Bench scale studies have been made of the recovery of uranium from acid leach liquors (and slurries) by solvent extracting with di (2-ethylhexyl) phosphoric acid in an organic diluent. Uranium may be stripped from the organic solvent by either alkaline or acidic reagents, the former having been studied in greater detail. On the basis of these tests, a recovery process may be considered which shows promise both from the standpoint of operation and chemical costs. Under proper conditions, vanadium can also be extracted by the di (2-ethylhexyl) phosphoric acid and stripping again may be accomplished with either acidic or alkaline reagents. Preliminary studies have been made of these possibilities. In addition to di (2-ethylhexyl) phosphoric acid, some other organophosphorus acids, have been cursorily examined in respect to their extraction and/or stripping performance.

The leak detector system consists of one gas pressurized reservoir containing heavy water, a tubing manifold connecting the pressurizer to six separate lines each connected to one of the flanges, tubing lines leading from the second hole on each of three flange pairs (dome and heat exchanger flanges) back into the instrument room, plus required valves and fittings. A schematic diagram of the system in included.

A study was made of a method for the flame photometric determination of iron. In Part I of this report, the flame emission spectrum of iron, measured by means of a Beckman Model DU spectrophotometer with a flame attachment, is compated to that measured with an ORNL high-sensitivity, recording, single-beam instrument, in order to determine which instrument is best suited for this application. Although it was found that the Beckman product has the higher resolving power over the wavelength region of 360 to 400mu, it does no posses the sensitivity or ease of operation of the ORNL instrument. On this basis, the ORNL flame spectrophotometer is used in subsequent tests. After selecting the best-suited instrument for the flame photometric determination of iron, it was necessary to establish the optimum operating conditions for this particular method. These conditions are described in Part II.

Report issued by the Oak Ridge National Laboratory discussing a Health Physics Instrument Manual. Descriptions, characteristics, and applications of different instruments are presented. This report includes tables, illustrations, and photographs.

Report containing a description of the Oak Ridge National Laboratory's High-Flux Isotope Reactor (HFIR) and its operation.

The technique of high-frequency titrimetry has been applied to the determination of thorium, uranium, sulfate, and free acid. In Part I of this report, the reproducibility of the method for the titration of standard solutions which contained 50mg of thorium in the absence of interferences is established. The coefficient of variation of the method, under these conditions, was found to be less than one per cent. In Part II, the effect of uranium on the high-frequency titration of thorium, as well as the application of the method to actual samples, is discussed. Uranium in a ratio of 5 to 1 to thorium can be tolerated. When the method is applied to the analysis of representative samples, the coefficient of variation is one per cent.

Technical report covering the Homogeneous Reactor Experiment (HRE) reactor physics and engineering, out-of-pile corrosion, in-pile studies, recombination of hydrogen and oxygen, HRE chemical studies, experimental programs for the HRE, and long-range studies. [From Summary]

One of a series of experiments to test the radiation corrosion of Zircaloy-2 and other possible reactor construction materials in UO2SO4 solutions under various radiation intensities, temperatures, solution compositions, and velocities of flow past specimens.

During the development of in-reactor corrosion experiments three types of bomb designs have been developed for following quantitatively the consumption of oxygen in a bomb which is fabricated from the particular metal under test. The bombs are designed so as to be rocked continuously during their in-reactor exposure, consequently agitating the uranium salt solution contained in the bomb and permitting gentle movement of the solution past metal specimens and other corroding surfaces. The oxygen pressure is produced within the bomb at the beginning of the run either by the withdrawal of gas from an oxygen tank or by the decomposition of hydrogen peroxide added just prior to closure. Temperature measurements are obtained by mans of thermocouples placed in a well within the bomb body or, in the latest design, there will also be thermocouples staked at several points on the outer wall of the bomb. The assembly is inserted in an experimental access hole in the reactor, brought up to a predetermined operating temperature by means of an electric furnace in close contact with the bomb, and allowed to remain for the desired amount of exposure to reactor radiation. Periodic measurements of temperature and pressure are made and the bomb …

The conversion of UNH to UF4 and UF6, utilizing moving-bed techniques, is being studied; sufficient progress has been made that an evaluation of the process is warranted. The procedures under study, the Fluorox Process, have three major advantages: (1) substitution of HF for high-cost fluorine, (2) considerable reduction in HF requirements, and (3) marked reduction in plant-size and mechanical complexity.

Results of previous toroid tests with 28 micro 1600 fired ThO2 spheres are analyzed. Four possible explanations for the essentially zero attack rates are offered and discussed: peculiar motion of toroids or some unknown wall effect; rotational hydrodynamic forces cushioning the particle impact; the bed was not in suspension and not sliding over the walls of the toroid; round particles are not as erosive to oxide film surface as sharp pointed particles.

