Introduction. The phase diagram data reported in this paper were obtained during an investigation of the beryllium-metal compounds of the titanium group transition elements. Several compounds in these systems had been previously reported but their compositions and structures were not all known. In the course of this study many details of the phase diagrams of the system were observed. Tentative diagrams consistent with this data will be presented.

A brief series of experiments was performed to study the high temperature reaction of the Zircaloy-uranium-aluminum system at the request of Reactor Engineering Operation, Irradiation Processing Department. Knowledge of the high temperature behavior of this combination of materials is important to the evaluation of reactor behavior during possible accidental over-heating of a fuel channel.

Experiments with a simple pulsed magnetic field in cusped geometry are described. The plasma is generated inside the containment region rather than injected from an external source. It was found that creation of the plasma by a linear pinch discharge is most successful. Only qualitative studies have been carried out so far, using time-resolved visual observation of the plasma. Well-defined plasma bodies located in the central region between the cells were photographed. In order to make them clearly visible, a few percent of argon was added to the hydrogen.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Will Wilson, regarding a legal question submitted for clarification: Whether Attorney General's Opinion No. MS-94 is in conflict with or overruled by Opinion No. WW-355 relating to lotteries?

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Will Wilson, regarding a legal question submitted for clarification: Whether a "profit-sharing bonus card" distributed by a grocery constitutes a lottery scheme as defined in the Penal Code?

Vanadium group beryllides were prepared and studied by x - ray powder diffraction and crystallographic methods. Properties included phase studies, sintering studies, vapor pressure measurements, and thermal diffusivity measurements,

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Will Wilson, regarding a legal question submitted for clarification: Validity and interpretation of Article 19.01(2), H.B. 11, 3rd C.S., 56th Legislature, levying an occupation tax on brokers and factors as applied to real estate brokers and salesmen.

A crystallographic study of the transition element beryllides was undertaken in support of phase diagram work. These beryllides are very high melting, and the use of ordinary methods make it difficult to determine stoichiometry. We have succeeded in establishing the compositions and complete crystal structure description of all of the room temperature stable or metastable compounds of the beryllides of niobium, tantalum, titanium zirconium, hafnium, vanadium, chromium and molybdenum. Since some of the structures found were not previously reported, complete structure determinations had to be done.

Graphs have been made which show the nuclearly safe parameters for uranium rods in light water with uranium enrichments up to five weight percent U-235. These data were to serve as a guide to those persons who may be involved with the maintenance of nuclear safety in handling and processing operations with slightly enriched uranium fuel elements. The data are applicable to fuel element fabrication and processing operations, and in general to those operations involving the handling and storage of fuel elements apart from reactors.

Abstract. The peacetime application of nuclear explosives to the conservation and development of our national water resources is, at this time, of sufficient promise to present some of the possibilities publicly. In nuclear explosives man has at his disposal and service, a powerful source of energy - a new tool - that we believe can be utilized safely to excavate channels and lake basins, or to create conduits of broken permeable material and underground reservoirs. In surveying the possible applications of nuclear explosives, the following ideas are among those worthy of serious consideration: (a) the use of nuclear explosives for the economic movement of large volumes of earth in the construction of earth fill dames, (b) the use of nuclear explosives for the diversion of a stream from a river system, whose flow is largely lost to the sea, into another stream channel leading to an arid section or a closed basin, (c) the use of nuclear explosives to create a recharge basin or a conduit to a subsurface aquifer for fresh water recharge, and (d) the use of nuclear explosives to create off-channel reservoirs for the elimination of saline waters through recharge to a mineralized aquifer and by evaporation.

Summary. The analysis of the motion of a six-bar linkage is difficult because of the large number of variables involved and the large number of calculations that have to be made for each position of the linkage. If a digital computer is used to make the calculations required for a multi-position analysis of a mechanism, it is feasible to design by analyzing a large numbers of similar linkages and selecting the optimum configuration. In this paper expressions have been derived for the output angle as a function of the input angle and the transmission angle as a function of the input angle for any single-degree-of-freedom six-bar linkage for which the parameters are known An example showing the usefulness of a six-bar computer program as a mechanism design tool is discussed.

The evaluation of the inductance of an electrical component is often important in understanding and operating an electrical circuit. Inductance is defined by several equations, the most common being e= -L d1/dt . This equation defines inductance as the constant which relates the back emf produced in an element to the time-rate-of-change of current.

The problem of the reduction of an arbitrary truth function to the minimal union of basic cells is discussed. The solution to this problem has applications to pattern recognition and logical circuit design. An algorithm is presented that solves the problem and generates the class of minimal unions. It partitions an arbitrary truth function into a well-defined set of subfunctions (components) in such a way that the partition is invariant under all transformations that preserve the topology of the original truth function.

