From introduction: This report details the conceptual design of a 100 kw gas cooled reactor power plant of the type that would satisfy the electrical and space heating load of the Air Force distant early warning stations and might find application at other remote bases.

This document was prepared in response to a request from the Atomic Energy Commission for a brief review of the principal ideas and technical developments which might effect power levels over the following six years. Also requested were approximate data on any pile modifications that might be involved, including rough estimates covering possible cost and completion dates. A brief discussion of plans for increasing the power levels of the Hanford Piles is provided.

The purpose of this report is to present a conceptual design study on a low power electrical and heat generating plant powered by nuclear energy. The nuclear reactor used in this study is the homogeneous circulating fuel type.

For a body consisting of a fineness-ratio-3 ogival nose tangent to a cylindrical afterbody 7.3 diameters long, pitot-pressure distributions in the flow field, pressure distributions over the body, and downwash distributions along a line through the vortex centers have been measured for angles of attack to 20 degrees. The Reynolds numbers, based on body diameter, were 0.15 x 10 to the 6th power and 0.44 x 10 to the 6th power. Comparisons of computed and measured vortex paths and downwash distributions are made. (author).

None

During the history of operation of the Hanford reactors, several methods have been utilized to establish an outlet water temperature or ``Panellit`` limit based on the stability of water flowing through the process tubes. These methods have been known as ``Excess Header Pressure Limits,`` ``Trip Before Boiling Limits,`` and the most recent, ``Trip Before Instability Limits.`` Each new concept vas accepted only after considerable experimental data had proved the new method to be safe and operationally feasible. It is anticipated that in the future other tube outlet water temperature limits will be developed based on new technology. The purpose of this document is to present, in simple terms, an understandable explanation of previous operating limits, to discuss the status of the present Instability Limits, and to outline the direction of future work in raising the outlet water temperature limits.