Report regarding an airborne gamma-radioactivity survey that took place in the 2,800 square mile area around the Los Angeles region in California. Topics include the types of bedrock noted in the area as well as their levels of radioactivity.

Abstract: "The pressure drop and the time-temperature variation of the air test medium and heat storage material in a pebble-bed heater (designed for intermittent hypersonic wind-tunnel operation at test section Mach numbers of 4 to 11) are presented."

BAND-1 is an IBM-704 program to reduce the experimental data obtained from measurements of the neutron activation distribution within a critical facility. The data reduction consists of correcting the measured data, sorting and ordering it, and calculating the critical buckling parameters by means of a least squares analysis. (auth)

The Bevatron operated an average of 80% of the scheduled operating time with the exception of one 5-day shutdown period for emergency maintenance of the motor generator sets. The machine was shut off l9% of the scheduled operating time because of component failure and 1% at the request of the user. During and following the Christmas shutdown period an ultrasonic inspection was made of the flywheel keyway on each of the motor generator sets. No faults were apparent. Charpy samples were taken from the inspection bore in the flywheels. Subsequent"vee notch" Charpy impact tests indicated that the flywheels are operated in a brittle region rather than in the ductile range expected. The research program again was devoted mainly to study of pi - and K-meson interactions. (auth)

Separate abstracts were prepared for 43 sections of this report. (C.H.)

A carrier-free separation of hafnium from several hundred milligrams of rare earth oxides by anion exchange from saturated HC1 solution is given. The procedure is completed in 4-8 hours and is suitable for remote control work.

A colorimetric method was developed for the determination of uranium(IV) in the presence of uranium(VI), nitric acid, hydroxylamine sulfate, and hydrazine. A coefficient of variation of 2.4% (n = 25) was obtained. (auth)

Graphical presentation of K-factors for eight isotherms, published data on the solid-vapor region, and a bibliography of approximately 450 references.

The variation in concentration of settled beds of flocculated aqueous suspensions of thoria was studied experimentally as a function of the calcination temperature and particle size of the thoria, the temperature and initial concentration of the suspension, and the concentration of added chromic acid. Values of the ultimate settled-bed concentration were obtained by several methods. Dilatant-plastic behavior of one suspension was considered responsible for the formation, in long vertical tubes, of intractable plugs. (auth)

ABS>A statistical evaluation is presented of field data including measurements of alpha activity on work surfaces, in the environmental air; and the results of urinalyses obtained from employees assigned to a UF/sub 6/ manufacturing facility. Two years are studied wherein personnel were subject to relatively low concentrations of both soluble and insoluble normal uranium compounds. Approximately 700 urine specimens were collected and 500 spot-air samples, 4000 shift-length air samples, and 24 surface surveys were made. Statistical correlations of these data are presented, and a method is proposed for estimating the exposure potential of employee groups working in environments having varying uranium concentrations. (auth)

In an attempt to increase the efficiency, a proton recoil neutron spectrometer was built in which the proton detection crystal is in the shape of the surface formed by the rotation of the cos/sup 3/ THETA curve about the THETA = 0 axis where THETA is the angle between the direction of travel of the incident neutron and the direction of travel of the recoil proton. Such a construction makes the detector crystal conform to the range envelope of the protons recoiling from a neutron beam of sufficiently high energy into a gas in which the proton range is proportional to the 3/2 power of the proton energy. Sixteen pieces of thallium-activated cesium iodide were assembled as a mosaic arranged in the cos/sup 3/ THETA shape so that the maximum THETA was 30 deg . Calculations show that 25% of the protons recoil within 30 deg . The Po-Be snd Po-B spectra were measured with the instrument using xenon in the chamber. The resolution of the spectra obtained was low due to nonuniform pulse height response of the CsI crystal sections and excessive gamma-ray response even though sn anthracene proton radiator was used in a coincidence scheme designed to minimize …

A guide is presented for problems involved in counting methods and techniques used in avoiding or correcting . them. Beta, alpha, and gamma counting is treated. Among the items discussed are the geometry factor, absorption, scattering, and background. A bibliography of 164 references is included. (D.J.C.)

The ACIR Library is composed of publications that study the interactions between different levels of government. This document addresses county areas of declining population, 1950-60.

