Because of the unsatisfactory state of knowledge concerning the surface shearing stress of boundary layers with pressure gradients, the problem is re-examined. It is found that for general turbulent boundary layers in wall proximity, that is, in the laminar sublayer, in the transition zone and in the part of the completely turbulent zone near the wall, the same universal law applies as for the plate flow.

Simple elements were subjected to repeated loads of variable ampliture, chosen in such a way that they may be regarded as approximations to the operational loads (gust and maneuver) experienced by an airplane. The effect of varying some parameters was investigated briefly. Some discussion is given of the question whether a design according to current (1938 German) requirements for static strength is adequate from the fatigue point of view, and existing requirements on fatigue strength are compared,.

"In connection with Pohlhausen's solution for the temperature field on the flat plate, a series of formulas were indicated by means of which the velocity and temperature field for variable physical characteristics can be computed by an integral equation and an iteration method based on it. With it, the following cases were solved: On the assumption that the viscosity simply varies with the temperature while the other fluid properties remain constant, the velocity and temperature field on the heated and cooled plate, respectively, was computed at the Prandtl numbers 12.5 and 100 (viscous fluids). A closer study of these two cases resulted in general relations: The calculations for a gas of Pr number 0.7 (air) were conducted on the assumption that all fluid properties vary with the temperature, and the velocities are low enough for the heat of friction to be discounted" (p. 1).

The performance of a jet power plant consisting of a compressor and a turbine is determined by the characteristic curves of these component parts and is controllable by the characteristics of the compressor and the turbine in relation to each other. The normal. output, overload, and throttled load of the Jet power plant are obtained on the basis of assumed straight-line characteristics.

The steady flow of a compressible fluid past two-dimensional infinite cascades is obtained by using the Chaplygin's simplified pressure-density relation.

A single-sheet resonance system for normal incidence of sound was investigated to study in detail the effect of sympathetic vibration of the resonator front wall on sound absorption.

"For calculation of the characteristic parameters of the boundary layer (momentum-loss thickness and form parameter for the velocity profile), two quadrature formulas are given which are valid for the laminar as well as for the turbulent state of flow. These formulas cover both the two-dimensional and the rotationally symmetrical case. The calculation of the momentum-loss thickness is carried out by a simple integration of the energy theorem" (p. 1).

From Introduction: "The fundamental, practically the most important branch of the modern mechanics of a viscous fluid or a gas, is that branch which concerns itself with the study of the boundary layer. The presence of a boundary layer accounts for the origin of the resistance and lift force, the breakdown of the smooth flow about bodies, and other phenomena that are associated with the motion of a body in a real fluid. The concept of boundary layer was clearly formulated by the founder of aerodynamics, N. E. Joukowsky, in his well-known work "On the Form of Ships" published as early as 1890."

A brief review of exact two-dimensional supersonic flow theory and Ackeret's linearized theory are first presented. The lift and drag coefficients of a cascade of flat plates are calculated exactly and compared to those obtained using the linearized theory. The forces on the cascade are determined for unsteady inlet flow. The flat plate cascade theory is extended to compute the efficiency of a supersonic propeller with friction and finite blade thickness.

This report is concerned with fluid mechanics of two-dimensional cascades, particularly turbine cascades. Methods of solving the incompressible ideal flow in cascades are presented. The causes and the order of magnitude of the two-dimensional losses at subsonic velocities are discussed. Methods are presented for estimating the flow and losses at high subsonic velocities. Transonic and supersonic flows in lattices are then analyzed. Some three-dimensional features of the flow in turbines are noted.

"Static tensile test results are presented for specimens of 2014-T6, 2024-T4, 6061-T6, and 7075-T6 aluminum alloy containing fatigue cracks. The results are found to be in good agreement with the results reported for similar tests from other sources. The results indicate that the presence of a fatigue crack reduced the static strength, in all cases, by an amount larger than the corresponding reduction in net area; the 6061-T6 alloy specimens were least susceptible to the crack and the 7075-T6 alloy specimens were most susceptible" (p. 1).

"The theory of cascades, made up of a series of flat plates placed one behind the other, is extended to the case where the impinging stream is not uniform, and the deduced properties of this cascade-flow are then applied to the study of the wall interference between such as cascade-like boundary and a vortex-source type of singularity. It is shown that the induced velocities, produced by the presence of such a wall, are equal to what is obtained by action of a suitably chosen 'reflected' singularity situated on one side of the wall, together with the action of another suitably chosen 'transmitted' singularity placed on the other side" (p. 1).