This report analyzes Parian and Teflon that were exposed to solutions of 1AX, 1AS, and 1AF, ANL June 1, 1948 Flowsheet, under conditions described in the following report.

Objective: "The laboratory equilibrium study RC-E-1 described in this report was carried out to obtain uranium equilibrium curves at various concentrations of nitric acid and of TBP."

From introduction: "This report is concerned with exploratory experiments designed to studies the efficiency of a number of scavengers for zirconium and niobium adsorption and to provide preliminary information on the best conditions to employ on the most satisfactory of those scavengers studied, namely Super Filtrol FO. The data in this report include data obtained through October, 1949, and are by no means considered to be final. The investigation is currently being actively continued."

The following report provides results from laboratory tests on the corrosion resistance of various types of stellite facings on astenitic stainless steel T-347 to Redox streams.

Report summarizing physical studies on Redox solutions and metal waste solutions, including refractometric investigations.

Report discussing study on recovery of nitric acid in the uranium recovery process. The behavior of chloride ions and tributyl phophate is noted, and the quality of recycled nitric acid was tested. Stainless steel in the nitric acid recovery system was evaluated for corrosion.

The following report describes a chemical procedure to analyze fission products and long-lived rare earths in both untreated urine samples and the supernates from the precipitation steps in the TTA procedure for plutonium.

Introduction: "A limited test progress for the evaluation of type 347 stainless steel pipe which failed the Huey (?) test has been complicated. The tests reported herein were similar in scope to those reported in document number EW-20765, Corrosion Tests on Stainless Steel Plate, Waste Metal Recovery Process. Material tested was obtained on order number EWC-8553, National Tube Company Heat #3X9741. Lots 9789 and 9790."

This report discusses a proposed method for treating the effect of increasing critical mass of plutonium solutions, which occurs when hydrogen density is reduced by dilution with heavier nuclei.

Interest has been expressed in continuously monitoring the beta activity of the uranyl nitrate solution pumped to the RCU receiver tank, to facilitate operation at higher flow rates and with younger feeds. A beta scintillation detector has been developed which should make this feasible, and it is proposed that it be tested on stream for this use.

Two xenon extraction runs were made this month. It appears that a small design change in Trap #2 will be necessary so that a dry ice-trichloroethylene slurry can be used for coolant rather than liquid freon. For each of the runs this month the enriched generator was exposed for four hours in the est pile operating at 100 watts. A period of eight hours for cooling and xenon builidup was allowed before the collection and separation runs were started.

Hanford uranium contains minute angular inclusions which affect the microstructure, reactivity, and other important factors controlling the serviceability of the metal. Small quantities of the inclusions have been isolated by chemical means, and the x-ray diffraction patterns and chemical analyses of the isolated materials have been determined. As a first step in the identification of the inclusions present in rolled uranium, a search was made for a chemical method of separating the inclusions from the matrix metal.

The decontamination of portable instruments by the Calibration Unit has presented a problem for some time. Most of the contamination is in the 100 to 500 c/m or 500 to 2000 d/m range. Higher levels of contamination can usually be reduced to these levels, but further cleaning proves quite difficult

During the canning of slugs for Production Test 313-105-3-M, a high number of rejects were caused by gas voids in the A1-S1 bonding layer. Since the heat treatment of the slugs in a molten salt bath resulted in a chemically altered surface, an investigation was made to determine the volume of gas evolved from salt-bath heat-treated slugs as compared to other types of slugs. This test was designed as a preliminary test to determine if there were a significant differences.

The remodeling, fabrication, and instrumentation of a high vacuum system are described. The faults encountered with the old system and their solution are outlined. Tests were made on diffusion pump oils and on the reduction of pump oil back diffusion. The measurement of high vacuum pressures by a cold cathode ionization gage at various points on a vacuum system are discussed.

Abstract: "A titrimetric method for the determination of fluoride in plutonium is reported. Prior to a steam distillation of the fluoride, the bulk of the plutonium is separated by precipitation of the sulfate. The fluoride in the distillate is titrated at a pH of 3.2 with 0.001 M thorium nitrate, using chrome azurol-S indicator. Applied to samples containing 1 to 15 parts per million fluoride, the recovery is 87% and the precision on the 95% confidence level is +/- 0.65 ppm."

Describes the design criteria, design details, and final installation of a high precision temperature and intimate contact monitor.

From objective: "The objective of this work was to design, develop, assemble, and test and automatic analyzing monitor for recording the prominent isotopes in reactor effluent cooling water."

In HAPO solvent extraction processes there are two independent aspects of nitrous acid chemistry. One concern the decomposition of the solvent through nitration reactions and the attendant problems. These reactions are autocatalytic in the presence of nitric acid and have threshold values for both temperature and nitric acid concentration for a given solvent below which nitrous acid disappears and above which it is generated with continuous destruction of the solvent. These reactions are identical to those found in the prior study of the hexone system.

A number of the questions which have been posed to us in the subject references are commented upon below. These have been reviewed by personanel of the Research and Engineering Operation and the Facilities Engineering Operation, Chemical Processing Department, and of the Chemical Research and Development Operation, Hanford Laboratories Operation. Particular acknowledment is given G. J Alkire, J. P. Duckworth, J. B. Fecht, R. G. Geier, E. R. Irish, H. M. Jones, G. C. Oberg, A. M. Platt, W. H. Reas, W. C. Schmidt, R. J. Sloat, W. H. Swift, M. T. Walling and L. L. Zahn of these organizations for assistance given assembling this information.

The HAPO Critical Incident Alarm, Model I, is an instrument designed to give an audible and visual alarm signal in the event of a critical incident to which it is exposed. There will be thirty-one (31) of these instruments installed and several spares located in the various manufacturing buildings in the Chemical Processing Department where there exists any possibility of a critical incident occurring. The instrument is intended as a post or after-the-fact warning device. It will offer no protection prior or leading up to, nor prevent, a critical incident. They are intended to be operated from the 115 V. A.C., 60 C.P.S. emergency line power. The instrument is self-contained, including the radiation detector, and will be calibrated to alarm at 500 mr/hour in a gamma field.

Nearly all nuclear reactors being designed and built today- whether for research, power, or productions of fissionable materials- use recirculating fluids for cooling. However, a number of production reactors are still operating with single-pass cooling by treated natural water. The Hanford Atomic Products Operation of the General Electric Company presently operates production reactors for the AEC at Richland, Washington. The first reactors were built during World War II, and utilized a standard water treatment which was designed to provide large quantities of settled, filtered Columbia River water for once-through cooling.

Because of the excessive vertical fragility and high replacement costs of mice-window G-M tubes used in vertical and horizontal lead-pig shelf counters, it was requested that a simple system of conversions to reliable scintillation detection be accomplished.

During the period when the writer mixing fuel element was being evaluated, a small Litton glass lathe and a General Electric Fillerarc welder were used to weld the mixing spool to the fuel element. Due to the condition of these units and to the numerous difficulties encountered with them, it was deemed necessary to design and procure a semi automatic welding unit which could weld in excess of three hundred fuel elements per day.