DNA constituents and DNA, and a series of experiments utilizing electron spin resonance spectrometry to test the proposed mechanisms have been detailed. In the past studies have concentrated chiefly on the direct effect of radiation on DNA. We are currently investigating irradiated systems of DNA constituents which may shed light on indirect effects. In addition, studies of radiation effects on lipids have been undertaken which will shed light on the only other proposed site for cell kill, the membrane. Studies which we have completed during this year are: (1) ESR Study of Radicals Produced by One Electron Loss from 6-Azauracil, 6-Azathymine and 6-Azacytosine: Evidence for Both sigma and ..pi..-Radicals; (2) Hydrogen Abstraction Reactions by Amide Electron Adducts: A Comparison to Acid, Ester, Aldehyde and Ketone Electron Adducts. Studies which we have made progress on are: (3) An ESR and INDO Study of the ..pi..-Cations of 5-Hydroxymethyl-uracil and 5-Hydroxymethyl-cytosine: Evidence for Intramolecular Hydrogen Bonding; (4) Studies of the ..pi..-Cations of 5-Halouracils and 5-Halocytosines; (5) Studies of Radiation Damage to Lipids.

Bendix product applications require the capability of fabricating heavy gage, high strength materials. Five commercial sources have been identified that have the capability of spin forming metal thicknesses greater than 9.5 mm and four equiment manufacturers produce machines with this capability. Twelve assemblies selected as candidates for spin forming applications require spin forming of titanium, 250 maraging steel, 17-4 pH stainless steel, Nitronic 40 steel, 304 L stainless steel, and 6061 aluminum. Twelve parts have been cold spin formed from a 250 maraging steel 8.1 mm wall thickness machine preform, and six have been hot spin formed directly from 31.8-mm-thick flat plate. Thirty-three Ti-6Al-4V titanium alloy parts and 26 17-4 pH stainless steel parts have been hot spin formed directly from 31.8-mm-thick plate. Hot spin forming directly from plate has demonstrated the feasibility and favorable economics of this fabrication technique for Bendix applications.

The theoretical analysis of a high density Z-pinch (HDZP) begins with an examination of the steady state energy balance between ohmic heating and bremsstrahlung radiation losses for a plasma column in pressure equilibrium. The model is then expanded to include the time-varying internal energy and results in a quasi-equilibrium prescription for the load current through a constant radius plasma channel. This set of current waveforms is useful in the design of experimental systems. The behavior of a plasma for physically realizable conditions is first examined by allowing adiabatic changes in the column radius. A more complete model is then developed by incorporating inertial effects into the momentum equation, and the resultant global MHD computational model is compared with more sophisticated, and costly, one- and two-dimensional computer simulations. These comparisons demonstrate the advantages of the global MHD description over previously developed zero-dimensional models.

A number of spectrum lines arising from magnetic dipole transitions in the n = 3 shell ground configurations of molybdenum and zirconium ions have been identified. These lines are particularly suitable for spectroscopic diagnostics in tokamak-type plasmas in the 500 to 1500 eV temperature range.

The Axicell MFTF-B magnet system will provide the field environment necessary for tandem mirror plasma physics investigation with thermal barriers. The performance of the device will stimulate DT to achieve energy break-even plasma conditions. Operation will be with deuterium only. There will be 24 superconducting coils consisting of 2 sets of yin-yang pairs, 14 central-cell solenoids, 2 sets of axicell mirror-coil pairs, and 2 transition coils between the axicell mirror coil-pairs and the yin-yang coils. This paper describes the progress in the design and construction of MFTF-B Superconducting-Magnet System.

In addition to its other characteristics, the Nova Laser Fusion facility may well be the largest precision optical project ever undertaken. Moreover, during the course of construction, concurrent research and development has been successfully conducted, and has resulted in significant advances in various technical areas, including manufacturing efficiency. Although assembly of the first two beams of Nova is just commencing, the optical production, including construction of the special facilities required for many of the components, has been underway for over three years, and many phases of the optical manufacturing program for the first 10 beams will be completed within the next two years. On the other hand, new requirements for second and third harmonic generation have created the need to initiate new research and development. This work has been accomplished through the enormous cooperation DOE/LLNL has received from commercial industry on this project. In many cases, industry, where much of the optical component research and development and virtually all of the manufacturing is being done, has made substantial investment of its own funds in facilities, equipment, and research and development, in addition to those supplied by DOE/LLNL.