This report summarizes the research and development work carried out during December, 1959, and January and February, 1960, for Budget Activity 2790 - Separations Development for Non-Production Reactors. The major effort on Activity 2790 has been completed. Current efforts on the remaining problem areas will enable Hanford to begin reprocessing fuel elements from power reactors which employ depleted or slightly enriched uranium fuels in July, 1962.

At the present time, cerium-144 and premtheium-147 are the two fission product rare earths that appear most promising for use as the heat source in isotopic power units. Under proper conditions, cerium and the trivalent rare earths can be extracted from the Purex fission product waste stream as an insoluble sodium-rare earth double sulfate. A reprecipitation as the double sulfate, dissolution of the hydroxide, serves to give almost complete separation from the corrosion products, inert constituents of the waste, and from most of the fission products. The cerium and the trivalent rare earths must then be separated from each other. In the case of cerium recovery, it is necessary to remove the trivalent rare earths in order to maximize the specific activity of the cerium. If promethium is the desired product, a preliminary cerium separation is desirable to protect the ion-exchange resin (used for separating promethium from its adjacent rare earths) from the intense high-energy radiation from cerium.

Abstract. A neutron diffraction crystal spectrometer with a resolution of 13 microseconds per meter and monochromatic beam intensity up to 10(4)n/cm(2)=sec in the range 0.012-0.400 ev has been constructed for study of the activation cross section of Be7 as a function of energy in the thermal region. First preliminary results using ZnS(Ag) as a detector suggest the possibility of a resonance for the Be7(n,p)Li7 reaction in the region of 0.025-0.050 ev.

The following report is the final technical report on a series of reports under contract AT(11-1)-515, titled "Niobium Phase Diagrams", covering the period from April 15, 1957 to April 16, 1960.

Abstract. The cross section of photoneutron production in Be9 at energies of 1.692, 1.720, and 1.78 Mev has been investigated using radioisotope gamma-ray sources. Neutron counting was by manganous sulfate bathe and a long counter. Gamma-ray counting was by a scintillation spectrometer consisting of a NaI(T1) scintillation crystal and a 256 channel pulse-height analyzer. A theoretical treatment of the P [right arrow] S transition near threshold using square-well potentials is also presented.

Critical mass experiments to be conducted at HAPO will require dilute and concentrated plutonium solutions. Since very high plutonium concentrations (~2,000 g/l) cannot be attained in pumpable solutions, solid plutonium compounds will be utilized for this phase of the work. Mixtures of plutonium oxide and polyethylene, methyl methacrylate or paraffin compacted in containers have been considers for use in highly-concentrated plutonium systems of known hydrogen to plutonium atomic ratio (H/Pu).

The measurements reported here are companion measurements to those reported earlier in HW-63585. The only significant difference between the measurements is that 1.8 w/o enrichment UO2 fuel was used for the first set, and 2.6 w/o enrichment UO2 fuel was used for the measurements described in this report. The new results will be presented graphically, and for completeness, the details of the measurement will be included here as well as in HW-63585.

Four capsules containing Al-1.65 w/o Pu and Al-12 w/o Si-1.65 w/o Pu were charged into the MTR. These capsules will be irradiated to a burnup of 80-100% of the plutonium atoms to determine the stability of the material at high exposures. An additional sixteen capsules containing 5 to 20 w/o Pu in Al and Al-Si have been prepared. Eight are awaiting reactor space and should be charged soon. The remaining eight are being recanned to increase the end gap between the core and the can. Also four capsules containing high density UO2-PuO2 pellets canned in Zircaloy are awaiting assignment of reactor space.

A 19-rod Zircaloy-clad half-length PRTR spike element successfully irradiated to high plutonium burnout at full power in the ETR shoved partial bonding of the core and cladding. Unsatisfactory autoclave films on the Zircaloy cladding of the PRTR Al-Pu fuel elements are delaying final assembly of the first 30 clusters. Further conditioning of the autoclaves and the availability of permanent etching facilities are expected to correct the present difficulties.

Investigation of aqueous and steam corrosion at elevated temperature has been carried on at Hanford for several tears. A number of reports have been published on various phases of the corrosion program but, except for monthly reports, little has been written on the progress of the Corrosion and Coatings Operation alloy development program. This interim report will outline the more important current phases of the aluminum alloy program.

Introduction. High voltage silicon mass transistors have the ability to perform circuit functions similar to the gas thyratron tube. Upon being triggered the transistor junction breaks down, or "avalanches", and can conduct a large current for a short time. The rise time of the avalanche breakdown pulse can be short, and the delay between triggering and avalanching can be short and very consistent. This avalanche action is non-destructive if the amount of peak and average power being dissipated at the junction is limited by the circuitry.