Equipment has been designed and constructed for the purpose of leaching pure uranium minerals in both acidic and basic circuits. This equipment provides a means for removal of a series of samples during any one run, control over speed of agitation, indication of gas over pressure, and automatic temperature control. These units may be operated up to 1500 p.s.i. Solid UO2 samples were prepared by sintering under hydrogen to 1800 degree C. Preliminary results of the leaching of sintered UO2 in a basic Na2CO3-NaHCO3 circuit resulted in the formation of an insoluble yellow precipitate (probably Na2UO4) for low concentrations of Na2-NaHCO3. At higher carbonate concentrations no insoluble precipitate was formed and the rate of leaching was found to increase vary rapidly above 300 p.s.i. oxygen over pressure.

The general purpose of the work performed under this contract was to develop geophysical and geochemical methods and techniques which would be effective aides in exploring for uranium and to appraise their effectiveness as determined by the results of field surveys in prospective areas about to be drilled, or in an area where ore is already known.

Abstract: "Aluminum-clad nickel-plated uranium is corrosion resistant in boiling water. Samples with intentional defects in the aluminum-nickel clodding layers, after testing for more than 300 hr. showed no sign of rapid failure. The study of electroplated metals on uranium for aluminum cladding has defined the effects of several processing variables on the corrosion resistance. The quality of the uranium and the quality of the aluminum-nickel bond were important. Heat treatment and vacuum outgassing of the nickel-plated uranium prior to aluminum cladding were beneficial, and minimizing the amount of air present in the hot-press assembly was desirable. Variation in the steps for electroplating on uranium did not affect the corrosion resistance of aluminum-clad uranium."

Report issued by the University of California Radiation Laboratory discussing an experiment in which a system was designed and built to load titanium with deuterium gas of a high purity. It discusses the results and the parameters affecting the amounts and purity of the absorbed gas.

A comparison of the simple impact theories of line broadening by electrons with the detailed computations of Kivel, Bloom, and Margenau.

Fourier analyses are made on two functions. The first is a step function forward from periodic samples of a sinusoid. If the frequency of the sinusoid is less than one-half of the sampling frequency, it is shown that the step function has no frequency components less than one-half of the sampling frequency other than that of phase, and duration with respect to the interval of the analysis. It is shown that the insertion of a blank space in the period of analysis reduces greatly the uncertainty of the amplitude of the initial sinusoid as estimated from the results of the Fourier analysis. The results of the analyses are useful in the design and evaluation of certain analog data-analyzing systems.

A generalization of the Fermi-Thomas model for application of mixtures. This study attempts to determine the equation of state of water up to pressure of 10,000 megabars and temperatures of several thousand electron-volts.

Ultrasonic inspection for subsurface flaws is widely used in American industry. This report reviews the general principles and specific techniques of ultrasonic testing. The information is based on a review of the technical literature plus the experience of the Quality Assurance Department at Sandia Corporation in applying this nondestructive testing technique to quality evaluation programs.

A generalization of the Lindemann law is used in connection with the Murnaghan equation of state for a solid to derive theoretically the empirical Simon equation for the fusion curve. For the alkali metals it is shown that experimental values of the temperature exponent in the Simon equation are quantitatively compatible with the theoretical evaluation given, and, furthermore, that the theory can predict approximate values of the experiment, in practice.

The results of an experimental pilot study on the location time, for a sequence of N specified positions on a panel, are given for 1 <_ N <_ 30. The positions to be located were randomly arranged on one set of panels and arranged according to an ordering scheme on a second set of panels. Th location time for N positions randomly arranged on a panel varies approximately as N(2). In the case of an order arrangement the location time is essentially proportional to N. Even for as few as 30 positions, the location time for an random arrangement was twelve times greater than for an order panel. For 60 positions the ratio would be 19, and for 90 positions the ratio would be 26.

A transistorized binary counter circuit is described that operates over a temperature range of -65 degree F to +165 degree F. the supply voltage is 28 + 4 volts and the maximum trigger repetition rate is 5 kilocycles. the binary circuit is pre-settable and resettable by means of a switching arrangement that can be mechanized. Texas Instrument type 904 silicon transistors whose large signal current gain is 2.8 or greater at a -65 degree F can be used in this circuit.

From introduction: This report details the conceptual design of a 100 kw gas cooled reactor power plant of the type that would satisfy the electrical and space heating load of the Air Force distant early warning stations and might find application at other remote bases.