The emission of alpha particles in coincidence with the most deeply inelastic heavy-ion reactions has been studied for /sup 181/Ta/sup +/ /sup 165/Ho at 1354 MeV laboratory energy and /sup nat/Ag + /sup 84/Kr at 664 MeV. Alpha particle energy spectra and angular distributions, in coincidence with a projectile-like fragment, were acquired both in the reaction plane and out of the reaction plane at a fixed in-plane angle. The in-plane data for both systems are employed to show that the bulk of the alpha particles in coincidence with the deep-inelastic exit channel can be explained by evaporation from the fully accelerated fragments. Average velocity diagrams, ..cap alpha..-particle energy spectra as a function of angle in several rest frames, and ..cap alpha..-particle angular distributions are presented. The out-of-plane alpha particle angular distributions and the gamma-ray multiplicities are used to study the transfer and partitioning of angular momentum between the two fragments. For the /sup nat/Ag + /sup 84/Kr system, individual fragment spins are extracted form the alpha particle angular distributions as a function of mass asymmetry while the sum of the fragment spins is derived from the gamma-ray multiplicities. These data, together with the fragment kinetic energies, are consistent with rigid …

The next generation of accelerators for high-energy physics will require high-field, small-bore dipole magnets: in the region of 10 T and 40-mm diam. For such magnets, there is a great incentive to attain high overall current density through increasing the current density within the superconductor and minimizing the copper stabilizer. Both Nb-Ti operating at 1.8 K and Nb/sub 3/sn at 4.2 are candidate superconductors. Two programs in the US and one in Japan are directed toward the development of such magnets. The program at LBL is described below.

Major objectives in the process of developing a rugged portable instrument to evaluate dose and dose equivalent have been achieved. A tissue-equivalent proportional counter simulating a 2 micrometer spherical tissue volume has operated satisfactorily for over a year. The basic elements of the electronic system have been designed and tested. And finally, the most suitable mathematical technique for evaluating dose equivalent with a portable instrument has been selected. Design and fabrication of a portable prototype, based on the previously tested circuits, is underway.

Measurements of line integrated emission profiles of D/sub ..beta../, OIII, OV, OVI, and CV line radiation have been performed in the ZT-40M device at Los Alamos National Laboratory. The behavior of these emission profiles will be presented for several operating currents, fill pressures, and current risetimes. The basic oxygen radial structures are seen to resemble an onion skin at any particular time, with OIII farthest out in radius and OVI nearest the axis, as one would expect in the absence of any anomalous heating mechanisms (such as thermal instabilities). The rate at which the various lines occur during several different current level discharges appears to be consistent with increased losses for increased I/sub phi/ during the early phases of heating (up to OVI), while the later stages are consistent with a much lower energy loss and a heating rate proportional to I/sup 2/. Evidence of enhanced wall interaction in the latter stages of the discharge is presented.

A new system of detectors (MPS II) which has been installed and operated in the Brookhaven National Laboratory Multiparticle Spectrometer (MPS), consisting of short drift distance drift chambers is briefly described. (WHK)

The sulfur-iodine water-splitting cycle is characterized by the following three reactions: 2H/sub 2/O + SO/sub 2/ + I/sub 2/ ..-->.. H/sub 2/SO/sub 4/ + 2HI; H/sub 2/SO/sub 4/ ..-->.. H/sub 2/O + SO/sub 2/ + 1/2 O/sub 2/; and 2HI ..-->.. H/sub 2/ + I/sub 2/. This cycle was developed at General Atomic after several critical features in the above reactions were discovered. These involved phase separations, catalytic reactions, etc. Estimates of the energy efficiency of this economically reasonable advanced state-of-the-art processing unit produced sufficiently high values (to approx.47%) to warrant cycle development effort. The DOE contract was largely directed toward the engineering development of this cycle, including a small demonstration unit (CLCD), a bench-scale unit, engineering design, and costing. The work has resulted in a design that is projected to produce H/sub 2/ at prices not yet generally competitive with fossil-fuel-produced H/sub 2/ but are projected to be favorably competitive with respect to H/sub 2/ from fossil fuels in the future.