BS>Critical studies of a fast reactor core containing a simulated oxide fuel having an oxygen-uranium atomic ratio of 1: 1 are described. Calculated and experimental critical masses are compared. Experimental results are given for fission ratio, central reactivity coefficient, fuel bunching, and distributed worth measurements. (auth)

Critical studies were made with a simulated, large, dilute power reactor having uranium carbide as fuel. The uranium in the core was 30.7% enriched, and the atomic ratio of uranium to carbon was 0.946. The critical mass was 503.01 kg U/sup 235/ and the critical volume 574.47 liters. Central reactivity coefficients, effective fission crosssection ratios, heterogeneity effects, reactivity worth of distributed materials, foil irradiations, and the average prompt neutron lifetime were measured. Multigroup calculations using the Yiftah, Okrent, and Moldauer crosssection set overestimated k for the critical configuration by 4.7%. (auth)

Monthly newsletter of the High Plains Underground Water Conservation District No. 1, discussing the field of underground water. Topics include profiles of water conservation research, annual pre-plant soil moisture survey data, annual Winter Water Level measurement data, and information about the latest water conservation tips.

"This bibliography lists selected books, articles, and unclassified reports which have appeared in the following abstracts and indexes between August 1959 and December 1960."

Design data for BORAX V are presented along with results of hazards evaluation studies. Considcration of the hazards associated with the operation of BORAX V was based on the following conditions: For normal steady-state power and experimental operation, the reactor and plant are adequately shielded and ventilated to allow personnel to be safely stationed in the turbine building and on the main floor of the reactor building. The control building is located one- half mile distant from the reactor building. For special, hazardous experiments, personnel are withdrawn from the reactor area. (M.C.G.)

Report describing the design and usage of the BORAX V nuclear reactor, its surrounding facility, systems, experimental programs, and possible hazards.

Introduction: Recently a new type of charged particle detector, the so-called spark chamber, has been developed. The detector has certain advantages in high energy physics over bubble chambers aside from its much lower cost.

A description is given of the design of a prototype "packaged" nuclear power plant. The purpose of the plant is to alleviate fuel oil logistics and storage problems posed by remote auxiliary DEW Line radar statibns north of the Arctic Circle. The ALPR (redesignated SL-1) is a 3 Mwt, heterogeneous, highly enriched uranium- fueled, naturalcirculation boiling water reactor, ccoled and moderated with light water. Steam at 300 psig, dry and saturated (421 deg F) is passed directly from the reactor to a conventional turbine-generator to produce electric power (300 kw nominal) and space-heating (400 kw) requirements consistent with rigid mechanical and structural specifications prescribed by the military, and dictated by the extreme geophysics prevailing at the ultimate site. The over all design criteria emphasize: simplicity and reliability of operation and maintenance, with minimum supervision; minimum on-site construction; maximum use of standard components; limited water supply; utilization of local gravel for biological shielding; transportability by air lift; and nominal 3-year fuel operating lifetime per core loading. The "packaged" concept is incorporated for the initial erection. The plant is not designed for relocation. The design criteria for the prototype necessitate special features. The fuel plates are clad with an alurninurn-nickel alloy (X8001). …

Report containing "[a] description (...) of the design of a prototype "packaged" nuclear power plant. The purpose of the plant is to alleviate fuel oil logistics and storage problems posed by remote auxiliary DEW Line radar stations north of the Arctic Circle. The ALPR (redesignated SL-1) is a 3 Mwt, heterogeneous, highly enriched uranium- fueled, natural-circulation boiling water reactor, cooled and moderated with light water. Steam at 300 psig, dry and saturated (421 deg F) is passed directly from the reactor to a conventional turbine-generator to produce electric power (300 kw nominal) and space-heating (400 kw) requirements consistent with rigid mechanical and structural specifications prescribed by the military, and dictated by the extreme geophysics prevailing at the ultimate site. The over-all design criteria emphasize: simplicity and reliability of operation and maintenance, with minimum supervision; minimum on-site construction; maximum use of standard components; limited water supply; utilization of local gravel for biological shielding; transportability by air lift; and nominal 3-year fuel operating lifetime per core loading." (p. 15)

"The laboratory experiments and field testing which were carried out in the development of a homogeneous gas labeling device are described. Detailed drawings of the injector and its most critical components are included. Recommendations are made for a production model of the device along with estimated costs of construction."

Control of the exit temperature of the coolant from each fuel channel of the Hallam Nuclear Power Facility reactor is obtained by adjusting the coolant flow rate by a remotely operated variable orifice. Two variable orifices were designed and the hydraulic characteristics determined. Both orifice designs utilized a tapered plug moving in and out of a restricted flow passage at the upper end of the fuel channel. Data were obtained on pressure drop as a function of flow rate at different orifice plug positions; all measurements were made using water, and data were converted to equivalent values for sodium. Either type of orifice was capable of adjusting flow rate to match the power output of a fuel element at any location in the reactor core. The temperature sensitivity (change in exit temperature per unit change in orifice plug position) of the first type of orifice was low (lO deg F/in.) when used in combination with a central fuel element, and high (7OO deg F/in.) when used with a peripheral element. The temperature sensitivity of the second type was more uniform (varying from 90 to 250 deg F/ in.). Consequently, the second type of orifice was selected for the HNPF. (auth)