Introduction: This document describes the results of a six-week conceptual design study of an organic moderated and cooled reactor (OMCR) power plant adapted to a Class T-7 tanker.

During the canning of slugs for Production Test 313-105-3-M, a high number of rejects were caused by gas voids in the A1-S1 bonding layer. Since the heat treatment of the slugs in a molten salt bath resulted in a chemically altered surface, an investigation was made to determine the volume of gas evolved from salt-bath heat-treated slugs as compared to other types of slugs. This test was designed as a preliminary test to determine if there were a significant differences.

Abstract: This technical report contains a description of the nuclear analysis performed upon the SM-2 core and vessel for the period September 1, 1958 to December 31, 1959. Calculations are given for core reactivity, power distributions, lifetime, reactor control, kinetics, radiation problems, fuel and poison burn-ups, and the nuclear effects of poisons, temperature, and geometry. Wherever possible, experimental data is included in order to test the validity of the analytical models. The SM-2 nuclear analysis was performed by Alco Products, in. under Tasks 1, 8, and 10 of Contract No. AT(30-2)-326 for the Atomic Energy Commission.

From introduction: "Due to the hydrogen overvoltage at the surface of a mercury cathode, uranium solutions is hydrochloric acid may be reduced not only to the tetravalent state, but until considerable trivalent uranium is formed. Other metallic ions act as oxidation-reduction catalysts as well as being reduced themselves. The following paper is a study of the various reactions taking place in solution and at the surface of the cathode."

From abstract: "The study evaluates the utilization of superheat and moisture separation techniques in the SM-2 design to improve the steam plant reliability and thermal efficiency. Ease of packaging, steam plant transient response, and capital costs are also considered. The reference design used for comparison is the steam cycle employing saturated steam at 600 psia described in APAE No. 40, Volume II."

Report documenting the process of decontaminating low-activity fuel waste water via the Scavenging-Precipitation Ion-Exchange process. This includes analyses of the costs of the process as well as a description of the operation of the pilot plant.

Report regarding the mathematical analysis of the exponential pile experiment using highly absorbent slugs and assuming the emitting of fast neutrons. Related theory and equations are discussed.

Abstract. A method for the preparation of beryllium oxide of high purity is presented. Beryllium basic acetate (BeO-3Be(C2H3O2)2) is prepared from the metal or a convenient salt, a chloroform solution of this material extracted with redistilled water, the dried basic acetate distilled in a quartz apparatus, and this purified material converted to the oxide by fuming down with sulfuric acid and igniting at 1000 degrees C. Impurities detectable spectrographically were reduced to a very low level.

Technical report includes three reports of research progress: 1)Neutron scattering by A. Bratenahl; 2) Nuclear Cross Sections, Norman Knable.

Map of the area surrounding the census-designated place of Beclabito, San Juan County, New Mexico showing mine locations and mineralized rock exposures by geologic period, along with the location of triangulation stations with their elevation.

Preliminary recommendations are presented for drilling the area on a 1,000-foot grid to provide final elevation of the East Carrizo mining district.

Map showing uncontrolled structure contours of the Beclabito Dome Area, Shiprock District, Arizona-New Mexico. The Salt Wash-Bluff contact was spotted on aerial photographs as a basis for the construction of the uncontrolled structure contour map

"The phase and amplitude functions describing the betatron oscillations in the synchrotron are calculated using the revised parameters of the Cambridge Electron Accelerator. The results are given numerically and plotted in a graph for one machine period."

A transistorized binary counter circuit is described that operates over a temperature range of -65 degree F to +165 degree F. the supply voltage is 28 + 4 volts and the maximum trigger repetition rate is 5 kilocycles. the binary circuit is pre-settable and resettable by means of a switching arrangement that can be mechanized. Texas Instrument type 904 silicon transistors whose large signal current gain is 2.8 or greater at a -65 degree F can be used in this circuit.