For presentation at the American Chemical Society's Nuclear Technology Symposium, Boston, Apr. 5-10, Information is presented from studies with materials and conditions simulating those expected in anm aqueous homogeneous reactor for the formation of insoluble corrosion and fission products in aqueous UO/sub 2/ SO/sub 4/ solutions used as a reactor fuel. Sulfate salts which become insoluble as the temperature inereases deposited preferentially and reversibly on hot walls. Oxides from hydrolysis of sulfate salts deposit on any surfaces while insoluble corrosion products released into the solution show variable degrees of circulation. (auth)

As part of the over-all program of investigation of the rheological properties of aqueous thorium oxide slurries, a capillary-tube viscometer was designed for routine determiation of shear diagrams of slurries over a temperature range of 30 to 85 deg C. A particular feature of this viscometer is the vertical oricntation of the capillary tube which minimizes the effect on the results obtained with dilate, rapidly settling slurries. (auth)

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Will Wilson, regarding a legal question submitted for clarification: Should the Secretary of State accept and file Articles of Incorporation in which the corporate name includes one of the words, "discount," "rediscount," "guaranty," or "surety," and related questions.

The head-end system for the ARE salt was tested with barren salt and shown to be operable. Transfer of the final batch of salt by gravity flow from the bold tank was shown to be feasible with a redesigned feed salt freeze valve. The CRP trap was also redesigned but the remote dumping mechanism did not function properly. (auth)

Abstract: "An absolute measurement of the 14.1-Mev (n, 2n) cross sections of Li-6 and Li-7 has been made using the large scintillator technique, resulting in cross sections in barns of 0.070 +/- 0.006 and 0.056 +/- 0.005 for Li-6 and Li-7, respectively."

None

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Will Wilson, regarding a legal question submitted for clarification: The authority of the Secretary of State to approve a charter for corporations having as their purpose the issuance of bail bonds.

"A study has been made of a flare-cylinder configuration to investigate its feasibility as a reentry body of an intermediate range ballistic missile. Factors considered were heating, weight, stability, and impact velocity. A series of trajectories covering the possible range of weight-drag ratios were computed for simple truncated nose shapes of varying pointedness, and hence varying weight-drag ratios" (p. 1).

Various heat transfer mechanisms which have been previously proposed are analyzed in the light of recent experiments. Evidence is presented in favor of a liquid-vapor exchange mechanism and against the widely accepted "micro-convection" mechanism. The vapor-liquid exchange rnechanism is shown to explain the insensltivity of boiling heat flux to the level of subcooling. A "Reynolds Analogy" for nucleate boiling is presented in some detail. A procedure is given for calculating the superheat at which the liquid bulk velocity ceases to contribute to the heat flux. An expression for the growth of a vapor bubble in a highly superheated liquid is deduced. A method is presented which allows the deduction of correlations for nucleate boiling which give the dependence of heat flux on superheat and system pressure. Two such correlations are presented and results are compared with experiment. It is shown that one correlation yields the heat flux for different liquids varying from water to mercury, without necessitating any change in constant or exponent of the correlation. (auth)

Memorandum presenting an investigation of hemispherical nose shapes of titanium, stainless steel coated with aluminum oxide, and uncoated stainless steel with lithium hydride and magnesium as internal coolants. Results regarding titanium models, stainless-steel models (uncoated), stainless-steel models coated with aluminum oxide, solution effects on the decomposition temperature of lithium hydride, effect of lithium hydride and magnesium on temperature measurements, and efficiency of models cooled with lithium hydride are provided.

Report presenting testing of hemispherical nose shapes of titanium, stainless steel coated with aluminum oxide, and uncoated stainless steel with lithium hydride and magnesium as internal coolants. The models were tested in the ceramic-heated jet at a Mach number of 2, a stagnation temperature of 4,000 degrees Fahrenheit, and a stagnation pressure of 105 lb/sq. in. abs. Lithium hydride offers significant cooling for the materials while magnesium shows a slight cooling.

"The mean strain rate in turbulent shear flow must tend to make the structure anisotropic in all parts of the spectrum. It is argued here, however, that if the spectral energy transfer process destroys orientation, the Kolmogoroff notion of local isotropy can still be justified in spectral regions where the local transfer time is shorter than the characteristics time of the gross shear strain" (p. 1).

An investigation of trim from the HRP Dump Valve Test Loop revealed that performance improved with increasing poppet hardness. From this it was hypothesized that deformation of softer poppets increased the poppet-seat contact area, thus reducing the closing pressure. The deformation areas of a number of poppets were measured and the closing pressures calculated. A plot of closing pressure against leak rate showed a fair correlation and tends to support the hypothesis. (auth)

Small metal spheres of various densities were fired at high speed into thick targets of copper and lead. In general, it was found that all of the penetrations could be correlated quite well for engineering purposes by a function relating the depth of penetration to the impact momentum per unit volume.

