Investigation of dust loading capacity for various assemblies of air filter media on atmospheric dust has continued using the small tester described in previous reports. The effect of fiber size and packing density in Fiberglas mat has been studied. The combination of very fine fibered glass mats now in use at Oak Ridge was given special investigation. Tests were made using a coarser mat as a prefilter and an economic advantage was showm for such protection. As a result of laboratory studies on gauze backed hand sheets a paper mill run is planned to make paper comparable to #6 now used by Chemical Corps for AEC filters but stronger and lower in cost In this run the paper will be made with a reenforcing gauze backing. Fabrication work is being carried on with emphasis on two special shapes of units both of which aim to simplify installation and removal and to give better protection to operating personnel when filters are being changed. These shapes namely the hollow cube and the circular will be described in detail with sketches and test data. A 950 CFM full scale model of the hollow cube has been constructed to demonstrate the practicability of the …

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: Applicability of the anti-nepotism statutes to the appointment of a policeman by the City Council of a city incorporated under Title 28, Chapters 1-10, V.C.S.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: Imposition of penalties and interest for non-payment of motor fuel taxes.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: Authority to pay for the construction of fences on rights-of-way for new county roads from the permanent improvement fund.

This report details events of importance reported by the Hanford Operations Office for the week ending May 25, 1949.

The basis feed to the Redox plant is 5,000 lb/day of uranium, supplied both as current irradiated uranium metal slugs in jackets, and as uranium compounds from the existing metal waste storage tanks. The proportions of the two feeds are chosen according to the enrichment level of the irradiated metal, so as to give a plutonium production of about 650 gm/day. The design basis has been taken as 0 to 1,500 lb/day U from the waste storage system and 2,000--5,000 lb/day of irradiated metal. Only the feed preparation from irradiated metal is discussed in this process description, and a basis of 5,000 lb/day is used throughout. The metal feed has associated with it 172.5 lb. Al and 2.5 lb. Si as slug jackets, and contains about 650 gpm. plutonium and 3 {times} 10{sup 5} curies of gamma-emitting fission products (FP). The purpose of the feed preparation section is to remove the aluminum and silicon, and to dissolve the uranium as an aqueous solution for feed to the Redox extraction battery. Secondarily, it is tentatively proposed to provide equipment in this section to achieve a preliminary decontamination from ruthenium, which is poorly handled by the Redox extraction system, and from FP …

The overall testing of the vertical sheet rod system is a comprehensive program which has been divided into several phases. These phases are presented here, with a short resume of the testing required under each phase, to enable the formulation of the project proposal for the complete test program. It is intended that very detailed test requests will be issued for the separate phases as data from previous tests and further design studies indicate the exact information or data desired from a particular test.

Report presenting aerodynamic and icing investigations conducted in the icing research tunnel on a model of a turbojet-engine nacelle with a long straight air inlet in order to provide basic design criteria for hot-gas blowback systems. The most uniform temperature distribution was obtained with a bleedback of 4.4 percent at a gas temperature of 1000 degrees Fahrenheit and resulted in an average dry-air-temperature rise of 46 degrees Fahrenheit.

Report presenting the results of several investigations of the performance of different types of clamshell variable-area exhaust nozzle far turbojet engines to determine the efficiency of that type of exhaust nozzle as compared with conventional fixed-area conical exhaust nozzles. The investigations were conducted at zero-ram sea level conditions on three different full-scale turbojet engines and using five different nozzles.

None

Report presenting an investigation to determine the longitudinal stability characteristics of a complete model equipped with a variable-sweep wing at four different angles of sweepback. The primary objective was to study various wing modifications and an external-flap arrangement designed to minimize the shift in neutral point accompanying the change in sweep angle.

Discussions included the aluminum nitrate recovery process; specifications for process pumps; a review of the safety of the Redox process; plans for the proposed Waste Tank Farm, retention basin, diversion box, and cribs; and a request from the US AEC for a concise summary of the entire Redox program.

This report details events of importance reported by the Hanford Operations Office for the week ending May 18, 1949.

A report on high voltage pulse transformer designs at the University of California Radiation Laboratory.

Report presenting an investigation to evaluate the effects of split flaps, elevons, sharp leading edges, drooped-nose flaps, and extended-nose flaps on the lift, drag, and pitching-moment characteristics at low speed of a wing-fuselage combination with a wing with the leading edge swept back 63 degrees and an aspect ratio of 3.5. Results regarding the plain wing and wing-fuselage combinations, Reynolds number, split flaps, elevons, leading-edge devices, and highest lift coefficient attained before longitudinal instability are provided.

This report discussed cadmium coated splines which have been developed to supplement the regular control rod systems under emergency shutdown conditions from higher power levels. The objective of this test was to determine the effectiveness of one such spline placed in a tube in the central zone of a pile, and of two splines in the same tube. In addition, the process control group of the P Division asked that probable spline requirements for safe operation at various power levels be estimated, and the details included in this report. The results of the test indicated a reactivity value of 10.5 {plus_minus} 1.0 ih for a single spline, and 19.0 ih {plus_minus} 1.0 ihfor two splines in tube 1674-B under the loading conditions of 4-27-49, the date of the test. The temperature rise of the cooling water for this tube under these conditions was found to be 37.2{degrees}C for 275 MW operation.

This document details activities at the Hanford Works during the month of April 1949.

The operation of the 184" synchro-cyclotron is reviewed in terms of the theory as developed by the authors. Certain relevant data on the properties of the magnet and rotating condenser are also presented.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: Classification for inheritance tax purposes of son of decedent's divorced former wife.

Exploratory tests are reported which indicate the feasibility of a one-step reduction process for the preparation of uranium metal from the hexafluoride by the action of calcium metal and iodine.

Report presenting the results of an analytical investigation, which demonstrated that the inlet of a turbojet engine can be protected from ice accretions by bleeding hot gases from other locations within the engine to the inlet without undue loss in thrust. Results regarding the bleedback requirements, engine performance, effect of nozzle area, mixing efficiency, and seriousness of thrust losses are provided.

None

The quartz-fiber microbalances used in the Mound Laboratory operations are of the conventional Kirk-Craig type, but are housed in vacuum-tight cases which permit foil weighing by remote control.

The following is a report of a trip to the Simonds Saw & Steel Company, Lockport, New York, on May 3, 1949. The purpose of the visit was to observe the various operations involved in the rolling of uranium rods at this plant and health problems associated with the rolling operations.