Report documenting the process of decontaminating low-activity fuel waste water via the Scavenging-Precipitation Ion-Exchange process. This includes analyses of the costs of the process as well as a description of the operation of the pilot plant.

Nuclear and radiation hazards have been investigated for all phases of operation to be carried out in the mechanical decladding of SRE fuel elements. The SRE fuel is 2.8% enriched with a maximum burnup of 1,000 Mvd/ton and minimum cooling of 120 days. Each element contains 9 kg of uranium metal (~2 kg U-235) and is made up from 84 slugs (3/4"D x 6'"), clad with (10 mil wall) stainless steel tubing. It is planned to ship the fuel from Santa Susana, California, to Oak Ridge in the modified PAR loop carriers, with a maximum of 10 elements being shipped in each carrier per trip.

From introduction: "This is the thirteenth in a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."

The 0.045m UO2SO4, 0.036m CuSO4, 0.025 m H2SO4 solution (HRT fuel composition) was chemically stable during 1, 866hr of operation at 280ºC and 1500 psi. The system was pressurized by boiling a 0.4 gpm stream of the fuel in a titanium heat exchanger at 313ºC.

The objectives of this study have been to examine the problems of the pebble-bed reactor concept and to conceive a design of a facility for investigating the feasibility of this type of reactor. The design must provide for adequate leaktightness of the contaminated-gas system and adequate maintenance of contaminated components, the most vital feasibility questions of the concept.

This report describes the preprocessing stage to be added to the present ORACLE-Algol translator which will enable it to translate programs containing procedures. The Algol 60 procedure is an extremely flexible tool, and its full implementation presents a number of difficulties. Since it is undesirable to undertake major revisions of the existing parts of the translator and impossible to solve all of these difficulties in a processing stage, it was necessary to impose certain restrictions on the use of procedures. The result, however, retains the more basic features of the Algol 60 procedure concept. Most of the algorithms published in the Communications of the Association for Computing Machinery can be handled by the preprocessor with few minor or no changes.

Available knowledge of precision limits in S.S. accountability measurements and/or calculations by reactor and chemical processing groups is surveyed and summarizes. Experience in comparisons of reactor (production and research) calculations versus chemical plant accountability measurements is also reported. A general tentative conclusion is that available precisions (+/- 0.54 to +/- 0.78% ) in chemical plant measurements is also reported. A general tentative conclusion is that available precisions (+/- 1.0 to +/- 11.0%) possible by calculations (nuclear and/or engineering) of power reactor systems; however, with operation and empirical experience (e.g. less than +/-1.0%

The fire involved approximately 30 liters of isopropyl alcohol as a result of the ignition of about 16-18 liters of isopropyl alcohol and a slurry of thoria and ammonium nitrate in a 20-liter glass carboy. This material was undergoing a volume reduction by boiling in a floor-type metal hood with Plexiglas sides and 3 sliding door on the front of ordinary glass. The alcohol vapor was vents directly into the hood (Fig1.)

After two batches (~ 340 kg) of fluoride salt from the ARE were reprocessed, pilot plant operations were terminated because of a leak through which an estimated 780 g of uranium (as UF6) escaped. Of the 21 kg of highly enriched uranium in the feed, 93.12% was collected as UF6 product, 0.13% represented measured losses, and 3.72% was unaccounted for (leak). An additional 3.03% was reclaimed from NaF beds and equipment washes. The product met both chemical purity and activity specifications for product level UF6. Decontamination from fission products was essentially complete. A gross gamma D.F. was apparently limited by the low activity of the feed salt.

Report issued by the Oak Ridge National Laboratory discussing a review of the Radioisotopes Program during 1964. Research and experimental projects conducted during 1964 is presented. This report includes tables, illustrations, and photographs.

From introduction: "54 tables are given of the Z coefficients."

At the present time, plants in the 100-500Mv size range are more numerous and carry the greatest portion (over 50%) of the total steam-electric plant load in the U.S. utilities industry. The contribution of plants of over 1,000-Mv capacity is increasing more rapidly than any other size clarification and at present represents about 10% of the total capacity. By 1962 the TVA will have six plants with capacities of over 1,000-Mv. The largest steam-electric plant in the U.S. is the TVA plant at Kingston, Tenn., with a nameplate capacity of 1,440-Mv. Turbine-generator units are also following a trend of ever-increasing size. In present construction, the 150-200 Mv size range for units is the most common and represents the greatest contribution to capacity. Two units of 500-Mv nameplate rating each, the largest in the U.S., are on order by the TVA, and an 800 Mv unit is contemplated.

Stress corrosion was found in 8 components of the HRT mockup; only of four of these actually shut down the loop. All of the failures have occurred in the high-pressure system of the loop.