None

Reported are: physics (B Pile, D Pile, F Pile, general physics); and water, corrosion and engineering (process water control and pressure drop studies, corrosion, graphite expansion).

None

Physics information for the D and F piles is presented. Thermal conductivity, reactivity, and irradiation levels are included. Concerning the cooling systems: process water control, pressure drip studies, purging studies, corrosion, and gun barrel clearance of expanded graphite are discussed. (GHH)

This technical progress report details 100 Area activities for the time period of May 14 through May 20, 1946.

This report details 100 Area reactor operation for the time period of May 21 through May 27, 1946.

From Introduction: "A collection balanced-aileron test data is given in reference 1. Reference 2 presents a collection of data applicable to the design of tail surfaces. The results of analyses of data for control surfaces with internal balances, plain-overhang and Frise balances, beveled trailing edges, and unshielded horn balances have already been published in references 3 to 6."

The following report discusses findings resulting from experiments on recycled carbon tetrachloride at various stages of the proposed purification process.

From Introduction: "It is the purpose of this paper to describe the physical properties that are necessary to specify mixture quality in a system containing fuel and dry air and to evaluate the theoretical rolation between these properties and the physical properties of the mixture."

Report presenting a number of calculations of bending-torsion wing flutter at two Mach numbers and a comparison of the results. The results indicated that the effect of compressibility on flutter speed for subsonic speeds with no shocks, although complicated, is relatively small in the usual cases.

Abstract: This is basically a counting rate meter, with an alarm circuit, operating from four GM tubes as the detecting elements. The Hand Counter comprises four logarithmic counting rate meters working from four GM tubes mounted individually, with associated electronic circuits, in suitable shields with a metal mesh type of window. Both sides of both hands are sampled simultaneously. In the Foot Counter, two GM tubes are separately and mounted in a suitable mesh window shielded with the electronic circuit; the foot counter uses only two counting rate meters, and both feet are sampled simultaneously. Each circuit is built in two parts; two tubes are in the shield and the balance of the circuit is in the electronic unit which is a standard 17" x 13" chassis. Circuit diagrams are included.

"A single chart has been prepared that simplifies the calculation of the thermodynamic properties of air, various octene-air mixtures, and mixtures of those with their products of combustion at all temperatures below which chemical dissociation becomes unimportant. The chart is based on the use of 1 pound mol of mixture, and examples of its use are given in the form of the calculation of a turbocompressor power plant and a supercharged Otto engine cycle" (p. 1).

None

"Column and plate compressive strengths of extruded 14S-T aluminum alloy were determined both within and beyond the elastic range from tests of flat-end H-section columns and from local-instability tests of H-, Z-, and channel-section columns. These tests are part of an extensive research investigation to provide data on the structural strength of various aircraft materials. The results are presented in the form of curves and charts that are suitable for use in the design and analysis of aircraft structures" (p. 1).

Note presenting an investigation of the use of aluminum alloy 14S-T in heavy-duty structural applications and aircraft. The column data presented in this report have been obtained on extruded shapes and on rolled and drawn rod of the alloy.

Web stresses and flange stresses were measured in three built-up beams: one of constant depth with flanges of constant cross-section, one linearly tapered in depth with flanges of constant cross section, and one linearly tapered in depth with tapered flanges. The measured stresses were compared with the calculated stresses obtained by the methods outlined in order to determine the degree of accuracy that may be expected from the stress analysis formulas. These comparisons indicated that the average measured stresses for all points in the central section of the beams did not exceed the average calculated stresses by more than 5 percent. It also indicated that the difference between average measured flange stresses and average calculated flange stresses on the net area and a fully effective web did not exceed 6.1 percent.

Report presenting several methods of predicting the compressible-flow pressure loss across a baffled aircraft-engine cylinder that were analytically and experimentally investigated on a typical air-cooled aircraft-engine cylinder. Results regarding the evaluation of data, comparative accuracy of correction methods, and ability to apply information about heat transfer to compressible-flow pressure-drop predictions are provided.

Note presenting static tests made on machine-countersunk riveted joints in 24S-T, X75S-T, and Alclad 75S-T sheet using A17S-T and 24S-T rivets. In order to intensify the cutting action of the rivets, all specimens were made with the depth of countersink just equal to the thickness of the sheet.

Note presenting pressure distributions and schileren photographs for the high-speed flow about a symmetrical airfoil at zero lift in open and closed jets in order to show the nature of the jet-boundary interference. Results regarding the application of jet-boundary-interference theory, analysis of experimental wall-interference data and comparison with theory, conditions near choking, and change of velocity ratio with Mach number are provided.

From abstract: "Experiments covering the coprecipitation of Thorium and Uranium peroxides are described on synthetic and actual 1300 cycle machine wash effluents."

The following report discusses the deposition of radioactive elements during a nuclear fission in the skeleton. Studies are concerned with chronic effects of toxic radiation developing within the bone marrow and decontaminating the cells.

Tests were made to determine the effect of brake forming on the strength of 24S-T aluminum alloy sheet that had been formed to an inside bend radius of three times the sheet thickness. The results for both directions of the grain of the material showed that the compressive yield stresses were appreciably increased, that the tensile yield stresses were moderately increased, that the ultimate tensile stresses were only slightly increased, that the elongations were considerably reduced, and that the shapes of the tensile and compressive stress-strain curves were markedly changed.

An extended form of the Ackeret iteration method, applicable to arbitrary profiles, is utilized to calculate the compressible flow at high subsonic velocities past an elliptic cylinder. The angle of attack to the direction of the undisturbed stream is small and the circulation is fixed by the Kutta condition at the trailing end of the major axis. The expression for the lifting force on the elliptic cylinder is derived and shows a first-step improvement of the Prandtl-Glauert rule. It is further shown that the expression for the lifting force, although derived specifically for an elliptic cylinder, may be extended to arbitrary symmetrical profiles.

Report presenting compressibility effects on the aerodynamic section characteristics of an airfoil with a round-nose slotted Frise aileron for various pressure distributions and angles of attack. Previous testing with sharp-nose ailerons demonstrated heavy stick forces at large aileron deflections, leading to testing on the round-nose aileron. Results regarding control effectiveness characteristics, aileron hinge-moment coefficient, Frise aileron critical speeds, section aileron loads, and other airfoil characteristics are provided.