From Introduction: "This report presents the results of an analysis to determine the coolant flow and pressure requirements for a particular return-flow turbine rooter blade design utilizing hydrogen, helium, or air as the coolant."

From Introduction: "This paper presents results of an analysis of shear, bending-moment, and torque loads measured on the vertical tail during rudder-step, rudder-pulse, aileron-roll, and steady-sideslip maneuvers. In order to assess effects of Mach number and altitude, the maneuvers were performed at altitudes of 15,000, 25,000, and 35,000 feet and Mach numbers from 0.49 to 0.82."

Report presenting a flight-test program investigating a modification to an interceptor system. Results indicate that a significant improvement in the overall response characteristics of the system. The modification minimizes the interaction between the antenna and interceptor motions, which can have a serious influence on flight path stability during a lead-collision attack.

From Summary: "The primary objectives of the investigation reported herein were to determine the effect of this new combuster design on boric oxide deposition on engine parts and to determine the effect of boric oxide on the performance of multistage turbine. Pentaborance fuel (approx. 130 lb) was used in the engine performance evaluation reported herein. The data presented herein show the engine component and over-all performance deterioration with operation on pentaborane fuel".

From Summary: "An approximate analysis of the nonlinear effects of initial twist and large deflections on the torsional stiffness of a cantilever plate subjected to a nonuniform temperature distribution is presented. The Von Karman large-deflection equations are satisfied through the use of a variational principle. The results show that initial twist and applied moments can have significant effects on the changes in stiffness produced by nonuniform heating, particularly in the region of the buckling temperature difference. Results calculated by this approximate analysis are in satisfactory agreement with measured torsional deformations and changes in natural frequency."

"Static tensile test results are presented for specimens of 2014-T6, 2024-T4, 6061-T6, and 7075-T6 aluminum alloy containing fatigue cracks. The results are found to be in good agreement with the results reported for similar tests from other sources. The results indicate that the presence of a fatigue crack reduced the static strength, in all cases, by an amount larger than the corresponding reduction in net area; the 6061-T6 alloy specimens were least susceptible to the crack and the 7075-T6 alloy specimens were most susceptible" (p. 1).

"The theory of cascades, made up of a series of flat plates placed one behind the other, is extended to the case where the impinging stream is not uniform, and the deduced properties of this cascade-flow are then applied to the study of the wall interference between such as cascade-like boundary and a vortex-source type of singularity. It is shown that the induced velocities, produced by the presence of such a wall, are equal to what is obtained by action of a suitably chosen 'reflected' singularity situated on one side of the wall, together with the action of another suitably chosen 'transmitted' singularity placed on the other side" (p. 1).

"An investigation has been completed in the Langley 20-foot free-spinning tunnel on a l/18-scale model of the Ryan X-13 airplane to determine its spin, recovery, and tumbling characteristics, and to determine the minimum altitude from which a belly landing could be made in case of power failure in hovering flight. Model spin tests were conducted with and without simulated engine rotation. Tests without simulated engine rotation indicated two types of spins: one, a slightly oscillatory flat spin; and the other, a violently oscillatory spin" (p. 1).

"An investigation has been conducted in the Langley Unitary Plan Wind tunnel to determine the static stability and drag characteristics of a 1/10-scale model of the AVCO booster vehicle. The tests were made at a constant Reynolds number, based on maximum nose diameter, of 1.09 x 10(exp 6)6 at Mach numbers of 1.60 and 2.00" (p. 1).

A full-scale turbojet engine was operated with pentaborane fuel continuously for 22 minutes at conditions simulating flight at a Mach number of 0.8 at an altitude of 50,000 feet. This period of operation is approximately three times longer than previously reported operation times. Although the specific fuel consumption was reduced from 1.3 with JP-4 fuel to 0.98 with pentaborane, a 13.2-percent reduction in net thrust was also encountered. A portion of this thrust loss is potentially recoverable with proper design of the engine components. The boron oxide deposition and erosion processes within the engine approached an equilibrium condition after approximately 22 minutes of operation with pentaborane.

Memorandum presenting a study of the performance of swirl-can combustor elements for an experimental short-length turbojet combustor utilizing hydrogen fuel at high-altitude operating conditions. Fuel was injected into each element through a tangential, sonic orifice that created a swirling fuel-air mixture within each element. Results regarding combustor blowout, combustion efficiency, outlet temperature distribution, and preliminary performance of multielement combustor are provided.

Memorandum presenting a turbojet engine with a two-stage turbine operated with pentaborane fuel continuously for 11.5 minutes at a simulated altitude of 55,000 feet at a flight Mach number of 0.8. The engine incorporated an NACA combustor designed specifically for use with pentaborane fuel. Results regarding oxide formation and deposition, engine operating point, effect of oxide deposits on component performance, effect of oxide deposition on overall performance, and some operational comments are provided.

Report presenting an investigation of the ejection release characteristics of the MB-1 rocket from the missile bay of a model of the Convair F-106A airplane with its fin tips retracted at a simulated altitude of 18,670 feet. Successful ejections of the rocket were made at supersonic speeds by applying a combination of ejection velocity and nose-down pitching moment at release.

From Summary: "A statistical study is made of icing data reported from weather reconnaissance aircraft flown by Air Weather Service (USAF). The weather missions studied were flown at fixed flight levels of 500 millibars (18,000 ft) and 700 millibars (10,000 ft) over wide areas of the Pacific, Atlantic, and Arctic Oceans. This report is presented as part of a program conducted by the NACA to obtain extensive icing statistics relevant to aircraft design and operation. The thousands of in-flight observations recorded over a 2- to 4-year period provide reliable statistics on icing encounters for the specific areas, altitudes, and seasons included in the data."

Report discussing the performance of an experimental quarter-sector annular combustor at conditions simulating supersonic flight of a cooled-turbine engine, as well as 20 different modification to the design. The final configuration was found to show no structural failures and little or no warping of liner parts after 40 hours of operation.

Memorandum presenting an investigation of performance estimates of aircraft nuclear propulsion (ANP) systems. This paper includes a relation of current estimated ANP performance to the future requirements that nuclear propulsion systems will be required to meet.

Report presenting data to determine the component and overall engine performance up to an altitude limit for the J71-A-11 (600-B36) turbojet engine. Engine operation using JP-4 fuel at Mach number 0.8 was satisfactory up to an altitude of about 60,000 to 65,000 feet, and engine operation with marginal combustion stability was maintained to an altitude of about 80,000 feet. Results regarding the altitude operating limits, component performance, overall engine performance, contribution of individual component losses to overall engine performance losses, exhaust-nozzle-area requirements, and altitude performance at rated engine conditions are provided.

Report presenting an investigation of the ejection release characteristics of the MB-1 rocket from the missile bay of a Convair F-106A airplane. Results regarding pitching moment, ejections, release conditions, and missile trajectory are provided.

From Forward: "This report describes the present conceptions of the Experimental Breeder Reactor-II as well as the safety procedures and precautions which are currently anticipated for its operation."

Report describing the fabrication of Doppler Helices, which were 1/8 inch diameter x 12 foot long uranium core completely enclosed within a thin metal jacket and wound into a spring or helix shape.

Describes the damage grasshoppers cause to crops, how to identify different species, how they develop, and where and how they live. With this information as a background, the final section describes how to control them.