Memorandum presenting force-oscillation tests made in the 8-foot transonic pressure tunnel to investigate some effects of an overhang-type aerodynamic balance and of a flow spoiler on the dynamic hinge-moment characteristics of a full-span flap-type rudder on a 5-percent-thick, swept vertical fin of low aspect ratio. Test results how that the aerodynamic damping moment on the plain rudder becomes unstable near a Mach number of 0.975 and remains unstable to the maximum speed of the tests.

Report presenting force-oscillation testing in the transonic pressure tunnel to investigate some effects of an overhang-type aerodynamic balance and of a flow spoiler on the dynamic hinge-moment characteristics of a full-span flap-type rudder on a 5-percent-thick, swept vertical fin of low aspect ratio. Tests were performed at a variety of Mach numbers, reduced frequencies, and tunnel stagnation pressures, but at a constant oscillating amplitude. Results regarding aerodynamic damping, aerodynamic spring, control effectiveness, and effect of Reynolds number are provided.

A three-stage mass spectrometer that utilizes two consecutive magnetic focusing;lenses of 20-in. radii followed by a 20-in. radius-of-curvature electrostatic analyzer is described. An abundance sensitivity of 1010 was measurcd for this instrument in the low mass region. Application of this instrument to analytical and research problems in the field of mass spectrometry and the results obtained are discussed. (auth)

The accuracy with which the breeding ratio of HRE-3 could be determined after a period of reactor operation was investigated. Inaccuracies in measurement of the core U/sup 233/ inventory and blanket U/sup 233/ and Pa/sup 233/ inventories appear to be the major sources of error. Appreciable errors could result from attempting to determine these inventories by sampling the reactor contents. For example, if generalized attack on stainless steel is at a rate of 1.0 mpy and if the associated film of corrosion products is 1% uranium, failure to account for this fuel in evaluation of the core inventory would cause an error of about 5% in the breeding ratio. (auth)

An analysis of the temperature structure in the CCR-2 fuel elements and coolant stream at the position where the maximum fuel element surface temperature exists is presented. Results were obtained by numerical methods on the IBM 704 digital computer. The effect of variation in channel size is shown, and a method of data correlation is suggested. Preliminary conclusions are presented as to the effect of temperature structure on the design and testing of gas cooled reactor fuel element configurations. In view of the rate at which gas cooled reactor work is proceeding results of the calculations are being published in their current incomplete form. The study is continuing in an effort to refine the calculations, and experimental data will eventually be available with which to verify the analytical conclusions. (auth)

Program F/sub 3/ provides an anslysts of a three group, one-dimensionni reactor in multi-region slab or cylindrical geometry. Input consists of a description of the geometry of the assembly, energy group constants defining the nuclear characteristics of each region, and control information specifying the type of calculation desired. The fission density and neutron flux, computed at each lattice point, are used to calculate the reactivity of the system. (auth)

The reduction in HRE-3 breeding ratio resulting from neutron absorptions in the core-inlet line was examined for spherical and cylindrical cores; it was found to be less than 0.5% if the pipe does not extend more than 1/4 the way from the top to the bottom of the core. The power density at the end of the pipe would be 57 kw/l if it extended 5 in. into the sphere. (auth)

Commonwealth Edison Company for the purpose of supplementing the license application for the Dresden Nuclear Power Station submits herewith Amendment No.1 to the portion of the Final Hazards Summary Report entitled Preliminary Hazards Summary Report.

The study of interactions and decay of K mesons continued, using the 10- inch liquid hydrogen bubble chamber and emulsions. Four emulsion stacks were exposed for two internal groups and twenty-three stacks were exposed for seventeen groups from outside the Laboratory. Interactions of pi /sup -/ mesons were observed with a 30-inch propane bubble chamber and with emulsions. Ten emulsion stacks were exposed to neutral-particle beams and one stack to the internal 6.2-Bev proton beam. The 30-inch propane bubble chamber and emulsions were used to study the interactions of antiprotons. Eighteen target bombardments in the internal proton beam were made for the chemistry group. Successful tests were completed of two static-electromagnetic velocity spectrometers for the separation of highenergy particles. One was of coaxial construction, the other of parallel-plate construction. (For preceding period see UCRL-6114.) (auth)

Somewhere in the future lies the possibility that the existing HAPO reactors will no longer be required for the production of weapons grade plutonium. This could come about either through advances in technology or through changes in the requirements for this particular fissionable isotope as a weapons material. In any event, should these reactors no longer be utilized for plutonium production, it would be appropriate to consider the possibility of their conversion to other uses, notably that of electrical power production. Accordingly, this study has been made with the objective of investigating the economic and technological feasibility of such conversion. However, it must be recognized that the results presented herein are based on present day technology and economic philosophy and that within the next five years we may experience considerable renovation of these criteria which could alter the conclusions of the study appreciably. The primary benefit to be gained from this preliminary study is to narrow the area of future and more detailed investigation as much as possible so that if and when such a conversion appears likely, a significant fraction of the almost infinite number of combinations of reactor and power plant parameters may be rejected at the outset.